VEYFIY VE-HFL001 Floor Lamp Instruction Manual

VEYFIY VE-HFL001 Floor Lamp

Important Safety Instructions

Proper use

• This lamp is designed for illumination in dry indoor rooms. It is not suitable for use in damp rooms, e.g. bathrooms.
• Do not look directly into the light source! Your eyes could be damaged.
• The lamp must never be used for direct irradiation of persons, animals or plants.
• Do not touch the lampshade during operation, as it becomes very hot.
• Let the lamp cool down completely before changing the bulb or putting it away. Risk of burning.
• Be careful when inserting and changing the bulb. Risk of breakage and therefore risk of injury!
• Keep children away from packaging -risk of suffocation!
• Keep children away from the lamp, and do not leave them unsupervised with the lamp.
• Do not cover the lamp, for example with drapes or any-thing else. This could lead to fire.
• Wipe clean with a soft, dry cloth or static duster.Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish.
• This product contains glass parts ‒ be careful during handling and maintenance to avoid breakage.
• Always use the correct wattage and shape light bulbs according to the product label. Do not exceed the maximum wattages stated or this will overheat the product and may cause damage.
• This product is designed for private use and is not suitable for commercial purposes.

Risk of electric shock

• Keep the lamp away from humidity. Connect the lamp only to a wall socket, which corresponds to the technical data of the lamp.
• Do not use the lamp if it is damaged or if the connecting cable shows any kind of visible damage.
• Do not take the lamp apart and only have it repaired at your local electrical store.
• A damaged cable must only be repaired at your local electrical store.
• Before cleaning or if the lamp is not to be used for a long period, unplug the lamp from the mains power supply.
• During storms and before you change the bulb; unplug the lamp from the mains power supply.
• When removing the plug from the socket, always pull on the plug and not the cable.

Location

• Keep the lamp well away from heat sources such as stovetops or ovens.
• Place the lamp at least 8 inch from flammable materials.
• Always place the lamp on an even and stable surface to prevent it from tipping over.
• Do not allow the device to fall and do not subject it to strong impacts.
• Do not subject the device to extreme temperatures, severe changes in temperatures, direct sunlight or moisture.
• Prevent the floor lamp from falling water or getting wet.

Product Contents

Pre-assembly:

Before starting to assemble your portable luminaire, inspect each part for defects that may have occurred during shipping.

1. Inspect the wire insulation for any cuts, abrasions or exposed copper that may have resulted during shipping. If there is a defect in the wire, DO NOT continue the assembly opera-tion.
   Please contact the seller or the VEYFIY customer service.

2. If the glass “I shade” is broken or damaged, please DO NOT contin-ue to assemble the operation to avoid scratching your hands, please contact us as soon as possible. Note: Do not discard any con-tents before assembly is complete to avoid accidental loss of small parts or hardware.

Assembly Instructions

1. Connect the “E Rod” to the bottom “D Rod ” until it is screwed firmly.
2. Connect “C Rod” and “B Rod” bottom rods in sequence follow the first step. During this process, gently pull out the excess power cord from the bottom Rod.
3. Screw the “B rod” into “A Base” until it is secure.
4. Attach the “I shade” to the “F lamp head” and turn the “H Shade Ring” clockwise until it is tightened. Please pay attention to the direction of the lampshade when installing.
5. Install the prepared E26 bulb （Not included, need to be purch-ased separately）onto the “F Lamp Head”, and the installation is complete.

Turn the lamp on/ off

1. Put the power plug into wall socket and turn the switch on the Lamp head clockwise to turn on the light.
2. Turn the switch on the lamp head clockwise to turn off the light.

Changing bulb

Always grasp the base of the bulb when replacing the bulb, always handle the new bulb with a handkerchief or gloves to prevent damage to the bulb and a reduction in lifespan. Allow the bulb to cool completely before replacing it. Use only E26 model bulbs with a maximum power of 40 watts.

1. Unplug from the mains supply.
2. Carefully remove the old bulb from the installation.
3.  Carefully place the new bulb into the“F Lamp Head”.

Specification

Troubleshooting

Why does the bulb not light up?

1. Please check if the bulb is burned out or the bulb specification is not suitable, please replace the E26 bulb.
2. Please make sure the power cord is plugged in and the light switch is turned on.

NOTE: If you still can’t solve your problem, please contact our customer service.

Disposal

• The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection service.
• Dispose of the product in an environmentally friendly manner when you decide to part with it. This device should not be disposed of with household waste. Dispose of it at a recycling center for old electrical and electronic appliances.

Customer Service

12-month warranty period

Within one year from the date of purchase, we will repair or replace the product free of charge if it does not work properly due to the quality of the product itself. Any defects caused by improper use, damage, or attempts at repair by third parties are excluded from the warranty.
Contact Us
Mail : support@veyfiy.com
Website：www.veyfiy.com
Manufacturer:
Company Name： Shenzhen YaFex E-Commerce Co., LTD
Address： Floor 13A,Building11,Tianan Yungu phase Ⅱ,2018 xuegang Road,Bantian street,Shenzhen
Made in China

lmportant Safety Instructions

This portable lamp has a polarized plug ( one blade is wider than the other ) as a safety feature to reduce the risk of electric stock.This plug will fit in a polarized outlet only one way. If it does not fit, contact a qualified electrician.Never use with an extension cord unless the plug can be fully inserted.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>