RICH SOLAR RS-V30 3000 Watt 12 Volt Industrial Pure Sine Wave Inverter User Manual

RICH SOLAR RS-V30 3000 Watt 12 Volt Industrial Pure Sine Wave Inverter

MODELS AND DENOTATIONS

SAFETY FIRST

WARNING! Shock hazard. Keep away from children.

1. The inverter generates the same potentially lethal AC power as a normal household wall outlet. Treat it as if you are using any other AC outlet.
2. Do not insert foreign objects into the inverter’s AC outlet, fan or vent openings.
3. Do not expose the inverter to water, rain, snow or spray.
4. Do not under any circumstance connect the inverter to AC power.

WARNING! Heated surface.
The inverter housing may become uncomfortably warm, reaching 140F (60°() under extended high-power operation. Ensure at least 2 inches (5cm) of air space is maintained on all sides of the inverter. During operation, keep away from materials that may be affected by high temperatures.
WARNING! Explosion hazard.
Do not use the inverter in the presence of flammable fumes or gases, such as in the bilge of a gasoline-powered boat, or near a propane tank. Do not use the inverter in an enclosure containing automotive-type, wet lead-acid batteries. These batteries, unlike sealed batteries emit explosive hydrogen generated gas which can be ignited by sparks from electrical connections.

CAUTION!

1. Do not connect live AC power to the inverter’s AC outlets. The inverter will be damaged even if it is switched OFF.
2. Do not expose the inverter to temperatures exceeding 104F (40°C)

 PRODUCT FEATURES AND APPLICATIONS

Product Features

• A pure sine wave or modified sine wave
• Soft start
• PWM (Pulse Width Modulation)
• Microprocessor-based design
• With power ON/OFF switch and LED indicator
• Overload protection / Over voltage protection / Short Circuit protection / Over temperature protection / Reverse polarity protection (by fuses)

Product Applications

• Power tools; Electric Saw, Drilling Machine, Grinder, Sand Blast Machine, Punching Machine, Weeding Machine, Air Compressor etc.
• Office Applications; Computer, Printer, LCD Monitor, Scanner etc.
• Household Appliance Applications; Vacuum Cleaner, Fan, Lamp or LED, Sewing Machine etc.
• Kitchen Appliance Applications; Microwave, Fridge, Freezer, Coffee maker etc.

PURE SINE WAVE AND MODIFIED SINE WAVE INVERTERS

The inverter comes in two types:

• pure sine wave power type and modified sine wave type. In the pure sine wave power inverter, the 240V AC output follows a smooth Sinusoidal sine wave and is almost identical to normal mains electricity.
• A Graphic Comparison of Modified Sine Wave and Pure Sine Wave is shown below:

GUIDELINES

Installation Conditions
For safe and optimum performance install the inverter in a location that is:

1. Dry-Do not expose to water drips or spray.
2. Cool-Operate only in ambient temperatures between 32F (0°C) and 104F (40°C). Keep away from heating vents or other heat-producing equipment.
3. Safe-Do not install inverter in a compartment with batteries or flammable liquids, such as gasoline or explosive vapors.
4. Well ventilated-Allow at least 2 inches (5cm) clearance above and on all sides of the unit for proper cooling.
5. Clean and free of dust and dirt-This is especially important if the inverter is used in a dusty working environment. Select a Suitable Location.

Working Principle
The inverter works in two stages. During the first stage, the DC to DC converter increases the DC input voltage from the power source (e.g., A 12V battery) to 300V DC In the second stage, the high-voltage DC is converted to the watts (power) you need (AC) using advanced power MOSfet transistors or IGBT technology in a full bridge configuration. The result is excellent overload capability and the capacity to operate difficult reactive loads Connection Method
CAUTION
A reverse polarity connection (positive to negative) may damage the inverter (Fuse) Damage caused by a reverse polarity connection would probably invalidate your warranty.

WARNING: Sparking may occur when connecting the DC supply unit to the battery, make sure no flammable fumes are present before making any connections.

1. Attach the ring type connector marked with red to the positive ( +) DC terminal on the inverter and attach the ring connector marked with black to the negative(-) DC terminal.
2. Tighten both DC terminals by hand until tight. If the power is more than 1800w, please use tools to tighten up the screw.
3. When the inverter is not in use, unplug it from the 12V DC outlet to avoid any battery discharge.

