Sakugi US484 Over The Sink Adjustable Dish Drying Rack Instruction Manual
- May 15, 2024
- sakugi
Table of Contents
INSTALLATION MANUAL
PART DESCRIPTIONS
GUARANTEE
Thank you for choosing Sakugi. If you have any queries regarding your Sakugi product, please feel free to contact us. We will offer you a replacement or a FU LL refund.
E-mail: sakugi.service@gmail.com
INSTALLATION STEPS
Step 1: Insert the As into both ends of B.
After adjusting the length according to the size of your sink, firmly screw As
and B with Rs from the bottom.
Step2: Install the non-slip Qs on the bottom of C. Fasten D to C with the Ps
and 0.
Note: Please make sure the screw hole of frame D is aligned with that of
frame C as shown in picture (1)
Step 3: Fasten the assembled bars on the assembled frames with Ns by using tool 0. You can adjust the height of the upper bar accord ing to the height you need as shown in picture 2. (Ps: Ns is in BarA, it needs to be unscrewed from BarA before fixing it.)
Step 4: Hang up the basket E/F/G and com ponents H/1/J/K/L. To secure these baskets, you can install the Ms on the rack as shown in picture(3).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>