Inox-bazis IPA67 Hand Sinks Instruction Manual
- June 2, 2024
- inox-bazis
Table of Contents
Inox-bazis IPA67 Hand Sinks
Product Information
Specifications
- Manufacturer: Inoxbazis
- Contact: +36 1 788-1828
- Website: www.inoxbazis.hu
- Product Type: Hand Sinks
Product Usage Instructions
Safety Regulations
Stepping or climbing on the devices is strictly prohibited as it could lead
to damage. Despite their sturdy appearance, the weight they can bear depends
on the gripping system. Watch out for burr plate ends that may cause cutting
damage.
Initial Setup
Before using the product, ensure it has been properly assembled and
installed according to the provided instructions. Remove any protective film
from the device before use.
Water Treatment Instructions
If the unit does not come with a factory faucet, refer to the water
treatment instructions for proper faucet use. Two types of taps are provided
by the manufacturer for different
applications.
Faucet Types
There are two types of faucets installed by the manufacturer. Make sure to
understand the specific usage of each type before operating the hand sink.
Cleaning Instructions
Follow the manufacturer’s cleaning instructions to maintain the hand sink
in optimal condition. Carefully clean any burr plate ends to prevent cutting
damage and ensure safe use.
FAQ
-
Q: Can I use any type of faucet with the hand sink?
A: No, it is recommended to use the faucets provided by the manufacturer to ensure proper functionality and compatibility. -
Q: How often should I clean the hand sink?
A: It is recommended to clean the hand sink regularly, depending on usage, to prevent any buildup of dirt or grime.
Dear Customer!
First of all, thank you for choosing us and honoring us with your trust!
We hope that you found everything in ideal condition and are satisfied with
the product!
Before using the product, make sure that it has been assembled and installed
in accordance with the instructions!
GENERAL DESCRIPTION:
The Italian IPA products are from a family-run stainless steel factory,
manufactured with the most modern metalworking machines, under conditions that
meet the requirements of the European Union. Thanks to this production
process, we can find solutions for the products that make the everyday use and
cleaning much easier. Such are the various sinks, hand wash basins, and
sprinkler rims produced by deep drawing. The products are made of stainless
steel KO33 (DIN1.4301). These are colloquially known as 18/10 steel. From our
previous experience, we know that in Hungary it is common to call this
material acid-resistant. ATTENTION! KO33 (also known as 18/10) stainless steel
is only slightly resistant to acids and alkalis! Do not use caustic cleaning
agents to clean this material, as they can seriously damage the surface.
SAFETY REGULATIONS:
Stepping, or climbing on the devices is strictly prohibited, because it could
damage or break them. Despite their robust appearance, their ability to carry
this kind of weight always depends on the particular gripping system. Despite
the greatest care during production it is possible for burr plate ends to
occur on the lower or inner parts of the units, that can cause cutting damage.
They dont mean a danger by functional use, but require care during cleaning.
USE
-
Before use, remove the protective folie from the device. In case you did not order the unit with a factory faucet, refer to the installed water treatment instructions for use of the faucet. Ipa products are equipped by the manufacturer with two types of taps. Different taps are installed for different types. Below you can see a brief description of the two faucets and their uses.
For products with the item numbers IPA30, IPA31 and IPA32: If you ordered the hand washer with a factory-fitted water tap, a knee lever was installed on your device with which you can handle the water. -
If there is separate hot and cold water on the wall outlet, a pre-mixing valve is connected in front of the knee lever. Cold and hot water are connected in this pre-mixer with flexible pipes. With the two black adjustment levers on the pre-mixer, you can individually regulate the water pressure and the desired temperature of the mixed water.
-
The knee lever opens and directs the water to any lateral movement as long as the knee lever is maintained in this inclined state. As soon as you release the knee lever, it returns to the starting position and the water stops. The knee lever mounts on the wall at such a height that the user can comfortably tilt it with their thigh. In this way you can use the hand cleaner completely hygienically without touching the device with your hands. The manufacturer produces the devices exclusively for the function of washing hands. All basins are bowl-shaped or curved, therefore cannot be used for other functions. IPA67,
-
IPA73, IPA74, IPA75, IPA76, IPA79, IPA80 These devices also have a factory pre-mixing valve, which can be used to regulate the water temperature, if there is a separate cold and hot water outlet for the device. In the case of wall-mounted devices, you can access the pre-mixing valve adjustment button from the bottom, while in the case of pedestal hand wash basins, you can access it from the lower cabinet. Cold and hot water are connected to the pre-mixing valve with flexible pipes. On the valve you will find a rotary knob, that indicates which direction you can set the mixing to be hotter or colder.
-
On the front cover of the hand washing device, you will find a large metal push button in a plastic frame. The push button can be operated with your knee so that you can use the device without manual contact. Press the button until it clicks, then release. The faucet provides water for approximately 6-12 seconds. The time also depends on the set water temperature, the colder the water, the longer it takes.
CLEANING
The wall-mounted and free-standing hand basins are made entirely of stainless
steel. They are also suitable for sprinkling or high-pressure washing. Be sure
to use only cleaning chemicals that are suitable for KO33 or stainless
materials. After cleaning, always wipe the surface dry with paper or a cloth
to prevent spots from forming when drying. Do not use a scrubbing brush or
sponge as this may damage the surface. Do not use aggressive degreasers. Do
not use granular creams as they may scratch the surface. Be sure to use the
appropriate protective equipment, read the guidelines for the chemicals you
want to use.
email: info@inoxbazis.hu
web: www.inoxbazis.hu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>