STEAUTY 12V DC Diesel Fuel Transfer Pump Kit User Manual
- May 15, 2024
- STEAUTY
Table of Contents
DIESEL PUMP BOX
STEAUTY
Owner’s Manual
USER MANUAL
Dear Customer:
Thank you for choosing STEAUTY Diesel Pump, please read the manual carefully
before use, do not operate this machine without reading the manual carefully.
If you encounter any problems before or during the use of this product, please
do not hesitate to contact us. Our professional after-sales team will provide
you with the fastest service within 24 hours.
Customer support is our driving force for continuous innovation!
Product Data:
Rated Power: 380W
Rated Voltage: DC12V
Rated Flow Rate: 10.5Gal/min
Suction Lift:3-5m(9.84-16.4ft)
Head of Delivery:8-10m(26.25-32.8ft)
Please Note:
- Confirm whether the power supply is consistent with the standard power supply before use.
- Voltage tolerance + 5%, DC power supply 12V, pay attention to positive and negative poles when connecting.
- Before use, ensure that the inlet and outlet oil pipes and joints are tightly connected to prevent leakage, affecting the use safety and operating power.
- A filter screen must be installed at the oil inlet to ensure the cleanness of the oil and prolong the service life of the motor.
- The single use time of the product cannot exceed 20 minutes.
- Adolescents under the age of 18 are prohibited from using this product.
- It is strictly forbidden to operate this product without supervision.
- Use this product in an open and safe place. Keep away from inflammables when using. It is forbidden to produce open fire (such as smoking) when using.
- Try to avoid motor idling, which will cause damage to motor blades and shorten the service life.
- Do not use it to transfer water as much as possible. If it is necessary to draw water, it should be washed with diesel oil or kerosene after use, which is conducive to extending the service life.
- The oil pump inlet and outlet and the interface of the oil gun should be wrapped with raw tape or sealant to enhance the sealing and avoid leakage
WARNING: It is strictly prohibited to transport low ignition point liquids (such as gasoline, alcohol, LPG, etc.)
Common Problems and Solutions:
| Phenomenon | Reason | Solution |
|---|---|---|
| No oil output at the initial use | (+), (-) pole is reversed | Connect the (+) |
and (-) poles correctly
Air leak in and out of the oil pipeline| Connect the oil inlet pipe and lock
the pipe lock
A small amount of the pumped fluid is not added before starting| Add a little
of the oil being pumped
Low flow rate| Low supply voltage| Increase the power supply voltage, but do
not exceed the voltage tolerance
Suction range, head exceeds the standard| Appropriately lower the lifting
height or shorten the conveying distance
Foreign matter in the oil feed screen| Clean the filter regularly
Blade wear| Replacing blades
【Free replacement parts within 36 months】
For the upgraded Steauty’s diesel transfer pumps, we provide spare parts
replacement service within 36 months, we are happy to replace the spare parts
for you free of charge as long as they are faulty, don’t hesitate to contact
us in time! You can use it with confidence.
After-sales email: [email protected]
After-sales WhatsApp: +86 13213105602