SONOS RAY Compact Soundbar for Music User Guide

SONOS RAY Compact Soundbar for Music

Overview

The compact soundbar for music, TV, and more-

• Quick and easy setup, with only one cable to connect to your TV.
• Great sound for compact spaces-versatile design allows you to set it on a credenza, mount it on a wall, or place it inside a TV stand.
• Stream music, radio, podcasts, and more when the TV is off.
• Expandable. Add a Sub and two Sonos speakers, like Ones, for 5.1 surround sound.
• Control your Sonos system with the Sonos arm (for Android and iOS).
• See SetuR when you’re ready to add Ray to your Sonos system.

Controls and lights

Volume control

Touch for small adjustments or touch and hold to quickly change the volume:

• • Volume up (right)
• • Volume down (left)

Note : You can also use the Sonos app or your TV remote.

Play/Pause

• Touch to play or pause audio.

Next/Previous (music only)

• • Swipe right across the touch controls to skip to the next song.
• • Swipe left to go to the previous song.

Note: You can’t skip forward or go back when listening to a radio station.

Status light

• Displays the product’s connection to WiFi, indicates when the volume is muted, and signals errors. Learn more

Connector panel

1. Join button
2. AC power (mains) input
3. Optical port
4. Ethernet port

• Press to connect during setup.
• Use only the supplied power cord (using a third-party power cord will void your warranty).
• Use to connect the soundbar to your TV.
• Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).

Select a location

You can wall mount Ray above or below your TV, or place it in or on a TV stand.
TV stand placement

• Place horizontally on a stable and level surface at least 2″ (50mm) from the TV.
• Don’t place it vertically or on its side.
• Don’t block the TV’s IR sensor.
• If put on a shelf, place at the front and keep 2″ (minimum) clearance on both sides for best sound quality.
• Keep 1″ (25mm) space (minimum) above Ray so you can reach the touch controls.
• For best sound quality, keep both ends of Ray at least 1″ (30cm) from a wall or other obstruction.
• Make sure the touch controls are facing up.

Wall mount
You can secure the soundbar to a wall with a compatible wall mount. We recommend the custom-designed Sonos Ray Wall Mount (sold separately). See Wallmount for more information.

Connect the cables

Before you start

• Disconnect existing home theater or surround sound equipment from your TV.
• Connect any external devices, like a cable box or DVD player, directly to your TV.
• Turn your TV on.

1. Connect the power cord and plug in the soundbar.
   Note: Use only the supplied power cord (using a third-party power cord will void your warranty).

2. Connect the optical cable (included) to the optical port on the back of your soundbar.

3. Connect the optical cable to your TV’s optical digital OUT port
   (The TV’s optical adapter’s port is “D-shaped” -make sure the connector aligns correctly with the port. Inserting the adapter incorrectly may damage the cable.)

Product settings

You can customize Sonos products for your surroundings. Go to System and select a product.

Room Name
If you move your speaker to a new room, you can change its name in the settings.

Turn off WiFi (not on portable products)
You can turn off your speaker’s WiFi when it’s connected to your network with an Ethernet cable. This reduces power consumption and can improve connectivity for some wired speakers. For products like Amp and Port, turning off WiFi can reduce the internal temperature when they’re placed in a rack or stacked. Learn more
EQ
Sonos products ship with preset equalization settings You can change the sound settings (bass, treble, balance, or loudness) to suit your personal preferences. Learn more
Trueplay
Trueplay adapts the sound for your surroundings and content . Learn more
Volume Limit
You can set a maximum volume for each room. Learn more
Status Light
Displays the speaker’s connection to WiFi, indicates when the volume is muted, and signals errors. Learn more
Note: If the light is distracting, you can turn it off in your product’s settings.
Touch Controls
You can disable the touch control buttons on your speaker. You may want to do this to prevent a child or curious pet from accidentally adjusting playback
or volume. Learn more

Home theater

Sonos products for your TV provide full-theater sound and play music too. Create a home theater system by adding a pair of rear surrounds and a Sub. Home theater settings
Use the Sonos app to adjust sound settings or change the way your home theater speaker works with your TV.
TV Dialog Sync
If the TV audio is out of sync with the video, you can adjust the audio delay (lip sync) in your room’s settings. Learn more
Group Audio Delay
If you notice audio issues when playing to a group, you can adjust this setting. Learn more
TV Autoplay

TV Autoplay-if music or other content is playing when you turn on your TV, the audio automatically switches to TV audio (default). If you don’t want this to happen, turn off the TV Autoplay in your room’s settings. Ungroup onI Autoplay-if your home theater speaker is grouped with other products when you turn on the TV, it automatically drops from the group (default). If you don’t want this to happen, turn off Ungroup on Autoplay in your room’s settings.
Speech enhancement
Makes TV dialog easier to hear. Learn more
Night sound
Enhances quiet sounds and reduces the intensity of loud sounds. Turn on to reduce the volume while still experiencing proper balance and range. Learn more
UselR
Allow an IR remote to control Sonos.
Remote Control Setup
During setup, you’ll program a remote control. You can program a different remote control at any time. Learn more

Set up surround speakers

It’s easy to turn two Sonos speakers (same model), or a Sonos Amp and your favorite non-Sonos speakers, into separate right and left channels for your home theater.

