LIFT DAX Ear Protection Mount Instruction Manual
- May 15, 2024
- LIFT
Table of Contents
LIFT DAX Ear Protection Mount
Product Information
Specifications
- Product Name: DAX Ear Protection Mount
- Compatibility: Hard hats
- Material: Durable plastic
Product Usage Instructions
Installation Instructions
- STEP 1: Place the mount on the hard hat.
- STEP 2: Mark and drill holes on both sides of the hard hat.
- STEP 3: Align the mount holes with the drilledholes.
- STEP 4: Screw the mounts on and tighten securely.
- STEP 5: Ensure screws are firmly attached to the hard hat.
- STEP 6: Remove any previous brackets, then mount the left and right DAX brackets. Attach left and right earmuffs to their respective brackets.
Note: Make sure to follow all safety precautions while installing the ear protection mount.
Frequently Asked Questions (FAQ)
-
Q: Can this mount be used with all types of hard hats?
A: The DAX Ear Protection Mount is compatible with most standard hard hats. However, it is recommended to check compatibility before installation. -
Q: How do I adjust the earmuffs once they are attached?
A: The earmuffs can be adjusted by sliding them along the brackets to achieve a comfortable fit over your ears.
DAX EAR PROTECTION MOUNT
INSTALLATI ON INSTRUCTIONS
- MARK AND DRILL HOLES ON BOTH SIDES OF THE HARD HAT
- SCREW THE MOUNTS ON AND TIGHTEN
- ENSURE SCREWS ARE FIRMLY ATTACHED
- REMOVE PREVIOUS BRACKETS, MOUNT LEFT AND RIGHT DAX BRACKETS
- ATTACH LEFT AND RIGHT EARMUFFS TO THEIR RESPECTIVE BRACKETS
- RE-INSTALL THE LINER AND THE INSTALLATION IS COMPLETE
FOR LIFT SAFETY PERMENENT NOISE CONTROL HEARING PROTECTION – REV: 1.0, 09/12/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>