FRIGIDAIRE A23549801 Dishwasher User Guide

: June 2, 2024
: Frigidaire

Table of Contents

FRIGIDAIRE A23549801 Dishwasher
INTRODUCTION
IMPORTANT SAFETY INFORMATION
FEATURES
CONTROLS AND SETTINGS
OPERATING INSTRUCTIONS
CARE AND CLEANING
TROUBLESHOOTING
LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FRIGIDAIRE A23549801 Dishwasher

Dishwasher use & care

INTRODUCTION

Welcome to our family

Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together.
This manual is your resource for the use and care of your product. Please read
it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues.
FAQs, helpful tips and videos, cleaning products, and kitchen and home accessories are available at www.frigidaire.com.
We are here for you! Visit our website, chat with an agent, or call us if you need help. We may be able to help you avoid a service visit. If you do need service, we can get that started for you.
Let’s make it official! Be sure to register your product.
Keep your product info here so it’s easy to find.
- Model Number
- Serial Number
- Purchase Date

NOTE

Very Important Information – Read Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most dishwashers – IT’S QUIETER.
Your Precision Direct Wash System dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may-or may not- hear the drain motor.
The next sound you will hear is the splashing water as it enters the tub. Then the lower arm rotates and circulates water. This is followed by a pause and a slightly different sound as the upper arms spray water. If you listen closely, you will hear the change in sound as the wash action switches from one arm to the other.
PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON’T hear.

NOTE
Why Energy Efficient Units run long cycles: Several factors are important to washing dishware. The energy use of the dishwasher was reduced by applying more of the factors that don’t use so much energy and less of the ones that use more. As a result, you will see that the wash cycles take longer.

NOTE
The filters will need to be cleaned to maximize wash performance during the life of your dishwasher. See “Recommended Frequency to Clean Your Filters” for a cleaning schedule.

IMPORTANT SAFETY INFORMATION

WARNING
When using your dishwasher, follow basic precautions, including the following:

For your Safety:

Use your dishwasher only as instructed in this Use and Care Manual.
This Manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating and maintaining any appliance.
NSF certified residential dishwashers are not intended for licensed food establishments.
DISHWASHER MUST BE ELECTRICALLY GROUNDED. Read the Installation Instructions for details.
This dishwasher is designed to operate on regular house current (120V, 60Hz). Use a circuit equipped with a 15 ampere fuse or circuit breaker. Use a 20 ampere fuse if dishwasher is connected with a food disposer.
Do not operate dishwasher unless all enclosure panels are in their proper place.
To avoid entrapment and/ or suffocation, remove door or door latch mechanism from any dishwasher that is discarded or not in use.
Keep young children and infants away from dishwasher when it is operating.
Do not let children abuse, sit, stand or play on door or racks of a dishwasher.
Use only detergents and rinse agents recommended for use in a dishwasher.
Store dishwasher detergent and rinse agents out of the reach of children.
Do not wash plastic items unless marked: “Dishwasher Safe” or equivalent. Check with manufacturer for recommendations, if not marked. Items that are not marked dishwasher safe may melt and create a potential fire hazard.
Disconnect electrical power to dishwasher before servicing.
If the dishwasher drains into a food disposer, make sure disposer is completely empty before running dishwasher.
Repairs should be done by a qualified technician.
Do not tamper with controls.
Do not touch the heating element during or immediately after wash has completed.
Use care unloading the dishwasher when the Sanitize option has been selected. Contents may be hot to the touch immediately after the end of cycle.
Water vapor from the vent may be hot to the touch when the Sanitize option has been selected. Use care and do not let small children play around or touch the vent area of the dishwasher.
When loading items to be washed:
Locate sharp items and knives so that they are not likely to damage the door seal or tub.
Load sharp items and knives with the handles up to reduce the risk of cut-type injuries.
Under certain conditions, hydrogen gas may be produced in a hot water, system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If hot water system has not been used for such a period, before using dishwasher, turn on for several minutes This will release any accumulated hydrogen gas. HYDROGEN GAS IS FLAMMABLE. Do not smoke or use an open flame during this time.
Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WARNING
To reduce the risk of fire, electrical shock or injury when using your dishwasher, follow the previous basic precautions .

WARNING
Please read all instructions before using this appliance.

Safety Definitions
This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.

Child Safety
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the dishwasher is unpacked. Children should never use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.

