DOKE BV6200 6.56 Inch 13000mAh Loud Speaker Ruggedized 4G Cellphone User Manual

DOKE BV6200 6.56 Inch 13000mAh Loud Speaker Ruggedized 4G Cellphone

Product Information

Specifications:

• Compliance: FCC Part 15
• Interference Handling: Accepts interference to prevent undesired operation
• Antenna: The receiving antenna can be reoriented or relocated
• Power: Should be connected to an outlet on a separate circuit from the receiver

Product Usage Instructions

Installation:

1. Ensure the device is placed in a location with adequate ventilation.
2. Connect the device to a power outlet on a circuit different from the receiver’s.
3. If using an external antenna, position it for optimal reception.

Operation:

1. Power on the device using the designated button.
2. Adjust settings as per your requirements using the control panel.
3. If experiencing interference, consider reorienting the antenna or increasing separation from other equipment.

Maintenance:

1. Regularly clean the device with a soft, dry cloth to prevent dust buildup.
2. Avoid exposing the device to extreme temperatures or humidity.
3. Refer to the user manual for troubleshooting steps in case of any issues.

FAQ

• Q: What should I do if I encounter interference while using the device?
  A: If interference occurs, try reorienting the receiving antenna, increasing separation from other equipment, or connecting the device to a different power outlet on a separate circuit. If issues persist, consult the dealer or a professional technician for assistance.

• Q: How do I know if the device is FCC-compliant?
  A: The device complies with FCC Part 15 regulations, ensuring that it meets the necessary standards for electromagnetic interference. You can refer to the product specifications or contact the manufacturer for further confirmation.

OVERVIEW

How to insert the card

To make sure your smartphone be able to call, put the SIM card in the following order.

1. Open the SIM card plug.
2. Press the card pin into the side hole and then the card tray pops up and pull out it.
   • Take out the card slot and place the Nano card or TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
   • With the phone facing up, insert the cardholder into the phone in the direction of the arrow.

How to boot
Non-removable battery
Press the power button for 3-5 seconds to boot.

How to send SMS, MMS

• SMS
  • Open the SMS app
  • Select New Information
  • Enter a phone number or browse your contacts
  • Select Edit Information and enter your text
  • Send
• MMS – video
  • When writing a text message
  • Select images, videos or other files you want to add, even You can take a new picture or video right away.
  • Selecting or sending
• Language switching settings
  • Main menu-settings-system setting-language and input method
  • Language and input method language adding
  • Select the language you need, the system will automatically jump back to the language interface
  • Select the icon after the language bar and drag it to the first one.

SAR

• The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg.
• In line with the requirements of the national standard GB 21288-2007.

Tri-proof device performance test the dustproof and waterproof level of this product has been certified as IP68

• When doing the waterproof test, the water depth is within 1.5 meters, and the mobile phone is immersed in water within 30 minutes;
• Anti-drop test: Height within 1m, and phone is falling itself.
• Pressure test: Keep the ground flat and do not bear pressure at a single point.

Safety

To ensure safely using the product, you must strictly abide by the following rules:

• The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
• If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
• Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
• Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
• Although the equipment is durable, it is not indestructible. We still recommend avoiding knocking, throwing, crushing, perforating or bending this device.
• If you want to read the full CE compliance, please check this link: http://www.blackview.hk/ce/.

Maintenance

• Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and extend the service life of the mobile phone as much as possible.
• Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
• If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, the mobile phone will be forced to restart (unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information- SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each phone are performed in positions and locations as required by the FCC. For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non- compliance with the above restrictions may result in violation of RF exposure guideline.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>