LEONLITE Smart Up and Down Wall Lamp User Manual

LEONLITE Smart Up and Down Wall Lamp

DOWNLOAD LITEDGE APP

PACKAGE CONTENT

PRODUCT FEATURES

IMPORTANT SAFETY INSTRUCTIONS

• Here are some basic guidelines for working with electricity.
• Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls that circuit.
• Tape a sign to the panel warning others to leave the circuit alone while you work.
• Before touching any wires, use a voltage tester to make sure they are not live.
• Whenever you check for voltage in a receptacle, check both outlets – each may be controlled by a separate wiring circuit.
• When replacing fuses, turn off the main power first. Make sure your hands and feet are dry and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
• Use tools with insulated handles and ladders made of wood or fiberglass.
• To protect children, place safety cover over any unused outlets.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• CAUTION: Before installation, refer to electrical connections. If you do not have electrical wiring experience, refer to a do-it-yourself wiring handbook or have your light installed by a qualified licensed electrician.

INSTALLATION

A. J-BOX MOUNTING

1. Turn off the main power switch before installation.
2. Secure the mounting plate to the electrical junction box. Keep it upright and level.
3. Connect wires with wire nuts.
4. Attach the light to the mounting plate, then secure it with included screws.
   • B. WALL MOUNTING
   • Attach the mounting plate to the wall. Use the drill bit to drill 4 holes then insert the wall anchors.
   • Secure the mounting plate to the wall with screws. Keep it up-right and level.
5. Flip the switch to bring your light back to life. Keep an eye out – when it starts blinking, you’ll know that it’s ready for a connection with your smartphone. If not, cycle the power OFF-ON five times and watch as everything resets itself into pairing mode.
6. Link to online quick start guide.

LeonLite Product innovation has always been a critical driver of LEONLITE’s business. In a highly competitive industry, we constantly strive to develop new products that offer homeowners unique advantages in terms of style, installation, and energy efficiency. In addition, our products meet the industry’s strictest safety and performance standards to ensure product quality.

DOWNLOAD LITEDGE APP

NOTE Allow Access to Bluetooth

• You are advised to enable Bluetooth.
• Enable Bluetooth to add some Wi-Fi devices easily.

PRODUCT FEATURES

WARNING & DISCLAIMER
Proper setup of this device requires blinking lights. Please take precautions during the activation process, and avoid direct eye contact with or placing a cover over the light until successful pairing is complete to prevent potential discomfort or photosensitive seizure.

SINGLE LIGHT PAIRING AND CONNECTION

1. Register and login.
2. To set the light to pairing mode, simply turn it OFF-ON five times and watch as it begins blinking.
3. Press + while the light is still in pairing mode (blinking).
4. Press Go to add” button.
5. Select the light and press+.
6. Input WIFI name & password.
7. Connecting
8. Successfully added.

MULTIPLE LIGHTS PAIRING AND CONNECTION

1. Register and log in.
2. To set the lights to pairing mode, simply turn them OFF-ON five times and watch as they begin blinking.
3. Press + while the lights are still in pairing mode (blinking).
4. Press Go to add” button.
5. Select a light and press ” + “to add it to the App.
6. Input the WIFI name & password.
7. Connecting.
8. Successfully added.
9. Complete each light connection one at a time, proceeding in order from Steps 5 to 8 until all connections are established.

FEATURE

Group-Control Multiple Lights

TROUBLESHOOTING

• Time-Out During Multiple Lights Pairing

• Some lights fail to connect due to time-out when connecting multiple lights.

• Toggle the lights) OFF and then ON again to reset the time-out lights).

• Now pair the remaining lights with LITEdge App and further illuminate your space!

1. Tap
2. Create a group
3. Select the lights that you’d like to add to the group.
4. Success.

FEATURE

Pairing with Remote

1. Extract the plastic insert at the back to activate the battery.
2. Power on the light.
3. To pair the remote with your light, press and hold the top-left button for five seconds. If there is difficulty in establishing connectivity between them, switch off and then reactivate the light before trying again.
4. Success.

Light Lost Connection with Remote/ Reset Remote

The light connects to the App successfully but fails to connect to the remote.

