CELESTE BT1600WH-167F Lucera Bathtubs Instruction Manual
- June 15, 2024
- CELESTE
Table of Contents
CELESTE BT1600WH-167F Lucera Bathtubs
Product Information
Product Name: CELESTE LUCERA 167 BT1600WH-167F
Specifications
- Feet: A
- Drain: A
- Bathtub Foot Article number: TJLG.M12
- Pop Up Drain Article number: D9-1-WH
- Drain pipe Article number: XBG-L
Tools and Materials Required
- Feet
- Drain
Maintenance
The bathtub is made of acryl and can be cleaned with a damp cloth and water with a mild detergent. Household detergents with aggressive, chlorinated and/or abrasive constituents may not be used because this will damage the surface of the bathtub. Limescale can best be removed with a product based on citric acid. However, never use acetic acid, as the acryl surface material will be irreversibly damaged.
Product Usage Instructions
-
Step 1: Installation
Follow the instructions on Page 2 for installing the bathtub feet (Article number TJLG.M12). -
Step 2:
Refer to Page 3 for further installation instructions. -
Step 3:
Continue with the installation process as described on Page 3. -
Step 4:
Proceed to follow the instructions on Page 4 for the next steps of installation. -
Step 5:
Refer to Page 4 for additional installation steps. -
Step 6:
Complete the installation process by following the instructions on Page 5. Apply silicone sanitary measures as described.
FAQ
How should I clean the bathtub?
The bathtub should be cleaned with a damp cloth and water with a mild
detergent. Avoid using aggressive, chlorinated, or abrasive detergents as they
may damage the surface. For limescale removal, use a product based on citric
acid. Do not use acetic acid as it will irreversibly damage the acryl surface
material.
TOOLS AND MATERIALS REQUIRED
Feet
Drain
WARNING: Inspect the bathtub for damage before installation000
INSTALLATION
- Step 1: Fit the drain hose to the bathtub drain stopper. Tighten carefully
- Step 2: Adjust the legs to the same height, and make sure that they are at the same level as the underside of the bathtub.
- **Step 3
**
- Step 4: Adjust the legs so that the bathtub is leveled.
-
Step 5: If the bathtub is not stable, apply some silicone under the feet
- Step 6: Important! Do not put silicone between the floor and the bathtub
Maintenance
The bathtub is made of acryl and can be cleaned with a damp cloth and water with a mild detergent. Household detergents with aggressive, chlorinated and/or abrasive constituents may not be used because this will damage the surface of the bathtub. Limescale can best be removed with a product based on citric acid. However, never use acetic acid, the acryl surface material will be irreversible damaged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>