LeonLite SF3 Low Voltage LED Deck Lights User Manual
- June 2, 2024
- LeonLite
Table of Contents
LeonLite SF3 Low Voltage LED Deck Lights
WARNING
- ALL electrical connections MUST be done following the local and National Electrical Code (N.E.C) standards. If you’re unfamiliar with proper electrical wiring connections, PLEASE contact and obtain the services of a qualified electrician. ONLY use UL or IEC approved wires for input/output connections.
- Take the fixture and accessories out of the package. Makes sure that none of the parts are missing,
- TURN OFF THE POWER before installing, inspecting, or removing the fixture. Use ALL necessary precautions while performing this procedure.,
- Consult with a qualified electrician to ensure the correct branch circuit conductor. Min 90°C supply conductors-
- DO NOT reverse the hot and neutral connections, otherwise, safety will be compromised,
- There are no lamps/bulbs to replace in this integrated LED fixture.
- Ensure that the fixture temperature is cool to touch_
- DO NOT clean or maintain when this fixture is energized.
PACKAGECONTENT
5W waterproof deck lights x 6
Screws x 12
Templates * 6
Mounting brackets x 6
Waterproof wire nuts x 12
Plastic anchors x 12
INSTALLATION
-
Check to see if the power supply voltage is 12-24V AC/DC before instilling. Then turn off the power
-
Drill holes as shown in Fig. 1. DO NOT drill the hole whose diameter is 0.4 inch if you don’t run the wires through a wall.
-
Insert the plastic anchors into the holes. Using screws, tighten the mounting bracken (Fig. 2)
-
Align the groove at the top of the fixture with the mounding bracket. Next, push the fixture forward until it fits against the wellie (Fig. 3)
-
Connect the wires by twisting the waterproof wire nuts clockwise. The installation is now complete (Fig. 4)
SPECIFICATION
SW Waterproof Deck Light
Power:| 5W
Voltage:| 12V-24V AC/OC
Working temperature| 4°F 140°F
Luminous flux:| 2501m
CRI:| >90
Color temperature:| 3000K Warm White
Material:| Aluminum
Beam angle·| 120°
TROUBLESHOOTING
- Make sure that the line voltage at the fixture 1s correct.
- Make sure that there is power at the lamp fixture 4es. If not. check all connections.
- Check to make sure that the fixture is properly grounded
If the fixture doesn’t work:
- Check the switch to make sure there aren’t any defects
- Check the fuse box/circuit barker for any trips, then check the wire connections
- Check the waterproof wire nuts to make sure that they are properly connected.
WARRANTY
LEONLITE warrants that this product is free from defects materials and workmanship for a period of 3 years from the day of purchase. If the product has been misused, damaged by accident or in any other way of improper use, If his warranty becomes void.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>