Black Decker SM1000 6-Speed Stand Mixer with Stainless Steel Bowl User Guide

: June 5, 2024
: Black Decker

Black Decker SM1000 6-Speed Stand Mixer with Stainless Steel Bowl

SM1000 6-Speed Stand Mixer with Stainless Steel Bowl

Intended use

Your BLACK+DECKERTM SM1000 stand mixer has been designed for mixing, suitable food ingredients. This appliance is intended for indoor household use only.=

This appliance is not intended to be used in:

Staff kitchen areas in shops,Offices and other working environments;
Farm houses,
By clients in hotels, motels and other residential type environments;
Bed and breakfast type environments or any other non-household environments.

In order to avoid a hazard due to inadvertent resetting of the thermal cut- out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility

Safety instructions

Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury.
Read all of this manual carefully before using the appliance.
The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
Retain this manual for future reference.

Using your appliance

Always take care when using the appliance.
Misuse could cause injury.
Do not use the appliance outdoors.
Do not operate the appliance if your hands are wet. Do not operate the appliance if you are barefoot.
Guide the power supply cord neatly so it does not hang over the edge of a work top and cannot be caught accidentally or tripped over.
Keep loose clothing, hair, etc. away from moving parts.
Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.
If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.
Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use
Disconnect the appliance from the power supply when not in use and before changing accessories, cleaning, etc.
Do not immerse the appliance, cord set or plug in water or any other liquids.

Safety of others

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance..

After use

Switch off, remove the plug from the socket and let the appliance cool down before leaving it unattended and before changing, cleaning or inspecting any parts of the appliance.
When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced by an authorised repair agent.
Before use, check the power supply cord for signs of damage, ageing and wear.
Do not use the appliance if the power supply cord or mains plug is damaged or defective.
If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
Before use, check the power supply cord for signs of damage, ageing and wear.
Do not use the appliance if the power supply cord or mains plug is damaged or defective.
If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
Never attempt to remove or replace any parts other than those specified in this manual.

Additional safety instructions for Food Mixers

Warning! Do not place near a hot Gas or electric oven.

Do not Immerse Mixer, Base, Cord or Plug in any liquid.
Allow all moving parts of the appliance to come to a stop before approaching.
Always use on a clean work surface and clean the surface thoroughly after use.
Allow the appliance to cool before storing. · Keep hands, long hair and loose clothing away from the beaters.
Always take care when handling the sharp cutting blades when emptying the bowl and during cleaning.
Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised BLACK+DECKER Service Centre in order to avoid a hazard.

Using an extension cable

Always use an approved extension cable suitable for the power input of this tool (see technical data). Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective. When using a cable reel, always unwind the cable completely.

Features

SM1000 6-Speed Stand Mixer with Stainless Steel Bowl
Ovevriew

Bowl cover
Stainless steel bowl
Multifunction head
Release button
Speed control switch
Mixer blade
Dough hook
Whisk

Assembly

Warning! Before performing any assembly or maintenance, switch off and remove from power supply.

Use

Warning! Let the appliance work at its own pace. Do not overload.

Clean the beaters, dough hook, whisk and bowl before use.
Place the appliance on a flat, steady surface. · Ensure that the power cord is unplugged from the power outlet and the speed selector (5) is set to the “0” position.
Lift the release button (4) & raise the multi function head until it locks in place (Fig. A).
Push the whisk (8), dough hook (7) or mixer blade (6) onto the Mixer drive shaft and rotate it clockwise to lock it in place (Fig. A).
Beaters are for mixing egg white or other liquid, dough hooks are for kneading dough, whisk is for Light mixtures e.g. Cream, eggwhites, blancmange etc.
Add the ingredients to the bowl.
Lower the release button (4) and lower the multi function head until it locks in place. · Attach the bowl cover (1) (Fig. B)
Attach the bowl cover access slot (1a). You can use this to add further ingredients to the bowl while the appliance is in operation.
Connect the unit to a suitable supply.
Rotate the rotary speed control switch (5) to the required setting.
Once mixing is completed, return the speed control (5) to the “OFF” position and disconnect the appliance from the electrical supply.
Press the release button (4) and raise the motor housing until it locks in place.
Remove the mixing attachment by pushing it up and rotating it anti-clockwise.
Remove the bowl (2) by rotating it anti-clockwise and lifting it from the stand.
Warning! Do not place knives, spoons, forks or any other object into the bowl while operating.
Note! The maximum operation time must not exceed 10 minutes. After 10 minutes of use allow the mixer to rest and cool for an appropriate amount of time.
When Kneading dough, best results can be achieved by setting the speed selector at a low speed first and then high speed.
Note! During operation do not touch the bowl.
Warning! Keep hands, long hair and loose clothing away from the beaters.
Warning! Do not operate the Mixer continuously for more than 6 minutes. After operating the appliance continuously for 6 minutes, allow it to cool down for at least 20 minutes before operating it again.