Safety Instructions

DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come
in contact with other appliances or furniture.

SAVE THESE INSTRUCTIONS

FEATURES

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading, then fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles go through and across the filter and down the drain as the water is pumped out. This series of steps are repeated as needed. The number of water fills varies with the cycle being used. Features may vary according to model

A| Spray Arm| | G| Heating Element|
---|---|---|---|---|---
B| Top Rack| H| Detergent Dispenser|
C| Serial Label (located on right side of door)| I| Rinse Aid|
J| Overfill Protector|
D| Silverware Basket|
K| Lower Spray Arm|
E| Lower Rack|
L| Middle Spray Arm|
F| Glass trap|
|

IMPORTANT
Accessories are available for your appliance and may be purchased at Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in Canada) or from an authorized seller.

CONTROLS AND SETTINGS

$FRIGIDAIRE-A23549801-Dishwasher-fig- $2$$

NOTE
Your dishwasher uses a DishSenseTM Technology to understand how much food is on the dishes and then adjusts the cycle accordingly.
CAUTION
Property Damage Hazard
Before starting dishwasher be sure that the water is connected and turned on. Failure to do so may cause damage to the pump seal and result in water leakage.
NOTE
The dishwasher is programmed to remember your last cycle so you do not have to reset each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/CANCEL pad.

Recommended Cycle for typical use:
The Normal cycle with its factory default options of normal temperature and heated dry together provide the best all around performance. This cycle selection is recommended for everyday use and is suitable for a large range of both dish load sizes and food quantities remaining on those dishes.

NOTE
Not all cycles and options available on all models.

Option Selections

Wash Cycle Selections:
Cycle times are approximate and will vary with options selected.
Hot water is necessary to activate dishwasher detergent and melt fatty food soils. An automatic sensor
will check the incoming water temperature and, if it is not hot enough, the cycle will be lengthened for automatic water heating in the main wash and final rinse of all cycles. This happens even when High temp wash option has not been selected. When High temp wash is selected, an even higher temperature will be reached to handle heavier soil loads.
Temp
The programmed cycles default to the Normal cycle option, to choose Sanitize or High, press the Temp pad.
Sanitize Option
To sanitize your dishes and glassware, select Sanitize option. When selected, the light will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 155oF (68oC) and will maintain that temperature for 9 minutes. This option is available in Heavy and Normal Cycles. Only these sanitization cycles have been designed to meet NSF requirements.
The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120oF (49oC).
The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120oF (49oC).
To turn off the Sanitize option, press the Temp pad a second time. The light beside the Sanitize pad will turn off.
High Temp Option
When the High Temp option is selected, the dishwasher heats water in the main wash to approximately 155oF (68oC).
This increase in water temperature helps the dishwasher detergent remove food grease and soil from dishes more effectively and aids in improved drying performance.
When the High Temp option is selected, the High Temp indicator illuminates and remains on until the end of the cycle. To turn off the High Temp option, press the Temp pad to select a different temperature option.
Max Dry
When the Max Dry option is selected, the dishwasher extends drying time by approximately 20 minutes. The Max Dry option can be used with all cycles except. For best drying performance, also apply an increased wash temperature by selecting High Temp or even better, the Sanitize option.
The energy required to use the Max Dry option costs pennies per cycle. You may choose not to select the Max Dry option; however you may have items in your dish load that will not be completely dry at the end of the cycle.
Heat Dry
The Heat Dry option in combination with rinse aid will enhance drying performance. The energy required to use the Heat Dry option costs pennies per cycle; however you will have items in your dish load that will not be completely dry at the end of the cycle.
Select the Normal Wash and High Temp Wash Option along with a Rinse Aid agent for improved drying performance.
Delay Time
The Delay Start option allows you
to automatically delay starting your dishwasher for 4 hours.
To activate delay start option for 4 hour delay, press and hold the Dry pad for 3 seconds. A light will come on indicating the delay start hours and will remain on until cycle starts. Press the START/CANCEL pad to start the delay option. If the delay option is interrupted, press the START/CANCEL pad again to return to the delay option.
To cancel the Delay Start option and begin the cycle before the delay period is over, press and hold the START/CANCEL pad for 3 seconds.
Start/Cancel Button
When cycle and options are selected, LEDs of selected cycle and options are illuminated. The status window displays the cycle time.
To start the cycle, press START/CANCEL pad and close the dishwasher door immediately.
You can cancel a cycle anytime during the cycle. Press and hold the START/CANCEL pad for 3 seconds. The light beside the cycle and option selected will go out, the START/CANCEL light will remain illuminated, the dishwasher will start a 90 second drain. At the end of the drain, select the next desired cycle.
Status indicator Lights
When the Sanitize option is selected, the Sanitized light will glow when the Sanitize cycle is finished. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. The light will remain on until the door is opened.
The Clean light will come on at the end of cycle and remain on until the door is opened.

