BLUSTREAM HEX70SL-RX HDBaseT Transmitter And Receiver Instructions
- June 2, 2024
- BLUSTREAM
Table of Contents
BLUE STREAM HEX70SL-RX HDBaseT Transmitter And Receiver
Specifications
- Output Distance: 40m – 100m
- Input Distance: 40m – 100m
- Power: 12v – 24v
- Compatibility: Blustream HDBaseT receivers and transmitters
Product Usage Instructions
Receiver Compatibility Guide
When setting up your Blustream HDBaseT receiver, ensure to use the recommended receivers for optimal performance:
- For 18Gbps CSC and ARC, use RX70CS
- For 18Gbps CSC, use RX70CS
- For features like IR, RS-232, and ARC, use RX150CS
Transmitter Compatibility Guide
When setting up your Blustream HDBaseT transmitter, follow these guidelines:
- Auto-switching capabilities can be used with HEX31WP-TX
- HDBaseT input card does not provide PoC to the Transmitter unit
Note on Interoperability and Power
Please be aware of the following important notes:
- Most HDBaseT transmitter and receiver equipment can be connected for HDMI signals up to 10.2Gbps.
- Colour Space Conversion (CSC) is implemented by Blustream for supporting 18Gbps signals.
- Using a power scheme not compatible with PoC can lead to product failure.
FAQ
- Q: Can I mix Blustream products with other manufacturers’ equipment?
- A: Most HDBaseT equipment can be connected for standard signals, but CSC may not be interoperable with other brands.
- Q: What happens if I use differing PoC voltages with Blustream products?
- A : Using differing PoC voltages can lead to product failure and damage to equipment.
SPECIFICATIONS
Indicates the recommended Blustream HDBaseT receiver/s
Indicates compatible Blustream HDBaseT receiver/s 
Please note : standard interoperability of the Valens IC for HDBaseT will mean that most HDBaseT transmitter and receiver equipment can be connected to obtain HDMI signals up to 10.2Gbps (4K 60Hz 4:2:0 / 4K 30Hz 4:4:4), embedded audio, InfraRed, and RS-232 pass-through. Colour Space Conversion (CSC) is a protocol Blustream implements to allow for 18Gbps signals to be supported over the standard 8Gbps link in HDBaseT Specifications 1.0 and 2.0 – this will not be interoperable with other manufacturers equipment.
Blustream uses PoC (Power over Cable) which is not the standard format for power in HDBaseT (PoH). Using a power scheme not compatible, or differing PoC voltages when mixing products, can lead to product failure and damage to equipment. The PoC voltages of Blustream equipment are all listed in the above table.
The Blustream EX40B and CEX4K extenders do not feature HDBaseT technology and are not compatible with any other Blustream products.