Battery’s Charge
We advise that you use a deep cycle battery. If you hear the low voltage alarm, stop the inverter immediately. When the battery is fully charged, the inverter can be used again. It is not recommended to use from a vehicle battery.

Inverter’s Working Status

1. When a 12V DC outlet or battery is properly connected to the inverter, turn on the ON/OFF, the green Power indicator will light, and it deliver AC power to the outlets.
2. Plug the AC appliances you wish to operate into the AC outlet (s) and switch your appliances on, switch one at a time.
3. If the audible alarm is ignored the inverter may be automatically shut down when the battery voltage drops to 9.8-10.2V in order to prevent damage to the battery from excessive discharge.
4. If the AC appliances rated power is higher than inverters rating (or the appliance draws excessive surge power) the inverter will shut down. The red FAULT indicator will light.
5. If the inverter exceeds a safe operating temperature, due to insufficient ventilation or a high surrounding temperature, it will automatically shut down. The FAULT indicator will light, and the audio warning alarm will sound.
6. If a defective battery charge system has caused the battery voltage to rise to a dangerously high level, the inverter will automatically shut down.
7. The cooling fan is designed to operate only when the temperature goes up or when the loads are applied.

NOTICE: When you connect to the appliances, remember to turn on the inverter before turning on the appliance.

CAUTION: Although the inverter incorporates the protection function against over-voltage, there would be still the possibility of getting the unit damaged if the input voltage exceeds 16V.

INVERTER IMAGES

1. Modified sine wave 300W-600W

2. Pure sine wave 300W-600W
   Power (Green) and Fault (Red) Indicate

3. Modified sine wave 1000W-2000W

4. Pure sine wave 1000W-2000W

5. Modified sine wave 3000W-6000W

6. Pure sine wave 3000W-6000W

INVERTER TO BATTERY CONNECTIONS DETAILS

TROUBLE SHOOTING

:1€ AC appliances do not work, and the green power indicator does not light.

CAUSES

|

SOLUTION

Bad battery

|

Check the battery, replace it if necessary

Reverse connection of negative and positive poles

| Correct the connection to battery, the inverter may be

damaged.

Replace the fuse inside inverter (outside warranty coverage)

Loose connection of cables

| Check the cables and the connection, screw tight the wiring terminal
:1€ The electric appliance does not work, and the red FAULT indicator of the inverter is lit.

CAUSES

|

SOLUTION

Overload shut off due to rated power of appliances exceeding the inverter’s rated power

|

Use appliances having power below the inverter’s rated power

Overload shut off due to a too high surge current| Increase inverter power

CAUSES

|

SOLUTION

The battery is over discharged (inverter sounds an alarm)| Replace the battery or use battery charger to charge your battery

Over temperature shut off due to bad ventilation

|

Switch off the inverter and let it cool for 15 minutes. Clear objects around the fan and the inverter. Place the inverter in a cool place. Reduce load according to requirements. Restart

Too large input current

| Check the working state of the charging system. Make sure the output voltage of the battery is within the proper voltage
The measured output current of the inverter is too low

CAUSES

|

SOLUTION

Amp is too low

| Measure modified sine wave with a real effective value multimeter to get the accurate data

Amp supplied is too low

|

Charge the battery or change battery

The inverter gives out alarm sound.

CAUSES

|

SOLUTION

Low voltage alarm (Voltage Drop)

| Shorten the wire or use wider cable.

Charge the battery.

Over temperature protection (Component Temp/ Ambient Temp)|

Allow the Inverter to cool.

Improve ventilation around the inverter.

AC appliances draw too much power

|

Use larger capacity inverter.

Poor connection

|

Check the connection and tighten it.

SPECIFICATIONS

12V
OUTPUT WAVEFORM| Pure sine wave or Modified sine wave

AVAILABLE PIUGS AND SOCKETS

PIUGS

SOCKETS

Preface
Thank you for purchasing our Power Inverter. This is a compact and highly portable power inverter which has an excellent track record in the field of high frequency inverters. From the 12V DC outlet in your applications e.g., vehicle or boat, or directly from a dedicated 12V DC battery, this inverter can efficiently and reliably power a wide variety of household AC products, such as TV, Computers, Air-conditioning units etc. Please read this guide before installing or using the inverter and save it for future reference. Due to our continuous work to upgrade and improve our products, we may change or revise the contents of this manual instructions or any part of it

contact

• 1-800-831-9889
• sales@richsolar.com
• www.richsolar.com
• 5550 Jurupa St, Ontario, CA 91761

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>