OPERATING INSTRUCTIONS

Getting Started

Load Dishwasher (See Dish Preparation).
Add detergent (See Filing the Detergent Dispenser).
Add Rinse Aid, if needed (See Rinse Aid).
Select desired Cycle (See Cycle and Option Chart). The cycle indicator light will glow when selected.
Select desired Option (See Cycle and Option Chart). The indicator light beside the option will glow when selected.
Run hot water faucet nearest dishwasher until water is hot. Turn water off.
To start, press START/CANCEL pad.
Close door to latch.

NOTE
If the dishwasher door is opened while the unit is running, the START/CANCEL pad must be pressed and the door shut immediately to return the unit to the selected cycle and option, this must happen within 10 minutes for the unit to continue the cycle.

Opening the door during cycle

If you open the door while a cycle is running or delay is counting down, the dishwasher will stop running.
The LEDs of selected cycle and options are illuminated, the status window displays the remaining cycle time. The LED above START pad will blink to press start.
To resume, press START pad and close the dishwasher door immediately.
The status window displays ‘Close’ after the START pad is pressed.
A tone will sound indicating that the dishwasher will begin running from the point of interruption after the door is closed.
If the dishwasher door is kept open for too long, or the door is closed without pressing START pad, the running cycle or delay countdown will be canceled.

Child Lock Controls

To prevent children from accidentally changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and holding the Temp pad for 3 seconds while the door is latched. An indicator light on the lock graphic pad will illuminate when the controls are locked and no new selections can be made until the lock is released. To unlock the controls, press the Temp pad, again for 3 seconds until the indicator light goes out. $FRIGIDAIRE-A23549801-Dishwasher-fig- $3$$
- Select the Normal and High Temp options along with a Rinse Aid agent for improved drying performance.

Cycle and Option Chart

Cycle and intended use| Selectable Options Temperature; Drying| Water per Cycle (approx.)| Duration (approx.)
---|---|---|---
Heavy Wash
Recommended for pots, pans, casseroles and dinnerware having light to heavily soiled loads.| Sanitize, Max Dry, Heat Dry| 6 – 8.2 gal. 23 – 31 L.| 2.5 – 3.75 Hours
Normal Wash
Recommended for lightly to heavily soiled loads.| Sanitize, High Temp*, Max Dry, Heat Dry| 2.9 – 6.7 gal.

11 – 25 L.

*Does not include drying time.

Dish Preparation

Scrape away large pieces of food, bones, pits, toothpicks, etc.
The continuously filtered wash fluid will remove remaining food particles. Burned-on foods should be loosened before loading. Empty liquids from glasses and cups.
Foods such as mustard, mayonnaise, vinegar, lemon juice and tomato based products may cause discoloration of stainless steel and plastics if allowed to sit for a long period of time. Unless the dishwasher is to be operated at once, it is best to pre-rinse or use the rinse only cycle to rinse off these food soils.
Load racks so that large items do not prevent the detergent dispenser from opening.
Check manufacturer’s recommendations before washing items in question.
If the dishwasher drains into a
Food Disposer, be sure disposer is completely empty before starting dishwasher.

Loading the Top Rack

Features and appearance of racks and silverware basket may vary from your model.
The upper rack is designed for flexibility in loading a wide variety of items including cups, glasses, stemware, small plates, bowls, etc.
Load glasses in top rack only. Damage may occur if placed in bottom rack.
Load plastic items in top rack only. Melting may occur if placed in bottom rack.
Load items with open ends facing down for better cleaning and draining.
Damage may occur if delicate items touch each other during dishwasher operation.
Long-handled knives and utensils can be placed in top rack.
Be sure nothing protrudes through the bottom of the rack to block rotation of middle spray arm. $FRIGIDAIRE-A23549801-Dishwasher-fig- $5$$
Some models have a fold-down cup shelf or a cup shelf/stemware holder. They can be used to load two levels of cups, juice glasses, and other short items. Stagger items on upper level so that water can reach all inside surfaces. Fold up to load tall glasses.

