DOKE POWERMAX3600 Portable Power Station User Manual
- June 16, 2024
- DOKE
Table of Contents
DOKE POWERMAX3600 Portable Power Station
Packing List
FCC ID: 2A98M-POWERMAX3600
Product Description
- LED lights
- LED on/off
- LCD
- AC output 120V
- AC power button
- DC output power button Anderson output port 378W Main power button
- Cigarette Lighter Port 120W
- IFI/Bluetooth pairing button
- USB-C 100W output port 2
- USB-A*l 12W, scalable
- USB-A 18W fast charging output port*3
- USB output power button
- DC5521 output port*2
- Solar/Car charging input port
- AC charging input port 1800W
- AC input overload protector
- AC charge speed switch
- Power Pack Connection lnterface*2 3.6kwh
LCD
Power On/Off
Power Pack Connection Charging
Three different connection methods can increase battery capacity
Charging Your Devices
Charging PowerMax 3600
Specifications
Safety Instructions
- Do not use the product near a heat source, such as a fire source or a heating furnace.
- Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the product in rainy or humid environments.
- Do not use the product in an environment with strong static electricity/magnetic fields.
- Do not disassemble the product in any way or pierce the product with sharp objects.
- Avoid using wires or other metal objects that may result in a short circuit.
- Do not use unofficial components or accessories. If you need to replace any components or accessories, please visit official channels to check relevant information.
- When using the product, please strictly follow the operating environment temperature specified in this user manual.
- If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
- Do not stack any heavy objects on the product.
- Do not lock the fan forcibly during use.
- Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact, turn off the power supply immediately and stop using the product.
- Ensure the product is well fastened during transportation to avoid vibrations and impacts.
- If you accidentally drop the product into water during use, please place it in a safe open area, and stay away from it until it is completely dry.
- The dried product should not be used again and should be properly disposed of according to the section “Disposal Guide” below.
- If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
- Use a dry cloth to clean off dirt on the product ports.
- Rest the product on a flat surface to avoid damages caused by the product falling over.
- If the product is overturned and severely damaged, turn it immediately, place the battery in an open area, and keep it away from combustible matter and people, and dispose of it per local laws and regulations.
- Ensure that the product is kept out of reach of children and pets.
- Store the product in a dry and ventilated place.
- It is recommended to use moisture barrier bags in wet environments (for example, places by the sea or waterways) to prevent the product /room from getting soaked.
- If water is found inside the product, it must not be used or turned on again. Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof and open area.
- Once complete contact CustomerService immediately.
- This product is not recommended for powering medical emergency equipment related to personal safety, including but not limited to medical grade ventilators (hospital version CPAP: Continuous Positive Airway Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your doctor’s instructions and consult with the manufacturer for restrictions on the use of the equipment.
- If used for general medical equipment, please be sure to monitor the power status to ensure that the power does not run out.
- When in use, power supply products will generate electromagnetic fields, which are likely to affect the normal operation of medical implants or personal medical equipment such as pacemakers, cochlear implants, hearing aids, defibrillators etc.
- If these types of medical equipment are being used, please contact the manufacturer to inquire about any restrictions on the use of such equipment.
- These measures are fundamental to ensure a safe distance between the medical implants (for example, pacemakers, cochlear implants, hearing aids, defibrillators etc.) and this product while in use.
- When the power supply is connected in normal mode to a refrigerator, power fluctuations may cause the power supply to automatically shut down. When connecting the power supply to a refrigerator that stores medicine, vaccines or other valuable items, it is recommended to set the AC output to “Always on” in the app. This helps support a continuous power supply and ensures a safe and efficient power consumption state.
Guide
- If conditions permit, make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin.
- The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
- If the battery cannot be fully discharged due to a product failure, please do not dispose of the battery directly in the battery recycling box.
- In such a case, you should contact a professional battery recycling company for further processing.
- Please dispose of over-discharged batteries that cannot be recharged.
Error code and handling
| OTC | Exception | Abnormal recovery method |
|---|---|---|
| 001 | Over Voltage Protection | Stop charging and let stand for a eriod of |
time,
or automatically restore after disc arge
002| Low Vo ltage Protection| Recovery after
charging with mains po w er
003| ****
Discharge current overload
| Remove abnorma l load and automatically
recover after normal lo ad
004| Charging current overload| Automatic recovery after
disconnecting charging
005| Short circuit protection| Please contact after-sa
le s
006| Battery co lle ction disconnection| Please
contact after-sales
007| Low temperature of battery charging| The battery temperature
recovers automatically after it returns above O’C
008| Battery charging high temperature| The battery recovers
automatically after cooling down
009| Battery discharge low temperature| Th e
battery automatically recovers when
the temperature is higher than -2 0 ° C
010| Battery discharge high temperature| The battery recovers
automatically after cooling down
013| The total battery voltage is too high| Automatic recovery
alter stopping charging
014| The total battery voltage is too low| Automatic recovery
after charg in g
015| MPPT failure| Please contact after-sa le s
016| Prohibit photovoltaic charging| The s(cstem
automatically recovers after a period
of de ay
018| Battery failure| ****
Automatic recovery after discharge
| |
UPS
The product supports UPS. When you connect the grid power to the AC Input Port
of the product through an AC cable, you can power electrical devices through
the AC Output Port (AC power will come from the grid and not the power station
in this situation). In case of a sudden blackout, the product can
automatically switch to the battery-powered supply mode within 10ms. As a
basic UPS function, this function does not support Oms switching. Please do
not connect the product to any device that requires Oms UPS, such as data
servers and workstations. Please test and confirm the compatibility before
using the product. We recommend that you only charge one device at a time and
avoid using multiple ones at the same time to avoid overload protection. OSCAL
takes no responsibility for any device failures or data losses caused by
failures to follow instructions.
APP Connection
- Download the Smart Life APP
- Download Method 1
- Go to the App Store and
- Android app store search
- Download and install “Smart Life”
- Select the appropriate version according to the country register and log in to the Smart Life app
- Turn on the Bluetooth button and press it for more than 5 seconds to initialize the Bluetooth
- Click APP to add a device.
Disclaimer
Before use, please read the user manual of this product to ensure that it is used correctly after full understanding. After reading, please keep the user manual safe for future reference. If this product is not handled correctly, you may cause serious injury to yourself or others, or cause product damage and property damage. Once you use this product, you are deemed to have understood, recognized and accepted all the terms and contents of this document.
The user undertakes to be responsible for his actions and all consequences arising therefrom. The company shall not be liable for all losses caused by the user’s failure to use the product by the “User Manual”. By laws and regulations, the company reserves the right to make the final interpretation of this document and all documents related to this product. This document is subject to change (update, amendment or termination) without notice. Please visit the OSCAL official website for the latest product information.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>