Linmore LED AC2 ACE LED Canopy Instruction Manual
- June 2, 2024
- Linmore LED
Table of Contents
Linmore-LED-AC-ACE-LED-Canopy-product
Specifications
- Part No.: AC20S-A2-ADJ-MD-ADJ-80-CL-LV-FXT-S-10V
- Watts: 20 / 30 / 40
- CCT (Color Temperature): 3000K / 4000K / 5000K
- CRI (Color Rendering Index): 80
- Input Voltage: AC 120-277V
- Power Factor: 0.9
- Dimmable: 0-10V
- Warranty: 5 Years
Adjusting Wattage and Color Temperature
Fixtures ship with the highest wattage and 5000K CCT. To change settings:
- Turn off the fixture.
- Open the clear caps on the side with a screwdriver.
- Adjust dip switches to desired wattage and CCT.
- Close the fixture and caps tightly with a screwdriver.
Dimensions
- Width: 8.04 inches
- Height: 3.67 inches
- Depth: 8.04 inches
- Weight: ~3.90 lbs
Installation
Follow NEC and local codes. Ensure proper grounding. Use approved connectors. Be cautious of sharp edges and wear PPE. Avoid corrosive environments and thermal insulation. Use appropriate strain relief for power cord. Read manual before installation.
Maintenance
Ensure power is off before maintenance. Do not expose wiring to sharp objects.
Contact a qualified electrician if unsure. Clean fixture with a dry cloth. Do
not perform maintenance while energized.
Wiring
Follow wiring color codes: Green/Yellow (GND), Pink (DIM-), White/Blue (ACN),
Purple (DIM+), Black/Brown (ACL).
FAQ
Q: How do I adjust the wattage and color temperature of the fixture?
A: Follow the steps provided in the user manual to adjust the dip switches
inside the fixture.
INSTALLATION INSTRUCTIONS
ACE LED CANOPY (AC2)
- Fixtures must be installed and wired in accordance with the National Electrical Code (NEC) and all applicable local codes by a person familiar with the construction and operation of the product and hazards involved.
- Proper grounding is required for safety.
- Check that voltage is compatible with fixture driver, use approved connectors for all electrical connections.
- Be cautious of any sharp edges. Wear proper PPE (personal protected equipment) while handling.
- Fixture not suitable for use in corrosive environments, and with thermal insulation.
- Must use appropriate strain relief in accordance with local code when connecting power cord to junction box.
READ CAREFULLY BEFORE INSTALLING THE FIXTURE.
PLEASE KEEP THIS MANUAL FOR FUTURE USE.
WARNING
Risk of Fire or Electric Shock
- Risk of fire or electric shock. Make sure power is off at the circuit breaker before installing or maintaining the product.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Installation guide requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Never perform maintenance or cleaning while fixture is energized. Disconnect power and allow fixture to cool off before maintaining.
MAINTENANCE CAUTION
- Review the diagrams before beginning and make sure the fixture is grounded properly.
- For lighting controls, use driver wiring diagram.
- Maintenance must be done by qualified electricians.
- Use a clean, dry cloth to clean the fixture.
- For any questions regarding wiring, installation, or use of this fixture, please call 559-485-6010 or email techsupport@linmoreled.com
TECHNICAL SPECS
Part No.| Watts
(ADJ)
CCT| Input| (ADJ) CRI| PF| Voltage| Dimmable|
Warranty
---|---|---|---|---|---|---|---
AC20S-A2-ADJ-MD-ADJ-80-CL-LV-XT-S-10V| 20 / 30 / 40| 3000K
4000K
5000K
| ≥80| AC 120-277V| ≥0.9| 0-10V| 5 Years
Ambient range operation: -40°C up to 50°C (-40°F up to 122°F).
Adjusting Wattage and Color Temperature
Fixtures ship from the factory with the highest wattage and 5000K CCT, to
change these settings:
- Turn off the fixture.
- Open the clear caps on the side of the fixture with a screwdriver.
- Adjust the corresponding dip switches to desired wattage and CCT.
- Close the fixture and close the caps tight with a screwdriver.
Note: The ON/OFF switch is to enable or disable the photocell.
Wattage / Lumen Output
| Watts | Lumen Output |
|---|---|
| 20 | 2,700 |
| 30 | 4,050 |
| 40 (default) | 5,400 |
Typical lumen output (±10%) at 4000K CCT and 277V (LV) under 25°C ambient temperature.
|
---|---
| 0.926
| 1.000
| 0.963
Dimensions
Weight (lb)
~3.90
Dimension tolerances: ± 0.2”. Weights are approximate and vary depending on accessories used, if weight is a concern, please contact factory.
WIRING
Caution s
- Fixtures must be wired in accordance with the National Electrical Code (NEC) and all applicable local codes.
- Make sure power is off at the circuit breaker before installation or maintenance.
- Proper grounding is required to ensure safety.
Notes
- Must use appropriate strain relief in accordance with local code when connecting power cord to junction box.
INSTALLATION GUIDE
Pendant Mounting (Stem 3/4” Conduit Installation)
-
Connect wires in the 3/4” NPT stem following wiring instructions on page 3.
- Black / Brown ACL
- White / Blue ACN
- Green / Yellow GND
- Purple DIM+
-
- Pink DIM-
-
Screw the fixture to the 3/4” NPT stem.
Ceiling Installation
-
Remove the mounting plate from the fixture.
-
Drill holes on the ceiling to fit the mounting plate, then fix the plate with anchors and screws.
-
Hang the fixture by the plate as shown, then connect wires following wiring instructions on page 3.
-
Install the fixture to the plate, then fasten the screws on both sides of the fixture.
Linmore LED Labs, Inc. | 2360 S Orange Ave, Fresno CA 93725 | 559-485-6010 | linmoreled.com | info@linmoreled.com