legrand 412173 Connected Dry Contact Instruction Manual

: June 2, 2024
: Legrand

Table of Contents

egrand 412173 Connected Dry Contact Instruction Manual
12173 DRIVIA Connected Dry-Contact Contactor
Composition
Imperative security precaution
Use by manual control and status LED
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)
Add the in a connected installation

egrand 412173 Connected Dry Contact Instruction Manual

12173 DRIVIA Connected Dry-Contact Contactor

Requires the installation of a

Composition

CE Directive , Compliant with the following European directive:
Low voltage directive (LVD) 2014/35/UE Electromagnetic compatibility (CEM) n° 2014/30/UE

Imperative security precaution

The instructions for installation and use must be strictly observed in order to avoid the risk of electric shock or ﬁre.

Preparation, connection

Wiring examples
Control of any type of device from 12 to 30V DC via their terminal block provided for this purpose. For example: air conditioner, heating manager…
For the protection of the installation, it is recommended to use a circuit breaker or a gG fuse with a rated current suitable for the section of the cables.
Wiring examples (following)

Control of single phase power contactor (example : swimming pool pump…)
For the protection of the Dry-contact and the command circuit (terminal 1 and 2), it is mandatory to use a MCB or a gG fuse of rated current 2A.
Control of charging station for electric vehicles

For the protection of the installation, it is recommended to use a circuit breaker or a gG fuse with a rated current suitable for the section of the cables.

Add the in a connected installation

In order to restart all connected products at the same time.
**: After wiring the installation, reﬁt the front plate so that no active live part is accessible.
1. Finalize the installation Legrand Home+ Control smartphone app
  Download Home+ Control smartphone app and follow the instructions to add the connected product in your installation.
  You also have the possibility to remote-control your installation via a voice assistant and can customize your scenarios via the Home+Control app.

Use by manual control and status LED

Reset a Connected Dry-Contact
to remove it from a connected installation
Press the conﬁguration button of the Connected Dry-Contact (> 5 seconds) until the conﬁguration indicator lights up in ﬁxed red. It is no longer associated with the gateway present in the installation.

www.legrand.fr/reference/412173
LEGRAND – Pro and Consumer Service – BP 30076
87002 LIMOGES CEDEX FRANCE
www.legrand.com
UE SIMPLIFIED DECLARATION OF CONFORMITY
The undersigned, Legrand
declares that the radio equipment listed on this instruction sheet
are compliant to the directive 2014/53/UE.
The full text of the UE declaration of conformity
is available at the following website: www.legrandoc.com