Linmore LED AH1 Ace LED High Bay Instruction Manual
- June 9, 2024
- Linmore LED
Table of Contents
Linmore LED AH1 Ace LED High Bay
INSTRUCTION
READ CAREFULLY BEFORE INSTALLING THE FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USE.
- Fixtures must be installed and wired in accordance with the National Electrical Code (NEC) and all applicable local codes by a person familiar with the construction and operation of the product and hazards involved.
- Proper grounding is required for safety.
- Check that voltage is compatible with fixture driver, use approved connectors for all electrical connections.
- Be cautious of any sharp edges. Wear proper PPE (personal protected equipment) while handling.
- Fixture not suitable for use in wet locations, corrosive environments, and with thermal insulation.
WARNING: Risk of Fire or Electric Shock
- Risk of fire or electric shock. Make sure power is off at the circuit breaker before installing or maintaining the product.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Installation guide requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Never perform maintenance or cleaning while fixture is energized. Disconnect power and allow fixture to cool off before maintaining.
MAINTENANCE CAUTION
- Review the diagrams before beginning and make sure the fixture is grounded properly.
- For lighting controls, use driver wiring diagram. Maintenance must be done by qualified electricians. Use a clean, dry cloth to clean the fixture.
- For any questions regarding wiring, installation, or use of this fixture, please call 559-485-6010 or email techsupport@linmoreled.com
TECHNICAL SPECS
| | | | | | | |
---|---|---|---|---|---|---|---|---
AH10S-A2-12K-SM-50-80-FR-LV-CRM-S-10V| SM| 85|
AC
120-277V
|
≥0.9
|
5000K
|
≥80
|
0-10V
|
5 Years
AH10S-A2-15K-SM-50-80-FR-LV-CRM-S-10V| SM| 110
AH10S-A2-18K-SM-50-80-FR-LV-CRM-S-10V| SM| 130
AH10S-A2-24K-MD-50-80-FR-LV-CRM-S-10V| MD| 165
AH10S-A2-30K-MD-50-80-FR-LV-CRM-S-10V| MD| 220
AH10S-A2-40K-LG-50-80-FR-LV-CRM-S-10V| LG| 295
AH10S-A2-48K-LG-50-80-FR-LV-CRM-S-10V| LG| 320
Dimensions
14.2| 11.0| 1.9| ~4
18.1| 11.8| 1.9| ~6
23.0| 12.6| 1.9| ~8
WIRING
Cautions
- Fixtures must be wired in accordance with the National Electrical Code (NEC) and all applicable local codes.
- Make sure power is off at the circuit breaker before installation or maintenance.
- Proper grounding is required to ensure safety.
Notes: Must use appropriate strain relief in accordance with local code when connecting power cord to junction box.
NORMAL POWER WIRING
DIMMING WIRING
INSTALLATION GUIDE
Suspension Mounting
- Securely fasten the chain or cable to the ceiling / building infrastructure.
- Securely fasten the chain or cable to the provided V-clips.
Chain
Included in the fixture (standard).
Cable
Sold separately as an accessory (CABLEKIT).
Stem Mounting (3/4” Conduit Installation)
Requires bracket sold separately as an accessory (AH1-STEM).
- Mount bracket to 3/4” existing conduit.
- Attach fixture to the bracket.
- Connect the wires.
- Lock side brackets with screwdriver.
ACCESSOR
PIR Occupancy Sensor
- Use a screwdriver to remove the 1/2” plug from the sensor.
- Rotate sensor clockwise into socket and ensure contact is made. Do not over tighten. Set programming using remote control.
Wiring Diagram
Default Brightness| 100%
Hold Time| 10 min
Stand-by Dimming Level| 20%
Stand-by Time| 30 min
Linmore LED Labs, Inc. | 2360 S Orange Ave, Fresno CA 93725 | 559-485-6010 | linmoreled.com | info@linmoreled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>