Pyle PDICS82 Ceiling Wall Mount Speaker Installation Manual
- June 4, 2024
- Pyle
Table of Contents
** Pyle PDICS82 Ceiling Wall Mount Speaker
**
Specifications
- Product Dimensions: 8 x 11 x 4.8 inches
- Item Weight: 28 pounds
- Item model number: PDICS82
- Speaker Type: Woofer
- Connectivity Technology: Wired
- Recommended Uses For Product: Music
What’s in the box?
- Ceiling Wall Mount Speaker
Product Descriptions
Any room in your house or workplace will receive high-quality sound from the Pyle Pro PDICS82 two-way in-ceiling speaker system without taking up valuable floor space. The speaker is 6.5′ in diameter and has a 1.5′ tweeter cup and 1′ high temperature voice coil for a rich, full sound. These speakers have a maximum power output of 150 watts with a frequency response range of 60 Hz to 16 kHz.
SIMPLE INSTALLATION
The item includes an overall cut-out template with dimensions of 10.6″(W) x 10.6″(H) x 4.4″ for simple installation (D). The item also comes with the installation equipment for a perfect application.
Features
Pyle in-wall speaker systems were skillfully coupled to provide sound that was crystal clear and exceptionally responsive at a peak power of 150 WATTS. Its 89 dB can provide secure wide-range sound performance while also increasing the useful life of the product.
Speaker system with an 8″ woofer, SPL: 89 Db. 8 Ohm Impedance, 1.0″ High Temperature Voice Coil.
FAQs
Can speakers for TVs be mounted on the ceiling?****
You can play TV audio using ceiling speakers because TVs lack dedicated speaker outputs, but you cannot connect the speakers directly to one another.
How far should speakers be mounted from the ceiling?****
In-wall and ceiling speakers need to be at least 18 to 24 inches separated from one another.
Are ceiling speakers that mount to the wall possible?****
In-wall speakers can be replaced with in-ceiling speakers, and the sound they produce is very comparable. The size difference will be the most obvious. Typically, in-wall speakers are bigger than in-ceiling speakers.
Must speakers installed in ceilings be enclosed?****
Yes. Your in-ceiling speakers’ sound quality will suffer if a back box is not installed, which could lead to noise pollution in other parts of your house.
How do I play music through the speakers in my ceiling?****
Then, attach speaker wires to each amp-powered speaker after purchasing a multi-zone AV receiver. If you buy an AV receiver with Bluetooth and WiFi built in, setting up your home audio system will be simpler.
When is it okay to utilize ceiling speakers?****
Ceiling speakers can be used in one room or numerous. The background music at a huge gathering is one example of how they can be used to create sound that is easily transferable between various rooms. Those who enjoy entertaining will appreciate the adaptable, unobtrusive surround sound experience they offer both inside and outside.
How are ceiling speakers and televisions connected?****
You can listen to TV sound through your ceiling speaker system by running an analogue cable from your TV to the amplifier and switching to line output on your TV. 1) Gone from the majority of contemporary TVs is the 3.5 mm headphone jack.
Do the ceilings have decent speakers?****
In reality, playing music over ceiling speakers is a terrific idea. They can make you feel like you’re at a concert hall or live performance by completely enveloping you in surround sound.
Do my ceiling speakers need a subwoofer?****
Even if ceiling speakers can handle all of the frequencies, a subwoofer will be helpful in handling the bass and low-end ones. Additionally, it significantly improves the overall sound quality of your sound system.
Do my speakers require an amplifier?****
No amplifier is required. Lack of power is not an issue for you if the device you use to listen to music is capable of doing it on its own.
How can I connect my amp to the speakers in the ceiling?****
Make a path through which the wires can travel. After ensuring sure the amplifier is unplugged, turn the breaker off. Install the wiring. Start connecting the wires to the ceiling speaker terminals. The terminals of the amplifier should receive the other end of the cables. By enabling your breaker, you may test it out.
For each room, how many ceiling speakers are needed?****
Rooms larger than 3 x 3 metres and larger than 5 x 5 metres should use one ceiling speaker pair and two pairs, respectively, for a more equal sound.
Why aren’t the ceiling speakers working?****
The problem could be with the speakers themselves, the wiring, or the audio source. To test if the source is the issue, you might switch the connections at the source. For example, you could unhook a connection from a speaker that is working and attach it to the problematic speaker.
How is a ceiling-mounted speaker removed?****
Disengage any retention clips holding the speaker assembly to the ceiling mounting system using a flat-head screwdriver. Take your time and gently pry the speaker from the ceiling. Unplug the speaker’s audio cables from its back before entirely removing it from the ceiling.
How far from the wall should a ceiling speaker be placed?****
18 inches apart As far apart as speakers on a typical sound system would be, speakers should be placed at least 18 inches from the wall.