TNICER T3 Helmet Bluetooth Headset Instruction Manual

: March 22, 2024
: TNICER

TNICER T3 Helmet Bluetooth Headset

INSTRUCTION MANUAL

Product Introduction

Thank you for choosing the TNICER T3 helmet Bluetooth intercom headset, which is designed for motorcycle riders to meet the needs of people in the process of riding, such as talking, answering phone calls, listening to music, listening to FM radio and receiving GPS navigation voice prompts.Provide you with a clear, safe and comfortable experi-ence during the ride.

TNICER T3 has the latest version 5.2 Bluetooth chip , stable system operation, dual intelligent noise cancellation, low power consumption, with 40MM high quality speakers and intelligent pickup microphone, support 8 devices connected to achieve multiple people communica-tion. The T3 is a high-tech Bluetooth headset that combines light weight, energy saving and humanized design.

Product Introduction Diagram

Function Description

Qualcomm version 5.2 Bluetooth chip
Intelligent DSP audio processing, the 12th generation of CVC noise reduction processing, 16K voice bandwidth transmission rate
1000m 8-way Bluetooth intercom
High pairing speed
Audio multitasking
3 EQ sound effects
Music sharing
CVC noise reduction
Ambient sound reception
FM radio
Voice assistant
Automatic answer, support last dialed number redial
Intelligent microphone
Support voice communication at 120 km/h speed
40mm tuning speaker, wonderful sound experience
IP67 level waterproof
Support pairing with other brands headsets

Button Functions and Operations

Power on/off

Power on : Press and hold the [multi-function button + intercom button] for 3 seconds, the power-on prompt will sound, the blue and green light will be on.
Power on: Press and hold the [multi-function button + intercom button] for 3 seconds, the power off prompt sounds, and the red light is on.

Reset: In the device power-on state, press and hold the [multi-function button + Volume down button] for 3 seconds,the red and blue lights are on at the same time means it has been reset.

Answering Function

Answer incoming calls: When there is an incoming call, short press [multi-function button] to answer the call.
Auto-answer: In the device standby state, long press [intercom button+ volume down button+volume up button] for 5 seconds to turn on auto-answer.

Reject: Press and hold [multi-function button] for 2 seconds to reject the call when you hear an incoming call ringing.
End call: During a call, short press [multi-function button] to end the call.
Last redial: In standby mode, quickly double-click [multi-function button] to automatically dial the last number dialed.
Cancel auto-answer: If you don’t need the auto-answer function, you can long press [intercom button + volume up button+volume down button] for 5 seconds to cancel the auto answer.

Music Control

① Play/Pause: Intercom Bluetooth connection state, short press [multi- func-tion button] to play music, short press [multi-function button] again to pause the music.
② Next song: Long press the [volume down button] for 3 seconds to select the next song.
③ Previous song: Long press the [volume up button] for 3 seconds to select the previous song.

Volume Adjustment

Short press the [volume up button] to increase the volume, short press the [volume down button] to decrease the volume.

FM Radio

① Turn on the radio: in standby mode, short press the [multi-functionbut- ton+volume down button] to start the FM radio.
② After turning on the FM radio, every time you long press the volume up or volume down button for 3 seconds, you can tune and select channels (Note: short press the volume up/down key to enter the volume adjustment mode, you can increase the volume or decrease the volume at this time).
③ Turn off the radio: short press the [multi-function button+volume down button], FM off.

Attention

1. When the indoor signal is weak, in order to make the FM radio work best, you can try to turn on the FM radio near the window or outdoors.
2. In radio mode, when there is an incoming call, the headset will automatically disconnect the radio and answer the phone. Or enter the backlink intercom voice and automatically revert to the radio function when the call ends.

Ambient sound mode

① Ambient sound on: In standby mode, short press [Mode button] 2 times to turn on the ambient sound.
② Ambient sound off: In standby mode, short press [Mode button] 2 times to turn off the ambient sound.

Pairing Operation

Bluetooth pairing with cell phone

1. Turn on Bluetooth: In the power-on state, press and hold the [multi- function button] for 5 seconds, until the red and blue lights flash alternately.At this time has entered the Bluetooth waiting to connect state. If you have connected to other devices, the blue light will flash slowly.Please reset and turn on the device again.

2. Search cell phone Bluetooth: In the state of red and blue lights alternately flashing, open the cell phone Bluetooth settings, search for nearby Bluetooth devices, select “Tnicer-T3” for connection pairing, after successful connection there will be a voice prompt “device is connected”, then the Bluetooth pairing success.

Attention：

1. If you have connected to other phones, the blue light will flash slowly, please reset and turn on the device again.
2. Search for cell phone Bluetooth, select “Tnicer-T3” connection pairing, click to connect.When the pairing is successful, it will be accompanied by the voice prompt “device is connected”, and the Bluetooth connection is successful. If the connection fails, you can click “Forget this device” in the Bluetooth list on your phone and search for the connection again.

Pairing and intercom between headsets

1. Pairing and intercom between two Bluetooth intercoms (A,B)

Active/passive pairing operation:

Turn on the two Bluetooth intercoms (A,B), press and hold the A,B intercom [intercom button] for 3 seconds.
At this time, red and blue lights alternately flashing, passive pairing mode on.
Short press the [intercom button] of A, red and blue lights alternately slow flashing, into the active pairing mode.When you hear the “search” prompt voice, active pairing is on.
voice prompt “device is connected”, the two intercoms connected successfully, the blue light flashes slowly.

