MOUSER ELECTRONICS CC3100MODR11MAMOB Module User Manual
- June 3, 2024
- MOUSER ELECTRONICS
Table of Contents
User’s Manual
CC3100MODR11MAMOB Module
CC3100MODR11MAMOB Module
Revision History
9-2-2022 Rev 5
10-18-22 Rev 6: Corrected Molex Antenna from 1461530100 to 1461530200. Added
missing Product Attributes for Taiyo Yuden AH316M245001-T, Laird CAF94505, and
Taoglas FXP 840.07.0055B. 10-20-22 Rev 7: Modified section “2.” to add antenna
table listing host product family. Also added a table to “RF Exposure”
statement. 10-21-22 Rev 8: Edited “Host Conditions” in antenna table and RF
exposure statement per request.
Introduction
The CC3100MODR11MAMOB module allows for Wi-Fi 802.11b/g/n communications from
Knox products to connect with the KnoxConnect™ system using a Molex
1461530200, Laird CAF94505, Taoglas FXP840.07.0055B, Air802 ANRD2405-RPSMA,
Larsen NM05E2400B, or Taiyo Yuden AH316M245001-T antenna. It is built from a
standard networking component acquired from a large semiconductor supplier to
ensure a long-lifetime secure supply in support of Knox products.
This CC3100MODR11MAMOB module is placed into the product whose labels state
“This Device
Contains: FCC ID: 2AOVI-KNOX-RAS and IC: 23479-KNOXRAS”.
Use
NOTE: The CC3100MODR11MAMOB is certified to be used with the following antennas and product families. The user is expected to operate it only in this fashion. Changes or modifications not expressly approved by Knox Company void the user’s authority to operate the equipment.
| Antenna | Gain dBi | Host Conditions |
|---|---|---|
| Molex 1461530200 | 3. | No host restriction |
| Laird CAF94505 | 2.0 | Restricted to KeyDefender product family hosts. |
| Taoglas FXP840.07.0055B | 3. | Restricted to KeyDefender product family hosts. |
| Larsen NMOSE2400B | 5.0 | No host restriction |
| Air802, ANRD2405-RPSMA | 5.0 | No host restriction |
| Taiyo Yuden AH316M245001-T | 2. | No host restriction |
The antennas have the following specifications:
Molex 1461530200
Product Attributes
| TYPE | DESCRIPTION |
|---|---|
| Category | RF/IF and RFID |
RF Antennas
Mfr| Molex
Series| 146153
Package| Bulk CD
Product Status| Active
RF Family/Standard| 802.15.4, WiFi
Frequency Group| UHF (2GHz – 3GHz), SHF (f > 4GHz)
Frequency (Center Band)| 2.4GHz, 5GHz
Frequency Range| 2.4GHz – 2.4836Hz, 5.15GHz – 5.85GHz
Antenna Type| Flat Patch
Number of Bands| 2
VSWR| –
Return Loss| -10dB
Gain| 2.6dBi, 4dBi
Power – Max| 2W
Features| Cable – 200mm
Termination| U.FL (UMCC), IPEX MHF1
Ingress Protection| –
Mounting Type| Adhesive
Height (Max)| 0.004′ (0.10mm)
Applications| WLAN, Zigbee-
Base Product Number| 146153
Laird CAF94505
Taoglas FXP840.07.0055B
The Air802 ANRD2405-RPSMA antenna has the following Specifications:
| Type | External rubber ducky |
|---|---|
| Gain | 5 dBi |
| Impedance | 50 ohms |
| Termination | Reverse polarity SMA (RP_SMA) plug male connector on the antenna, |
to RP_SMA female
bulkhead connector, to U.FL connector, to the Printed Circuit Board Assembly.
The Larson NM05E2400B Antenna has the following specifications
| Type | External Collinear |
|---|---|
| Gain | 5 dBi |
| Impedance | 50 ohms |
| Termination | Reverse polarity SMA (RP_SMA) plug male connector on the antenna, |
to RP_SMA female
bulkhead connector, to U.FL connector, to the Printed Circuit Board Assembly.
Taiyo Yuden AH316M245001-T
This module complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la classe A est conforme a la norme NMB-003 du Canada.
Concerning EVMs Including Detachable Antennas:
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication. This radio transmitter has been
approved by Industry Canada to operate with the antenna types listed in the
user guide with the maximum permissible gain and required antenna impedance
for each antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
RF Exposure statement
This product has been evaluated for RF exposure and determined to meet
applicable requirements via low-power exemption. This module may be installed
into products where antenna to user distance is greater than 20cm. Only the
following antennas are approved to be used with this module:
| Antenna | Gain dBi | Host Conditions |
|---|---|---|
| Molex 1461530200 | 3. | No host restriction |
| Laird CAF94505 | 2.0 | Restricted to KeyDefender product family hosts. |
| Taoglas FXP840.07.0055B | 3. | Restricted to KeyDefender product family hosts. |
| Larsen NMO5E2400B | 5.0 | No host restriction |
| Air802, ANRD2405-RPSMA | 5.0 | No host restriction |
| Taiyo Yuden AH316M245001-T | 2. | No host restriction |
General
The OEM should not provide information to the end user regarding the
installation or removal of this RF module or information on how to change RF-
related parameters in the user manual of the end product.
The OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for
example, digital device
emissions, PC peripheral requirements, etc.).
Finished Product Labelling
This Module is labeled with its own US and Canada Certification numbers. If
the certification numbers cannot be seen while installed inside the finished
product, then the finished product must display the label on it referring to
the module. In that case, the finished product must be permanently labeled on
the exterior of the product with wording such as the following:
“Contains Transmitter Module FCC ID: 2AOVI-KNOX-RAS” OR “Contains FCC ID:
2AOVI-KNOX- RAS”. “Contains Transmitter Module IC: 23479-KNOXRAS” OR “Contains
IC: 23479-KNOXRAS”. Or similar text which conveys the same meaning. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
** If the product is too small to include the above statement, it may be
placed in the user’s manual.
The following warnings must also be placed in the User Manual of the
finished product using this module:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
For a Class A digital device or peripheral, place the following warning:
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
For a Class B digital device or peripheral, place the following warning:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
If the antenna used in the finished product is detachable or user
serviceable then the following must be included:
This radio transmitter IC: 23479-KNOXRAS has been approved by Industry
Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with
this device.
- Antenna: Molex 1461530200
- Antenna: Laird CAF94505
- Antenna: Taoglas FXP840.07.0055B
- Antenna: AIR802 model ANRD2405-RPSMA 5dBi Whip
- Antenna: Larsen NM05E2400B 5 dBi Whip
- Antenna: Taiyo Yuden AH316M245001-T
- Only include the specific antenna(s) used with the particular host integration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>