1. Place each surround speaker about 10ft from your favorite listening position, angling them toward the seating area.
2. Go to System.
3. Select a room with a soundbar and choose Add Surrounds to get started.

Note: If you group the rooms or create a stereo pair instead, you won’t have surround sound. Learn more
Surround audio settings
During setup, surround sound is optimized for your room. These settings are adjustable:
Surrounds
Turn surround sound On or Off.
TV Level
Adjust surround volume for TV audio.
Music Level
Adjust surround volume for music.
Music Playback
Ambient (subtle) or Full (louder, full range). Doesn’t apply to Dolby Atmos Music playback.

Trueplay

Every room is different. Trueplay tuning measures how sound reflects off walls, furnishings, and other surfaces in a room, then fine-tunes your Sonos speaker to make sure it sounds great no matter where you’ve placed it. Trueplay works on iOS mobile devices running iOS 8 or later. During tuning, you’ll move around the room holding your mobile device.

1. Select the system, and pick the room you want to tune.
2. Choose Trueplay Tuning to get started.

Note: Trueplay tuning isn’t available if VoiceOver is enabled on your iOS device. Turn VoiceOver off in your device settings before tuning your speakers.
Auto Trueplay
Portable Sonos products like Sonos Roam and Move can tune themselves automatically. Auto Trueplay uses your speaker’s microphone to detect the environment and make periodic tuning adjustments so you get great sound wherever your speaker is and whatever you’re listening to. Go to The system, and select your portable speaker to turn on auto Trueplay.

Accessories

Find the perfect accessory for your Sonos system tailored to perfectly fit your Sonos products.
For a -full selection of Sonos-compatible stands, wall mounts, chargers, and cables, see Accessories on our website.

Wall mount

Use the Ray wall mount kit (sold separately, available at sonos.com). It’s designed for mounting on a flat wall.
Guidelines

• Leave enough space between Ray and your TV so you can reach Ray’s touch controls.
• For best sound quality, keep both ends of Ray at least 1′ (30cm) from a wall or other obstruction.

Mount kit contents

• Wall mount bracket
• 2 short attachment screws
• 2 wall anchors
• 2 wall screws

What you’ll need

• Pencil
• Phillips-head screwdriver
• Power drill (if needed for installation location)
• Measurement tool
• Level
• Stud finder (optional)

Wall mount Pre-drill                       Use wall anchors            Use screws

• Wood stud 1/8″ 13mm bit                          No                               Yes
• Drywall (no stud) 5/16″ I 8mm bit                      Yes                                 Yes
• Hard wallboard or double board 5/16″ I 8mm bit                       Yes                                Yes
• Plaster 5/16″ I 8mm bit                       Yes                               Yes
• Concrete or brick 5/16″ I 8mm bit                     Yes                               Yes

Set it up

1. If your TV is wall-mounted, align the top edge of the bracket with the bottom of your TV, leaving at least 2.5 inches (mm) between them.
2. Mark the screw locations and remove the bracket.
3. If you’re using wall anchors, use a 5/16″ drill bit to drill pilot holes, starting with the hole on the left. Then insert the wall anchors. Don’t use wall anchors if you’re drilling into wood or plastic. See Wall mounting information.
4. Position the wall mount bracket over the screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the center notch is pointing up.
5. Using a Phillips head screwdriver, fasten the 2 attachment screws to the back of the soundbar, making sure they are fully tightened.
6. Remove the protective cap from the optical cable, then connect the power and optical cables to the back of the soundbar.
7. Slide the soundbar down so the attachment screws fit into the slots on the wall bracket. Make sure the touch controls are facing up and Sonos Ray is fully seated.

Specifications

Important safety information

1. Read these instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry soft cloth. Household cleaners or solvents can damage the finish on your Sones products.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. This product does not have any user-serviceable parts. Do not open or disassemble or attempt to repair it or replace any components. Refer all servicing to Sones qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
13. The Mains plug should be readily available to disconnect the equipment.
14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
15. Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>