inox-bazis 9090 Stainless Sinks Basins and Coverplates Instruction Manual

: June 13, 2024
: inox-bazis

Table of Contents

inox-basis 9090 Stainless Sinks Basins and coverplates
Product Information
Product Usage Instructions
INSTRUCTIONS FOR USE AND CLEANING
INTRODUCTION
GENERAL DESCRIPTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

inox-basis 9090 Stainless Sinks Basins and coverplates

inox-b-azis-9090-Stainless-Sinks-Basins-and-Coverplates-
PRODUCT

Product Information

The product is a stainless sink, sink basin, and cover plate manufactured by Inoxbazis. It is made of KO33 stainless steel, which is only slightly resistant to acids and alkalis. The product has a 1-year guarantee and warranty obligation.

Product Usage Instructions

Before using the product, ensure that it has been assembled and installed according to the provided instructions.
Please read the user manual carefully before usage to avoid any damages or accidents. Improper handling of the product can reduce its lifespan and be dangerous.
Do not use caustic or chlorinated cleaning agents to clean the stainless steel material, as they can damage the surface. Use neutral detergents instead.
For the first use, check for any damages that may have occurred during transport. Remove the protective foil from the device. Wipe the product with a soft damp cloth using a neutral detergent to remove any dirt from manufacturing and shipping.
The manufacturer is not responsible for damages resulting from unprofessional, improper use, and improper cleaning. Such actions will terminate the warranty.
When you no longer need the product, ensure that it is properly recycled according to local waste management regulations.

Design and manufacture of stainless kitchen appliances 9090 Pannonhalma, Arany János u. Központi major, Hungary

INSTRUCTIONS FOR USE AND CLEANING

STAINLESS SINKS, SINK BASINS AND COVERPLATES

Dear Costumer!
First of all, thank you for choosing us and honoring us with your trust!We hope that you found everything in ideal condition and are satisfied with the product!

Before using the product, make sure that it has been assembled and installed in accordance with the instructions!

ATTENTION!

Always place the equipment on a flat, horizontal surface with adequate load capacity. You can achieve the horizontal position with the help of the adjustable legs.
It is forbidden to climb on the sinks, step on them, or place weights on them.
Be aware that some parts of the products may remain sharp despite the greatest care during production. Always be careful during transport and cleaning.
Do not use cleaning chemicals that are not suitable for stainless steel surfaces.
Improper use of chemicals damages the material, reduces its lifespan and can even cause corrosion.
Do not scratch the surface during use or cleaning. Do not use abrasive tools or chemicals.

CLEANING :

Cleanability: Limited chlorine-resistant surface (max 1%). All kinds of general cleaning agents can be used on the surfaces, but they must not contain phosphoric acid, and the maximum permissible concentration of some acidic or alkaline chemicals is: Benzalkonium chloride – Benzyl-C8-18-alkyl dimethyl ammonium chloride 2%, Alkyl-C10-16-dimethylamine oxide 3%, Coconut fatty acids-Potassium salts 2%, Alcohols-C16-18, ethoxylated 5%, Ethylenediamine tetraacetic acid tetrasodium salt 1%, Sodium C12-14-alkylsulfate, ethoxylated

INTRODUCTION

Please read the user manual carefully before usage. Improper handling of the product can cause damage, reduce the life span of the equipment, and can even be dangerous. The manufacturer is not responsible for damages resulting from improper use and improper cleaning with incorrect chemicals. The manufacturing company reserves the right to make technical changes which are necessary for development.

GENERAL DESCRIPTION

The sinks, basins and coverplates manufactured and distributed by Inox-Bázis Kft. are stainless steel products made with the most modern technology, the materials and production of which comply with the applicable regulations and standards, the relevant European Union standard and food hygiene trends. Thanks to their design, they are perfectly suited for use in large kitchens, facilitate everyday use and are easy to keep clean. Material of the products:

The adjustable leg : W.nr.1.4301/KO33
The work surface : W.nr.1.4301/KO33
The casing: W.nr.1.4016/KO3, 1-1.2 mm thick stainless steel.
Surface fineness: Scotch Brite, KORN: 320.

ATTENTION! KO33 stainless steel is only slightly resistant to acids and alkalis! Do not use caustic or chlorinated cleaning agents to clean this material, as they can damage the surface.

FIRST USE:

Before using the product, make sure that it is not damaged during transport.
Remove the protective foil from the device.
Wipe the product with a soft damp cloth using a neutral detergent to remove any dirt that may have been on it during manufacturing and shipping.

ATTENTION!

Do not use scrubbing tools or abrasive agents when cleaning.
Do not scratch the surface.
Do not use aggressive degreasers.
Only use cleaning products that are suitable for cleaning stainless steel.
After cleaning, always rinse and wipe the surface dry (with a cloth or paper) to prevent the formation of stains.
Be sure to use appropriate protective equipment during cleaning.
Always read the instructions on the chemicals you intend to use.

GUARANTEE

The manufacturer has a 1-year guarantee and warranty obligation. The manufacturer is not responsible for damages resulting from unprofessional, improper use and improper cleaning. The above will result in the termination of the warranty.

WASTE MANAGEMENT

The product is made of recyclable metal. Please protect the environment and when you are no longer using the product, ensure that it is properly recycled. You can find out about the relevant waste management regulations from the local authorities.

Inox-Bázis Kft. 9090 Pannonhalma, Arany János u. Központi major, Hungary