SM1000 6-Speed Stand Mixer with Stainless Steel Bowl
Ovevriew

Cookery tips

Refrigerated ingredients, such as butter and eggs, should be at room temperature before mixing begins. Set these ingredients out ahead of time.
To eliminate the possibility of egg shells in your recipe, break eggs into separate container first, then add to the mixture.
Do not over-beat. Be careful that you only mix/blend mixtures as recommended in your recipe. Fold dry ingredients until they are just combined using the low speed setting.
Climatic conditions. Seasonal temperature changes, temperature of ingredients and their texture variation all play a part in the required mixing time and the results achieved.
Always start mixing at lower speed. Gradually increase to the recommended speed as stated in the recipe.
For “Pulse” setting (kneading at short intervals), turn the speed knob to the “Pulse” position. The appliance works only if the speed knob is maintained in this position, when the knob is released ,it returns automatically to the “0” position.

Accessory| Food| Weight| Operations| Speeds| Remark
---|---|---|---|---|---
Whisk| Egg white| 220g| 3 – 5 mins| 4 – 6|
Beater| Flour| 100g| 5 mins| 1 – 6| Mix all the ingredients for 15 – 30 seconds under low speeds, then work for 4.5 mins under higher speeds.
Sugar| 100g
Butter| 100g
Egg| 2pcs
Dough hook| Flour| 500g| 3 – 4 mins| 1 – 2| With the water temperature at 43°C, mix all the ingredients for 1.5 mins at 1 speed. Then continue mixing at 2 speed until the dough is smooth and elastic. After the dough has expanded, mix for 2 mins at
1 – 2 speed.
Salt| 10g
Yeast| 10g
Sugar| 5g
Water| 250g
Butter| 20g

Cleaning and Maintenance

Warning! Before performing any maintenance:

Switch off and disconnect from the mains supply.
Wait for the appliance to completely cool down.
If necessary scrape excess food particles from the beaters, dough hooks or whiskusing a spatula.
Warning! The appliance must not be immersed in water or other liquid.
Wipe over the outside surface of the head and Base with a damp cloth and polish with a soft dry cloth.
Wipe any excess food particles from the power cord.
Immerse the mixer blade, whisk, dough hook, in warm soapy water for complete cleaning. Then rinse under running water and wipe dry. The mixer blade, whisk and dough hooks may be placed in a dishwasher.

Mains plug replacement

If a new mains plug needs to be fitted:

Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
If the product is class I (earthed), connect the green/yellow lead to the earth terminal

Note! If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the original fuse supplied with the product.
Warning! The above section on mains plug replacement is for authorized service centre persons.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your BLACK+DECKER product needs replacement, or if it is of no further use to you, do not dispose of it with other household waste. Make this product available for separate collection.

BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local BLACK+DECKER office at the address indicated in this manual. Alternatively, a list of authorized BLACK+DECKER repair agents and full details of our after-sales service and contact are available on the Internet at: www.2helpU.com

Warranty

BLACK+DECKER is confident of the quality of its products and offers an outstanding warranty.
This warranty statement is in addition to and in no way prejudices your statutory rights.
If a BLACK+DECKER product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, BLACK+DECKER warranty to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade, professional or hire purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign objects, substances or accidents;
Repairs have been attempted by persons other than authorised repair agents or BLACK+DECKER service staff.

To claim on the warranty, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local BLACK+DECKER office at the address indicated in this manual.

Alternatively, a list of authorised BLACK+DECKER repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.