LECTRIC XP Suspension Seat Post User Guide
- June 4, 2024
- LECTRIC
Table of Contents
LECTRIC XP Suspension Seat Post
How to correctly install your suspension seatpost
MAX Weight Capacity: 220lbs
STEP 1
Use a 14mm wrench to loosen the nuts on the bottom of the saddle rails and
separate the saddle from the seat post.
STEP 2
Insert your new suspension post into the frame and re-engage the seatpost
collar. At this time you can slightly adjust the tilt of your seat and the
front to back position.
STEP 3
Make sure to evenly tighten both sides until wrench leaves an impression on
your palm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>