Upper Rack
The upper rack can be used to wash a wide assortment of items when you don’t have a full load.

NOTE
Stemware holder/cup shelf not available on all models. Place the clips of the cup shelf over the horizontal rack wires and push down to attach the cup shelf onto the second wire of the upper rack.

Loading the Bottom Rack

Features and appearance of racks and silverware basket may vary from your model.
The lower rack is best for plates, saucers, bowls, and cookware. Large items should be placed along the edge so they do not block the spray arm rotation. For best results, place bowls, casseroles, and sauce pans with soiled surface facing down or toward the center. Tilt slightly for better drainage.
Make sure tall items do not block spray arm rotation.
Be sure pan handles do not protrude through the bottom of the rack and block the spray arm rotation.

Loading the Silverware Basket

CAUTION
Load sharp items (knives, skewers, etc.) pointing down.
Failure to do so may result in injury.

Features and appearance of racks and silverware basket may vary from your model.
Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table.
Use suggested loading patterns, as shown, to increase washability of the silverware.
Be sure nothing protrudes through bottom of basket or rack to block the spray arm.
Do not mix silver and stainless to avoid damaging the silver finish.
When covers are up, mix items in each section of the basket with some pointing up and some down to avoid nesting. Water spray cannot reach nested items.

Adding a Dish
To add or remove items after wash cycle starts:

Unlatch door and wait a few seconds until wash action stops before opening.
Add the item and wait a few seconds to allow cold air to slowly expand inside dishwasher.
Close door firmly to latch and press the START/CANCEL pad to resume.

CAUTION
The use of industrial grade detergent can damage the heating coil and other parts of the dishwasher leading to damage to the unit and surrounding property. Use only household grade automatic dishwasher detergents.

Filling the Detergent Dispenser
The detergent dispenser has two detergent cups. The smaller one is for addition to the pre-wash and the larger is for release to the main wash.

Use only fresh automatic dishwashing detergent. Other detergents may cause overusing.
When using automatic dishwashing detergent tabs, place one tab in main wash cup and close.
Add detergent just before starting cycle.
Store detergent in a cool, dry location. Moist or caked detergent may not dissolve properly.
If the cover is closed on the Main Wash Cup open by pressing the Cover Latch.

How much Detergent to use
The amount of detergent to use depends on the water hardness. Water hardness is measured in grains per gallon. Using too little detergent can result in poor cleaning and hard water filming or spotting. Using too much detergent in soft water can cause etching to some glassware which is surface damage that appears like a film but cannot be wiped off. Your local water company, water softener company or county extension agent can tell you the water hardness in your area.

Detergent Usage Chart

(each cup: fill to line above “Regular”)

| 8 teaspoons (each cup: completely full)| Each Cup: Completely Full (water softener recommended)
1 Hr. Wash or Energy Saver| 2 teaspoons (Main Wash cup-1/4 full)| 5 teaspoons

(each cup: fill to line above “Regular”)

| 8 teaspoons

(Main Wash cup: completely full)

| Main Wash Cup: Completely Full (water softener recommended)

As a rule, use 1 teaspoon for each grain above 12. For very hard water, detergent alone may not be enough and then a water softener is recommended to improve water quality and dishwashing performance.

Rinse Aid

Rinse aid greatly improves drying, reduces water spots, filming, and lubricates wash arm bearing for proper rotation. With it water “sheets” off dishes rather than forming water droplets that cling and leave spots.
A dispenser, located next to the detergent cup, automatically releases a measured amount of rinse aid during the last
rinse. If spotting and poor drying are problems, increase the amount of rinse aid dispensed by rotating the dial to a higher number. The dial is located under the dispenser cap. The indicator will be dark when full and will show clear when it is time to refill.
To add liquid rinse aid, turn dispense cap 1/4 turn counterclockwise and lift out. Pour in rinse aid until liquid touches the indicated fill level Replace cap.
Do not overfill since this can cause oversudsing. Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes, depending on setting.
The HEAT DRY option in combination with rinse aid will enhance drying performance. The energy required to use the HEAT DRY option costs pennies per cycle. You may choose not to select the HEAT DRY option; however you will have items in your dish load that will not be completely dry at the end of the cycle.

