TNICER T2 1000m Motorcycle Bluetooth Headset User Guide

The Way of TNICER Connects and Intercoms with
Other Brands of Bluetooth Headsets

T2 1000m Motorcycle Bluetooth Headset

TNICER Connects and Intercoms with Cardo Packtalk Edge

Three or More Riders Intercom

Connection Instructions (Two or More TNICER with One Cardo)
Take three Bluetooth headsets (A, B and C) as an example. Under the premise that all three Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode open.
2. long press the headset B [multi-function button] for 3 seconds, until the red and blue lights flashes rapidly, at this time the passive pairing mode is open. A, B headset connected successfully.
3. A, B headset connected successfully, long press the C headset [phone button] for 5 seconds, until the red and blue lights flash, at this time the passive pairing mode is on.
4. long press the B headset [intercom button] for 3 seconds, until the red and blue lights flash slowly, then the active pairing mode is on.
5. all three headsets’ blue light slow flashing. A, B, C headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B headset.
2. short press B headset [intercom button] to turn on/off the intercom with the C headset.

Two Riders Intercom

Connection Instructions

Take two Bluetooth headsets (A, B) as an example. Under the premise that both Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the A headset [intercom button] for 3 seconds, until the red and blue lights flash slowly, active pairing mode on.
2. long press the B headset [phone button] for 5 seconds, until the red and blue lights flash, passive pairing mode on.
3. both headsets’ blue light flashes slowly, at this time A, B headset connected successfully.

The Way to Turn On the Intercom

1. Short press the [intercom button] of A headset to turn on/off the intercom with B headset.

TNICER Connects and Intercoms with Fodsports M1-S PRO

Connection Between Two or more TNICER with One Fodsports.

Connection Instructions

Take three Bluetooth headsets (A, B and C) as an example. Under the premise that all three Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
2. long press the headset B [multi-function button] for 3 seconds, until the red and blue lights flashes rapidly, at this time the passive pairing mode is on. A, B headset connected successfully.
3. After the A, B headset connected successfully, long press the C headset [function button] for 5 seconds, until the red and blue lights flash, at this time the passive pairing mode is on.
4. long press the B headset [intercom button] for 3 seconds, until the red and blue lights flash slowly, then the active pairing mode is on.
5. all three headsets’ blue light slow flashing. A, B, C headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B and C headsets.
2. short press B headset [intercom button] to turn on/off the intercom with the A and C headsets.
3. short press C headset [intercom button] to turn on/off the intercom with the A and B headsets.

Connection Between Two or more TNICER with One Fodsports

Connection Instructions
Take three Bluetooth headsets (A, B and C) as an example. Under the premise that all three Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
2. long press the headset B [function button] for 5 seconds, until the red and blue lights began to flash, at this time the passive pairing mode is on. A, B headset connected successfully.
3. After the A, B headset connected successfully, long press the C headset [function button] for 5 seconds, until the red and blue lights flash, at this time the passive pairing mode is on.
4. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
5. all three headsets’ blue light slow flashing. A, B, C headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B and C headsets.
2. short press B headset [intercom button] to turn on/off the intercom with the A and C headsets.
3. short press C headset [intercom button] to turn on/off the intercom with the A and B headsets.

Two Riders Intercom (TNICER as Headset A, Fodsports as Headset B)

Connection Instructions
Take two Bluetooth headsets (A, B) as an example. Under the premise that both Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the A headset [intercom button] for 3 seconds, until the red and blue lights flash slowly, active pairing mode on.
2. long press the B headset [function button] for 5 seconds, until the red and blue lights flash, passive pairing mode on.
3. both headsets’ blue light flashes slowly, at this time, A, B headset connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B headset.
2. short press B headset [intercom button] to turn on/off the intercom with the A headset.

Two Riders Intercom (Fodsports as Headset A, TNICER as Headset B)

Connection Instructions
Take two Bluetooth headsets (A, B) as an example. Under the premise that both Bluetooth
headsets have been turned on, the operation steps are as follows.

1. long press the A headset [intercom button] for 5 seconds, until the red and blue lights flash, active pairing mode on.
2. long press the B headset [function button] for 3 seconds, until the red and blue lights flashes rapidly, passive pairing mode on.
3. both headsets’ blue light flashes slowly, at this time, A, B headset connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B headset.
2. short press B headset [intercom button] to turn on/off the intercom with the A headset.

TNICER Connects and Intercoms with Sena 50R

Connection Between Two or more TNICER with One Sena

Connection Instructions
Take three Bluetooth headsets (A, B and C) as an example. Under the premise that the two TNICER Bluetooth headsets have been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
2. long press the headset B [multi-function button] for 3 seconds, until the red and blue lights flashes rapidly, at this time the passive pairing mode is on. A, B headset connected successfully.
3. In the C headset off state, long press the C headset [plus key + center key] for 5 seconds, at this time the red and blue lights flashing, phone mode on.
4. long press the headset B [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
5. all three headsets’ blue light slow flashing. A, B, C headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B and C headset.
2. short press B headset [intercom button] to turn on/off the intercom with the A and C headset.

Connection Between Two or more Senawith One TNICER

Connection Instructions

Take three Bluetooth headsets (A, B and C) as an example. Under the premise that the TNICER Bluetooth headset has been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.

2. In the B headset off state, long press the B headset [plus key + center key] for 5 seconds, the red and blue lights flash, the phone mode is on.
   A, B headset connected successfully.

3. In the C headset off state, long press the C headset [plus key + center key] for 5 seconds, the red and blue lights flashing, at this time the phone mode on.

4. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.

5. all three headsets’ blue light slow flashing. A, B, C headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B and C headset.
2. short press B headset [center key] to turn on/off the intercom with the C headset.
3. short press C headset [center key] to turn on/off the intercom with the B headset.

Two Riders Intercom (TNICER as Headset A, Sena as Headset B)

Connection Instructions
Take two Bluetooth headsets (A, B) as an example. Under the premise that TNICER headset have been turned on, the operation steps are as follows.

1. long press the headset A [intercom button] 3 seconds, until the red and blue lights began to flash slowly, at this time the active pairing mode on.
2. In the B headset off state, long press the B headset [plus key + center key] for 5 seconds, at this time the red and blue lights flashing, phone mode on.
3. both headsets’ blue light slow flashing. A, B headsets connected successfully.

The Way to Turn On the Intercom

1. short press the A headset [intercom button] to turn on/off the intercom with the B headset.

Connection Precautions

1. Please strictly follow the brand corresponding to A,B,C in the diagram and operate in order.

2. Due to the use of different environments, external interference factors, please intercom within the ideal distance of the headset.
   Overlong distance will make a variety of interference factors increase, such as interruption of intercom and excessive noise, etc.

3. After the device is successfully connected, the device will automatically cut off the intercom if there is an incoming call from a cell phone during the intercom.
   After the call is over, it will automatically or manually connect back to intercom status according to different models headsets.

4. When different models headsets are connected to each other, please follow their respective operations of turning on and off the intercom to use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>