GAMEMAX 6675 Vista Micro ATX Cases User Manual
- June 1, 2024
- GAMEMAX
Table of Contents
GAMEMAX 6675 Vista Micro ATX Cases
Product Information
Specifications:
- Quantity A: 12
- Quantity B: 8
- Quantity C: 6
- Quantity D: 4
- Quantity E: 4
- Quantity F: 2
- Quantity G: 12
- Quantity H: 5
Product Usage Instructions
Installation Steps:
- Remove the side panels by following the instructions provided.
- Insert the PSU from the left side and secure it with screws.
- Insert the motherboard IO shield and place the motherboard in the corresponding position, securing it with screws.
- Remove the PCI-E bracket and install the GPU card.
- Install 2.5 SSD in the compatible position.
Fan and Cooling System:
The product supports various fan sizes for cooling purposes. Ensure to pay
attention to the airflow direction inside the chassis for optimal cooling
efficiency.
Component Compatibility:
The chassis is designed to accommodate different components such as HDDs,
SSDs, and various screws for assembly. Follow the provided quantities for each
component during installation.
Cable Management:
Use cable ties provided to manage and organize cables within the chassis
for a neat and efficient setup.
Frequently Asked Questions (FAQ):
-
Q: Can I install both HDDs and SSDs in this chassis?
A: Yes, the chassis supports both 3.5 HDDs and 2.5 SSDs. Follow the installation instructions for each type of drive. -
Q: What fan sizes are supported for cooling?
A: The chassis supports various fan sizes including 120mm and 140mm for different cooling locations. Refer to the specifications for detailed information. -
Q: How many PSU screws are included in the package?
A: There are a total of 6 PSU screws provided for securing the PSU in place.
Package Content
Connectors
I/O Panel
Exploded View
- Tempered glass front panel
- Tempered glass left side panel
- Right side panel
- Chassis
- HDD bracket
- Magnetic dust filter on top
- Dust filter at the bottom
- Magnetic dust filter on side
Installation Guide
- Remove the side panels.
- Insert PSU from left side, secure with screws.
- Insert the MB IO Shield, and then place the motherboard on the corresponding position and secure with screws.
- Remove the PCI-E bracket; Install the GPU card.
- 3.5″ HDD hard drive installation position is compatible with 2.5″ SSD.
- Install 2.5″ SSD.
- Fan Cooling System:
- Top: 3x120mm, 2x140mm(optional)
- M/B Cover: 2x120mm(optional)
- PSU Cover: 2x120mm(optional)
- Rear: 1x120mm(optional)
- Liquid Cooling System:
- Top: 120/140/240/280/360mm(optional)
- M/B Cover: 120/240mm(optional)
- Rear: 120mm(optional)
Airflow Direction
- Pay attention to the airflow direction inside the chassis.