Water Pressure

The hot water line to dishwasher must provide water pressure between 20 and 120 psi.
Low Water pressure may occur when laundry or showers are in operation. If you experience poor wash performance you may need to wait until water use is reduced before starting dishwasher.

Water Temperature
Hot water is needed for best dishwashing and drying results. Water entering dishwasher should be at least 120oF (49oC) to give satisfactory results.

To check water temperature entering dishwasher:

Turn on hot water faucet nearest dishwasher for several minutes to clear cool water from pipes.
Hold a candy or meat thermometer in the water stream to check the temperature.
If temperature is below 120oF (49oC), have a qualified person raise the hot water heater thermostat setting.

IMPORTANT
Before starting a cycle, run hot water to clear cool water from pipe. $FRIGIDAIRE-A23549801-Dishwasher-fig- $13$$

Select the Normal Wash and High Temp pads along with a Rinse Aid agent for improved drying performance.

CARE AND CLEANING

To empty the glass trap:

Pull the glass trap handle up and out toward you to remove.
Empty any debris collected in the glass trap.
Once empty, slide the glass trap back into the same location as when removed, then push down to lock back into position. See image above.

NOTE
Hard water may cause lime deposit buildup on the interior of the dishwasher. For cleaning instructions see “Removing Spots and film” section.

WARNING

Burn Hazard
- Allow heating element to cool before cleaning the interior.
- Failure to do so can result in burns.

Outer Door – Clean outer door with warm soapy water and a dishcloth or sponge. Rinse with clean water and a dry cloth. Do not use harsh cleaners.
Inside – The inside of the dishwasher and filter are self-cleaning with normal use. If needed, clean around the tub gasket area with a damp cloth. The filter is self-cleaning. A glass trap located in the center of the filter is designed to collect pieces of broken glass, straws, bones and pits.

Overfill Protector- keeps dishwasher from overfilling and is located in the left front corner of the tub.
- Clean occasionally with household cleaner containing vinegar or bleach to dissolve any buildup.
- Overfill Protector should move up and down freely about one inch.
If it does not move, lift and clean underneath.

Cleaning the Interior
Use Frigidaire ReadyClean® Dishwasher Cleaner Tablets (Item # 10FFPRDT01) to clean and freshen the interior of
the dishwasher. Place one tablet in the bottom of the empty dishwasher tub (not the dispenser), run a rinse cycle, leave washer door closed for at least 6 hours, then resume normal use. One tablet used monthly is recommended for best results.

Care of Drain Air Gap
If a drain air gap was installed for your built-in dishwasher, check to make sure it is clean so the dishwasher will drain properly. A drain air gap is usually mounted on countertop and can be inspected by removing the cover. This is not part of your dishwasher and is not covered by warranty.

Winterizing
A dishwasher left in an unheated place should be protected from freezing. Have a qualified person do the following:

To Disconnect Service:

Turn off electrical power to the dishwasher at the supply source by removing fuses or tripping circuit breaker.
Shut off water supply.
Place a pan under the inlet valve. Disconnect water line from inlet valve and drain into pan.
Disconnect drain line from pump and drain water into pan.

To Restore Service:

Reconnect the water, drain, and electrical power supply.
Turn on water and electrical power supply
Fill both detergent cups and run dishwasher through a HEAVY WASH cycle.
Check connections to make sure they do not leak.

NOTE
See Installation Instructions for more details on disconnecting and restoring service to your dishwasher.

TROUBLESHOOTING

Before You Call:
Before calling for service, review this list. It may save you both time and expense. This list includes common experiences that are not the result of defective workmanship or material in your dishwasher.

Food Soils Left on Dishes

Choose another cycle for longer washing time.
Check rack loading section for proper loading-avoid nesting items.
Do not overload the dishwasher (See Preparing and Loading Dishes).
Check to verify that the glass trap is maintained and installed properly (See Care and Cleaning).Home water pressure may be too low-should be 20 to 120 pounds per square inch (psi).
Check incoming water temperature. It should be about 120oF (49oC). (See Factors Affection Performance).
Check water hardness. For extremely hard water, it may be necessary to install a water softener. (See Detergent Chart).
Use Fresh Detergent.
Make sure items are not blocking the spray arms, preventing them from rotating.