Attention：

1. After the intercom pairing is successful, when intercom, if there is a cell phone call, the device will automatically cut off intercom. After the call is over, it will automatically connect back to the intercom state.
2. In the process of intercom, because of distance or environmental factors such as disconnection, you can manually short press the [intercom button] once, manually back to connect.
3. When the device is in standby mode, short press the [intercom button] to talking; short press the [intercom button] to turn off the talking in the talking state. Short press the volume up/down button to adjust the talking volume.

Multiple Intercom Pairing Procedure

Automatic pairing steps (as 6 intercoms for example)

Turn on all intercoms (123456), long press all intercoms [[intercom button] for 3 seconds to turn on the passive pairing mode, until the red and blue lights alternately flashing.
Choose any one intercom and short press [[intercom button] of it , the red and blue lights will flash alternately slowly, at this time this intercom enter the automatic pairing mode, there will be a voice prompt “searching”.
At this point, just wait for the other intercoms to pair automatically one by one, and the device will voice prompt “device is connected” one by one.When the blue light on the multi-function buttons and intercom buttons of all intercoms flashing slowly, it means that all six intercoms have been successfully connected.

Attention:

Due to the use of different environments and external interference factors, it is recommended that the effective distance within 1000 meters, the longer the distance to bring more interference factors will affect the experience.

Turn on sharing:
When two devices are on, music sharing must be done by the device that initiates intercom in order to share to each other, such as specifying device A to share to device B. The operation steps are as follows:

1. Device A connects to the Bluetooth of the cell phone (keep the music on and the music is paused).
2. Pair the two devices A and B (keep the two devices in non-intercom state).
3. After successful pairing, press and hold the [mode button] of device A for 2 seconds to turn on music sharing.The blue light flashes slowly and the voice prompts “start sharing music “, then music sharing is successful.

Turn off sharing:
In the process of music sharing, press and hold the [mode button] of device A for 2 seconds to turn off music sharing.The blue light flashes slowly, and the voice prompts “stop music sharing”, then music sharing is off.

Attention：

1. Headset A that initiates music sharing must be connected to cell phone Bluetooth.
2. A and B Headsets need to be paired and connected successfully before music sharing.
3. When sharing music, the A headset that initiates music sharing can pause/start sharing by short pressing [multi-function button].

Voice assistant
In standby state, short press [mode button] to enter the voice assistant function.At this time, the blue light flashes slowly.

Last number redial
In standby mode, short press [Multi-function key] twice to redial the last number. At this time, the blue light flashes quickly.

Reset
In the power on state, long press [multi-function button+ volume up button] for 3 seconds, the red and blue lights up at the same time to reset.

Battery level reminder
In standby mode, short press [volume down button+ volume down button], the voice will announce the battery level of the device.When the battery level is too low, there will also be a low battery reminder.

EQ sound effects selection
IDuring music playing, short press [mode button] to switch the sound effect, accompanied by voice prompts, each short press [mode button] can switch a different sound effect.

Installation

Method 1: Use double-sided adhesive tape

Method 2: Use metal clip

Quickly remove the Bluetooth headset from the helmet

First unplug the audio cable, then one hand fixed intercom, use your fingers to press down hard on the fixed clips on the mounting bracket, you can hear the sound of loose equipment to smoothly remove the headset from the helmet.

T3 Package List

1. IntercomX1
2. Speaker & microphoneX2
3. Mounting bracketX1
4. Single-sided silicone padX2
5. Double-sided silicone padX2

6. Metal clipX1
7. Speaker velcroX2
8. Square velcroX2
9. Charging cableX1
10. ManualX1

Charging Instructions:

1. Before using the Bluetooth intercom, please use the attached special charging cable tocharge the intercom. The TYPE-C connector on the charging cable connects to the charging port of the Bluetooth intercom, and the USB connector on the charging cable connects to the following charging port for power supply.

A. USB port of the computer
B. Mobile power supply with DC 5V output
C. The output is DC 5V USB power adapter

2. When charging, the red LED light is stays on. When fully charged, the red light is off and the blue light is on. It takes about 1.5 hours from low battery to full charge.

Product Parameters

Working distance: 8-way intercom, 1000m working distance between 2 riders
Working frequency: 2.4GHz
Bluetooth version: Bluetooth 5.2
Support Bluetooth protocol: HSP/HFP/A2DP/AVRCP
Battery type: 1000mAh rechargeable lithium polymer
Standby time: 350 hours
Talking time: 15 hours of cell phone talk/intercom
Charging time: about 2 hours
Power adapter: DC 5V 1A (optional)
Charging interface: TYPE-C interface
Operating temperature: 0℃-50℃

Specifications:

Bluetooth Version: 5.2
Noise Cancellation: Dual intelligent noise cancellation
Speakers: 40MM high quality speakers
Microphone: Intelligent pickup microphone
Connectivity: Supports connection for up to 8 devices

Caution

① If you do not use the device for a month or more, in order to protect the device lithium battery, please charge the device every two months.
②Do not expose the product to open flame to avoid explosion.
③ Device can not be opened by themselves, so as not to short circuit the main board or battery damage, affecting the normal use, be sure to pay attention.

More installation and operation videos are available on our official Youtube channel.

YouTube channel: TNICER

After-sales service email:

tnicerservice@tognicer.com
If you have any questions, please feel free to contact us through the after- sales mailbox.