Dolaimi House 3249 3 Light Modern Clear Hammer Glass Kitchen Island Light

Fixture

Product Specifications

• SKU : # 3243/3244/3248/3249/3269D3 (Bulb not included)
• Materials : Metal, Glass
• Power : Do not exceed the recommended wattage

Product Usage Instructions

Assembling Metal Tube Assembly:

1. Insert Metal Tube Assembly (R, S) into Metal Tube Assembly (Q) and secure with Flat Screw (T).

Installing Threaded Pipe and Tubes:

1. Secure Threaded Pipe (M), Short Tube (N), and Long Tube (O) into Lip (P) in the specified order.

2. Place Canopy (K) on Threaded Pipe (M), then secure Flat Washer (I), Ground Wire (H), Washer (G), and Hexnuts (F) into Canopy (K) with Allen Wrench (J) in the specified order.

Attaching Glass Shade:

1. Unscrew Socket Ring (W) from Socket (U), secure Glass Shade (V) on Socket (U) and tighten with Socket Ring (W).

Wiring Terminal Connection:

1. Open the connectors from Wiring Terminal (E).

2. Insert the white/black wire into the hole of the Wiring Terminal (E), then close the connectors securely.

FAQ

• Q: How do I choose the right wattage for the light bulbs?
  • A : Ensure not to exceed the recommended wattage specified for the product to prevent any damage or hazards.
• Q: Can I directly look at a lit bulb?
  • A : Avoid looking directly at a lit bulb to prevent strain on your eyes or potential discomfort.

Dear customer,

Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!

Assembly Instructions

WARNING:

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when the fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E26 TYPE A CFL 10W, LED 6W bulb types and wages. Do not exceed the recommended weights

Parts included

INSTALLATION INSTRUCTIONS

Step 1:

1. Remove all parts and hardware from the box along with all plastic protective packaging.
2. Unscrew the pre-assembled Canopy Nuts (L) from Mounting Plate(D).

Step 2:

Insert Metal Tube Assembly(R,S) into Metal Tube Assembly(Q) and secure with Flat Screw(T).

Step 3:

1. Secure Threaded Pipe(M), Short Tube(N), and Long Tube(O) into Lip(P) in order.
2. Place Canopy(K) on Threaded Pipe(M), then secure Flat Washer(1), Ground Wire(H), Washer(G), and Hexnuts(F) into Canopv(K) with Allen Wrench(J) in order.

Step 4:

1. Open the janitors from Wiring Terminal(E).
2. Insert the white/black wire into the hole of Wiring Terminal(E), then close the janitors.

Step5:

1. Gently pull the wire in the ceiling junction box and let the wire hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.

Step6:

Connect the white wire of the fixture to the white wire of  the supply circuit. Connect the black wire of the fixture to   the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire with the Wire Connector(A).

Step7:

Place the canopy (K) against the mounting surface and fasten the Canopy Nuts(L) to the Mounting Plate (D)

Step8:

1. Unsecure Socket Ring(W) from Socket(U), secure Glass Shade(V) on Socket(U), and secure with Socket Ring(W).
2. Install bulbs(not included) into the Socket

Any questions please free to contact us:

• Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>