Dishes not Dry

If you have not selected Max or Heat Dry, and no LEDs are illuminated for these Options, then the heater has been de-activated during the drying phase of the selected Wash Cycle. This is known as Air Dry. Air Dry slightly lowers the energy usage but increases the likelihood that the dishware will not be completely dried.
Selecting Heat Dry, High Temp or Sanitize Temp options will improve drying performance.
Make sure the rinse aid dispenser is filled.
Increase the discharge setting of rinse aid. (See Rinse Aid).
Check the incoming water temperature. Be sure it is at least 120oF (49oC).
Check for proper loading-avoid nesting items.
Plastic items may need to be towel dried.
Cups with a concave bottom will collect water. Load them at the far left of the upper rack so they will be held in a tilted position.
Containers, bowls, pots/pans, and any dishware with concave surfaces that can collect water should be placed in the rack facing or angled down so that water is able to drain even from the lowest point.

Drying Tip
Select the Normal Wash and High Temp pads along with a Rinse Aid agent for improved drying performance.

Glassware/Flatware Spotted or Cloudy

Check water hardness. For extremely hard water, it may be necessary to install a water softener. (See Detergent Chart).
Water temperature may be low. Avoid extremely low or high temperatures. (See Factors Affecting Performance).
Avoid overloading and improper loading. (See Preparing and Loading Dishes).
Use fresh detergent. Old detergent is ineffective.
Make sure rinse aid dispenser is filled.
Check to see that proper amount of detergent is being used for cycle selected. (See Detergent Dispenser).
Home water pressure may be too low-it should be 20 to 120 pounds per square inch (psi).

Dishware Chipped

Load with care and do not overload.(See Preparing and Loading Dishes).
Place delicate items in top rack.
Place glasses securely against pins and not over pins.
Load items so they are secure and don’t jar loose when moving racks in and out. Move racks in and out slowly.
Make sure tall glasses and stemware will clear top of tub when rack is pushed in.
Fine antique china and crystal should be hand-washed.

Dishware Stained or Discolored

Tea and coffee can stain cups. Remove the stains by hand washing in a solution of 1/2 cup (120 ml) bleach and one quart (1L) of warm water. Rinse thoroughly.
Iron deposits in water can cause a yellow or brown film. A special filter installed in the water supply line will correct this problem. (See Removing Spots and Film).
Aluminum utensils can leave gray/black marks when they rub against other items. Load Properly.
Certain high acid foods can cause discoloration of stainless steel and plastics if allowed to sit for a long period. Rinse by hand if not operating dishwasher at once.
Mixing stainless steel and silver utensils in silverware basket can cause pitting of the stainless steel blades. Avoid mixing stainless steel and silver.

Etching

Using too much detergent especially in soft or softened water causes damage that looks like a film but cannot be removed.
Adjust the amount of detergent based on the water hardness. (Check Detergent Chart).
Lower the water temperature by selecting the Normal Cycle.

Dishwasher Won’t Fill

Assure the water supply is turned on.
Check that the overfill protector moves up and down freely. (See Overfill Protector section).

Detergent Left in Cups

Detergent may be old. Discard and use fresh detergent.
Be sure the dish load doesn’t spray from entering the detergent cup.
Check to see if cycle has been completed.
Make sure items do not prevent the detergent dispenser from opening.

Vapor at Vent

Water vapor escapes from the vent during the drying part of cycle. This is normal.
Spilled rinse aid can cause foam and lead to overflowing. Wipe up any spills with a damp cloth.
Check to see that dishwasher is level.(See Installation Instructions).

Normal Sounds You Will Hear

Normal sounds include water fill, water circulation and motor sounds.
There is a noticeable change in sound when the wash action switches between the lower and middle spray arm. This is normal since each spray arm has it’s own sound.
It is normal for the dishwasher to pause (no sound) when the wash action is switching between the lower and middle spray arms.

Water in Bottom of Tub
Water left in the tub bottom after the cycle is complete is not normal. If water remains in the bottom of the tub, the dishwasher may not be draining properly. (See Dishwasher Does not Drain Properly).

Dishwasher Leaks

Check that the door gasket is pressed into its mounting channel, reaches to the bottom of the tub and does not extend beyond the end rib so as to interfere with door closure.
Spilled rinse aide can cause foam and lead to overflowing. Wipe up any spills with a damp cloth.
Check to see that the dishwasher is level. (See Installation Instructions).
Avoid oversudsing by using the correct amount of detergent designed for automatic dishwashers.

