AMA-RF01 Remote Control User Manual
- October 30, 2023
- AMA
Table of Contents
Remote Control
AMA-RF01 Remote Control
Model Name: AMA-RF01
Tradename:AMA
Usage Environment
Normal air (not suitable for use in water or liquids)
Operating temperature: 10°C ~ 45°C
Maximum humidity: 90%
Maximum operating frequency: 315MHz
Software Version
OST-AMA-FCC V1
Hardware Version
DYRF012-001-V5.0
Rated Input Specifications
Input: 3.0V / 11mA (operating), 3.0V / 10uA (standby)
User Manual
Rated Voltage: 3.0V
Operating Temperature: 10°C ~ 45°C
Product Diagram
Usage Instructions
Pairing
It requires pairing before remote controller can function properly with fan
control box. After powering on fan control box, press and hold Function Off
button on remote controller for 10 seconds until the indicator light on fan
control box flashes rapidly, indicating successful pairing.
General Operation
Once the pairing is done, remote controller can be used to control the fan speed and lighting on/off.
Safety Precautions
- Please operate the remote controller under normal environmental conditions. The remote controller is not designed to be shockproof, pressure-resistant, moisture-resistant, or impact-resistant. Please keep it in a safe place when not in usage.
- Do not mix “new and old batteries” or “batteries of different brands” or “batteries made of different materials” to avoid affecting or damaging battery life and functionality of the remote controller.
- If the remote controller is not used for an extended period, please remove batteries to prevent battery leakage and damage to remote contoller.
- RF wireless signals are susceptible to interference from transformers and metal shields. Please keep a distance from such sources of interference. If it is necessary to enclose the remote controller in a metal casing, make sure to extend the antenna outside.
Note: The translation provided is for reference purposes. Please consult
the original user manual or contact the manufacturer for accurate and official
instructions.
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Specifications
Appearance dimension
Model: AMA-RF01
Rated Voltage: 3.0V
Operating Temperature: 10°C ~ 45°C
Storage Temperature: 5°C ~ 55°C
Operating Frequency: 315 MHz
Functional Interface