PHILIPS BGP293 LumiStreet gen2 Medium LED User Guide
- June 2, 2024
- Philips
Table of Contents
PHILIPS BGP293 LumiStreet gen2 Medium LED
Specifications
- Lighting: LumiStreet gen2 BGP293 LED80-4S/740 II DM31 MSP CLO SRTH
- Lamp family code: LED80 [LED module 8000 lm]
- Light source replaceable: Yes
- Number of gear units : 1 unit
- Driver included: Yes
- Safety class: II
- Distribution: Medium 31
- Post-top for diameter : 48 mm
Product Usage Instructions
Light Technical Details:
- Upward light output ratio
- Luminous Flux
- Standard tilt angle posttop
- Standard tilt angle side entry
- Correlated Color Temperature (Nom)
- Luminous Efficacy (rated) (Nom)
- Color rendering index (CRI)
- Light source color
- Optical cover type
- Luminaire light beam spread
- Optic type outdoor
Operating and Electrical:
- Input Voltage: 220 to 240 V
- Line Frequency: 50 to 60 Hz
- Power Consumption: 44.5 W
- Power Factor (Fraction): 0.89
- Controls and Dimming: Dimmable
- Connection: 2 Push-in connector 5-pole
Mechanical and Housing:
- Housing Material: Aluminum die cast
- Reflector material: Polycarbonate
- Optic material: Polymethyl methacrylate
- Optical cover material: Glass
- Housing Color: Gray
- Ingress protection code: IP66 [Dust penetration-protected, jet-proof]
Approval and Application:
- Ingress protection code: IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code: IK08 [5 J vandal-protected]
- Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
FAQ (Frequently Asked Questions)
-
Is the LumiStreet gen2 suitable for outdoor use?
Yes, the Lumistreet gen2 is designed for outdoor use with an IP66 rating for dust penetration and jet-proof protection. -
Can the LumiStreet gen2 be dimmed?
Yes, the LumiStreet gen2 is dimmable for customizable lighting options. -
What is the warranty period for the LumiStreet gen2?
The Lumistreet gen2 comes with a 5-year warranty period for added peace of mind.
INTRODUCTION
- LumiStreet gen2 Medium, LED module 8000 lm, 740 neutral white, Safety class II, Distribution medium 31, Post-top for diameter 48 mm
- Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
- General Information
- Lamp family code LED80 [LED module 8000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Remarks * At extreme ambient temperatures the luminaire might automatically dim down to protect components
- Light source engine type LED
- Service tag Yes
- Product family code BGP293 [LumiStreet gen2 Medium]
- Lighting Technology LED
- Value ladder Specification
- CE mark Yes
- Warranty period 5 years
- Flammability mark For mounting on normally flammable surfaces
- ENEC mark ENEC plus mark
- EU RoHS compliant Yes
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
- Light Technical
- Upward light output ratio 0
- Luminous Flux 6,864 lm
- Standard tilt angle posttop 0°
- Standard tilt angle side entry 0°
- Correlated Color Temperature (Nom) 4000 K
- Luminous Efficacy (rated) (Nom) 156 lm/W
- Color rendering index (CRI) 70
- Light source color 740 neutral white
- Optical cover type Flat glass
- Luminaire light beam spread –
- Optic type outdoor Distribution medium 31
- Operating and Electrical
- Input Voltage 220 to 240 V
- Line Frequency 50 to 60 Hz
- Initial CLO power consumption 45.5 W
- Average CLO power consumption 45.5 W
- End CLO power consumption 46 W
- Inrush current 53 A
- Inrush time 0.3 ms
- Power Consumption 44.5 W
- Power Factor (Fraction) 0.89
- Connection 2 Push-in connector 5-pole
- Cable –
- Number of products on MCB of 16 A type B 15
- Temperature
- Ambient temperature range -40 to +50 °C
- Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating with constant light output
- Control interface –
- Constant light output Yes
- Mechanical and Housing
- Housing Material Aluminum die cast
- Reflector material Polycarbonate
- Optic material Polymethyl methacrylate
- Optical cover material Glass
- Fixation material Aluminum
- Housing Color Gray
- Mounting device Post-top for diameter 48 mm
- Optical cover shape Flat
- Optical cover finish Clear
- Overall length 626 mm
- Overall width 340 mm
- Overall height 195 mm
- Effective projected area 0.0246 m²
- Dimensions (Height x Width x Depth) 195 x 340 x 626 mm
- Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK08 [5 J vandal-protected]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
- Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.381, 0.379) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
- Over Time Performance (IEC Compliant)
- Control gear failure rate at median useful life 100000 h 10 %
- **Lumen maintenance at median useful life* 100000 h** L100
- Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level 0% (digital)
- Product Data
- Order product name BGP293 LED80-4S/740 II DM31 MSP CLO SRTH
- Full product name BGP293 LED80-4S/740 II DM31 MSP CLO SRTH
- Full product code 871951410183800
- Order code 910925866920
- Material Nr. (12NC) 910925866920
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8719514101838
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514101838
Dimensional drawing
Rights Reserved
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>