Dishwasher Won’t Run

Check to see if circuit breaker is tripped or if a fuse is blown.
Make sure water supply is turned on.
Check to see if cycle is set correctly.(See Operating Instructions).
Is dishwasher set for Delay Start Option?
Make sure door is closed and latched.
Make sure START/CANCEL pad is pressed after the cycle has been selected.

Dishwasher Does Not Drain Properly

If unit is hooked up to a food waste disposer, make sure the disposer is empty.
Assure the knockout plug has been removed from inside the food waste disposer inlet.
Assure the drain hose isn’t kinked.
Make sure cycle is complete, not in a pause.
Assure the glass trap is maintained and installed properly assuring no clogs (See Care and Cleaning).

Cycle Takes a Long Time

The cycle may have been automatically lengthened to reach key temperatures due to some factor such as a cool water supply or a large load of dishes.
Delay Start option may have been selected.
Choose lower temperature options to shorten the cycle.
Cycles that are soil-sensing adjust automatically to assure a good wash- heavier soils will elicit a longer cycle response.

Dishwasher has an Odor

Soiled dishes left in dishwasher too long can create an odor.
There will be a “new” smell when first installed. This is normal.
Check to see if unit is draining properly. (See Dishwasher Does Not Drain Properly).

Stains on Tub Interior
Washing large amounts of dishware with tomato based soil can cause a pink/orange appearance. This will not affect performance and will gradually fade over time. Pre-rinsing will reduce the chance of staining. Using no heat dry option will lessen staining.

Opening the door during cycle
If the dishwasher door is opened while the unit is running, the START/CANCEL pad must be pressed and the door shut immediately to return the unit to the selected cycle and option, this must happen within 10 minutes for the unit to continue the cycle.

Removing Spots and Film
Hard water can cause lime deposit buildup on the interior of the dishwasher. Dishes and glasses may also get spots and film for a number of reasons. (See Glassware/Flatware Spotted or Cloudy section). To remove buildup, and film, clean using the following instructions:

Load clean dishes and glasses in normal manner. Do not load any metal utensils or silverware.
Do not add detergent.
Select the Normal Wash cycle. Close and latch door. Press START/CANCEL pad.
Allow dishwasher to run until it starts the second water fill (approximately 10 minutes).
Unlatch and open door and pour 2 cups of white vinegar into the bottom of dishwasher.
Close and latch door and allow cycle to finish.

LIMITED WARRANTY

Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions. The stainless tub and door liner of your appliance are covered by a lifetime limited warranty. During the lifetime of the appliance, Electrolux will provide a replacement stainless tub or door liner that fails to contain water due to a defect in materials or workmanship if the appliance is installed, used, and maintained in accordance with the provided instructions. In addition, the dishwasher racks and the electronic control module of your appliance are covered by a two through five year limited warranty. During the 2nd through 5th years from your original date of purchase, Electrolux will provide a replacement dishwasher rack or electronic control module for your appliance which has proven to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.

Exclusions:
This Warranty does not cover the following:

Products with original serial numbers that have been removed, altered or cannot be readily determined.
Product that has been transferred from its original owner to another party or removed outside the USA or Canada.
Rust on the interior or exterior of the unit.
Products purchased “as-is” are not covered by this warranty.
Food loss due to any refrigerator or freezer failures.
Products used in commercial setting.
Service Calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.
Service Calls to correct the installation of your appliance or to instruct you how to use your appliance.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not part of the appliance when it is shipped from the factory.
Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.
Labor or in-home service costs during the additional limited warranty periods beyond the first year from your original date of purchase.
Pickup and delivery costs; your appliance is designed to be repaired in the home.
Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
Damages to the finish of appliance or home incurred during transportation or installation, including but not limited to floors, cabinets, walls, etc.
Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need Service

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the address or phone numbers below.
This warranty only applies in the USA, Puerto Rico and Canada. In the USA and Puerto Rico, your appliance is warranted by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

USA
1-800-374-4432 Frigidaire
10200 David Taylor Drive Charlotte, NC 28262

Canada
1.800.265.8352
Electrolux Canada Corp. 5855 Terry Fox Way Mississauga, Ontario, Canada L5V 3E4
welcome home.

Our home is your home. Visit us if you need help with any of these things:

Frigidaire.com
1-800-374-4432
Frigidaire.ca
1-800-265-8352