CELESTE BT1100MW-167F Treviso Bathtub Instruction Manual
- June 14, 2024
- CELESTE
Table of Contents
CELESTE BT1100MW-167F Treviso Bathtub
TOOLS AND MATERIALS REQUIRED
Feet
Drain
Inspect the bathtub for damage before installation
INSTALLATION
Step 1
- Fit the drain hose to the bathtub drain stopper. Tighten carefully
Step 2
- Adjust the legs to the same height, and make sure that they are at the same level as the underside of the bathtub
Step 3
Step 4
Adjust the legs so that the bathtub is levelled
Step 5
- If the bathtub is not stable, apply some silicone under the feet
Step 6
- Important! Do not put silicone between the floor and the bathtub
Maintenance
The bathtub is made of acryl and can be cleaned with a damp cloth and water with a mild detergent. Household detergents with aggressive, chlorinated and/or abrasive constituents may not be used because this will damage the surface of the bathtub. Limescale can best be removed with a product based on citric acid. However, never use acetic acid, the acryl surface material will be irreversibly damaged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>