1. To initiate a remote reset, power on the light and simultaneously press down the “ON” and “Brightness -” buttons for five seconds.

Control Multiple Lights with a Remote

Need to command multiple lights at once? With a few simple steps, you could easily create an efficient remote setup. Let’s get started!

Ensure a successful pairing of your remote control, powering down and back on the light, then pressing and holding the ON button for five seconds.

One of All Lights Lost the Connection

If one of the lights in your group is disconnected, there are steps you can take to easily re-establish a connection.

Method 1: Reset and pair the disconnected light individually (efficient but may require professional knowledge).

1. Turn off the main power/switch.
2. Remove the disconnected light from the system.
3. Power on the light individually, reset, and connect.
4. Mount it back.
5. Add the light back to the existing group.
6. Success.

Method 2: Reset and pair the whole system (easy but maybe time- consuming).

1. Reset by a wall switch.
2. Reset all lights (ON-OFF x 5, then ON)
3. Pair all lights.
4. Create a group/Add to a group (If necessary).

Success.

OTHER

FREQUENTLY ASKED QUESTIONS

1. How do I share devices with other users?

   • You can share your LITEdge smart devices via the LITEdge App. Tap the “Me” icon on the bottom right corner) and select “Home Setting”, then tap the home you want to share (e.g. John’s home) to enter the Home Settings page.
   • In the home setting page, select “Add Member” then you can share your devices by adding other’s LITEdge account or inviting them by text message or email.

2. How do I group multiple devices together?

   • If you are using the Alexa or Google Home App to control your smart devices, you can follow their “Add to home” process. They will guide you to link your LITEdge smart devices to your Alexa or Google Home App and help you to create a room to group them.
   • If you are using the LITEdge App (recommended, for accessing more features and advanced settings) to control your smart devices, simply tap the device icon from your main device list, tap the “pencil” icon, and select “Create Group”. Then, you can easily add your preferred devices to a group and control them all together.

3. How many devices can I control?

   • Our App can control an unlimited number of devices. Maybe there is a limit on the number of devices that can be connected to your router.

4. My device has a funny name, how do I rename it?
   From your main device list, tap the device whose name you want to change. Then tap the “pencil” icon beside the default device name. You’ll then be able to rename the device.

5. What should I do if the device is offline or disconnected?

   • Typically, when this happened, just unpair and pair the device again and it will work. But before doing that, please make sure your Wi-Fi router is online and in range (ie., you have the internet). If it doesn’t fix, feel free to call us at +1 800-990-7688 and we will provide you with help.

6. How far will my Wi-Fi signal reach?

   • The range of your home Wi-Fi is mostly dependent on your home router and the conditions of the room. Check the specifications of your router for exact data.

7. If my Wi-Fi/Internet goes down, will my app still work?

   • Our products/Apps need to be connected to Wi-Fi and the internet to be used remotely.

8. How do I remove devices?

   • Open the LITEdge App. Tap on the device icon from your main device list, tap the “pencil” icon, and select “Remove Device”.
   • When the device is removed successfully, the LED indicator will start to blink.
   • NOTE: REMOVING THE DEVICE WILL ERASE THE CONNECTION SETTING OF THE SMART LIGHT. YOU MAY NEED TO PAIR IT AGAIN TO RECONNECT.

TROUBLESHOOTING

1. Can not connect to Wi-Fi?
   • Make sure you entered the correct Wi-Fi password. Check if there is an internet connection problem. Check if the
   • The Wi-Fi signal is too weak to set up.
2. Do I need Hub or Zigbee?
   • No hub is required. You can connect the product directly to your Wi-Fi network.
   • Need more help? We are always here to help! Contact us by visiting https://www.leonlite.com/contact or calling +1 (800) 990-7688

• TORCHSTAR CORP
• LeonLite
• LITEdge
• 3768 Milliken Ave, Suit A
• Eastvale, CA 91752
• Questions or Comments
• 1-800-990-7688
• info@leonlite.com
• www.leonlite.com
• © 2022 TORCHSTAR CORP
• All rights reserved

Documents / Resources

| LEONLITE Smart Up and Down Wall Lamp [pdf] User Manual
Smart Up and Down Wall Lamp, Down Wall Lamp, Wall Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>