DaXian YH-UACO88 Dream Fantasy User Manual
- May 15, 2024
- DaXian
Table of Contents
DaXian YH-UACO88 Dream Fantasy
Product Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limit: FCC approved for uncontrolled environment
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
Installation:
Ensure the equipment is connected to a power outlet on a circuit separate from the TV or other devices to prevent interference. Maintain a minimum distance of 20cm between the radiator and your body during installation.
Operation:
Follow the guidelines provided in the user manual for safe and efficient operation. Avoid making changes or modifications to the unit that are not approved by the manufacturer.
Maintenance
Regularly inspect the equipment for any signs of damage or wear. Keep the device clean and free from dust or debris that may affect its performance.
Troubleshooting:
If you encounter any issues with the equipment, refer to the troubleshooting section of the user manual or contact customer support for assistance.
FCC
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Produet Description
Product Introduction
The product series mainly adopts a self-developed color sensing sereen
synchronization solution, suitable for esports and home TV scenes. It not only
achieves sereen and light “in syne”, but also supports sound and light
“intimate interaction”. The TV Light color sensing light strip, as the main
device, can link with sub devices to achieve full house lighting illusion
linkage, supporting color sensing screen synchronizer linkage, music rhythm
linkage, and other scene linkage. This will mean that when we are playing
games or watching movies, indoor lighting will create a more immersive
environmental atmosphere for us. In addition, this series of products can not
only be controlled locally through mobile apps, but also support remote
control for local control.
Product Architecture Diagram
The product series shown in Figure I below consists of four parts: the main
device (TV light strip), the sub device (linked light bulb), the app, and the
Bluetooth remote control. After the main device activates linkage, it sends
linkage data through Bluetooth. After receiving the linkage data, the sub
devices maintain the same lighting effect as the main device. At the same
time, sub devices can be grouped according to actual application scenarios,
with different lighting effects between different groups, achieving dreamy
linkage of lighting effects. The main device and sub devices can be controlled
separately through the APP and remote control.
Instructions For Use
Equipment Installation Instructions
Quick Installation
-
Preparation before installation
a. Check whether the light strip is complete, connect the light strip controller and the light strip, and power on to check whether the light strip can light up normally;
b. Wipe the back of the TV/computer to keep the surface clean and free of moisture. -
Installation steps
Affix the light strips to the back of the TV /computer, press them tightly, and then fix the light strips with other fixings such as clips;
Place the color sensor on the top center of the TV, aiming at the area of the
screen you want to color;
Insert the light strip, power adapter and color sensor cable into the control box;
Fix the control box in a suitable position near the TV ;
Power up the strip lights and try connecting them with the uLamp app. See 3.3
APP Instructions for Use.
Instructions for the use of the main device buttons
Short press on/off, no long press function.
APP Instructions
Download Method
-
Scan the QR code to download
-
App Store download or App Store download ¡OS users can search for “uLamp” on the App Store to download Android users abroad can search for “uLamp” on Google Play to download; Android domestic users can search for “uLamp” in the app store to download
Software Introduction
uLamp App is an independently developed intelligent electrical lighting
equipment management software. Through this software, users can achieve remote
control, device linkage, and device status analysis of intelligent electrical
lighting products, breaking through spatial limitations, greatly improving
user experience, and enjoying a truly intelligent life!
Function Usage
Device Addition
Open the uLamp App, the home page of the App without adding a device is shown
in Figure 2 below.
After the device is powered on, click the “Add Device buttonor”+” button at the bottom of the home page toenter the deviceadding page, and select the correspondingTV Light to add, as shown in Figure 3
Figure 4 shows the successful device addition page. After the deviceis added successfully, the device name can be modified. After saving.it will enter the first page of the device details page by default. Thedevice details page can control the main device switch, turn on/o flinkage, switch scenes, etc., as shown in Figure 5
Device Details Page
- Main equipment TV Light switch button;
- Click to modify the main device name;
- Scene mode, corresponding to the 4 scene categories of 6, there are 12 scene modes in total, namely: Iceland Blue, Glacier Express, Cloud Sea Color Scenery, Game, Holiday, Work, Christmas, Valentine’s Day, Halloween, Summer Pastoral, Sea dreams, love and dreams;
- Click to enter the segmented smearing color page, which supports global smearing, segmented smearing, erasing, as well as colored cards and recommended combination colors;
- Color sensor work on/off button;
- DIY scene mode, click the “+” button to enter the DIY page, support settings such as full segment/segment, effect, color, brightness, speed, etc.;
- Scene mode/color adjustment. Corresponding to 3, 4, 6;
- Music rhythm mode, supports 6 kinds of music rhythm modes, namely: rock, jazz, classical, rolling, energy, spectrum;
- Linkage. Click to enter the sub-device grouping page, a maximum of 7 groups are supported, all groups can be enabled/disabled linkage at the same time, or a single group can be enabled/disabled linkage.
- Settings. Supports the settings of countdown, number of lamp beads and line sequence
Linkage Function
On the group page, click the “+” button to create a group. Currently, a
maximum of 7 groups are supported. Creating a group supports modifying the
group name. After the group is created, it directly enters the group and
displays the list of sub-devices that can be added, as shown in Figure 6.
After the sub-device is bound to the group, return to the linkage page, the created group and the added device will be displayed on the page one by one, as shown in Figure 7.
- Globally enable/disable linkage, which is valid for all sub-devices that have been bound to the group;
- The linkage of a single group is turned on/off.
Frequently Asked Questions and Answers
Can I modify the unit without voiding the warranty?
No, any changes or modifications not approved by the manufacturer may void the warranty and user authority to operate the equipment.
What should I do if I experience interference during operation?
Increase the separation between the equipment and receiver or consult a TV technician for further assistance.
Is it safe to operate the equipment close to my body?
No, maintain a minimum distance of 20cm between the radiator of the equipment and your body as per FCC regulations for radiation exposure limits.
How to factory reset (reset) the main and sub-devices?
The main device and the sub-device are restored to factory settings for 3 times of continuous power-on and power-off™
. How to pair the remote control with the main device and sub-device?
Within 30s after the main device is powered on, press and hold the remote control button * on/off to pair, the pairing is successful, the green light flashes 3 times; the main device does not need to be powered on again to unbind, and the pair is unpaired by long pressing the remote control button 3 TV, and the red light flashes 1 Second-rate. When the sub-device is not paired with the remote control, all keys are controllable. If you want to control it in groups, within 30s of power-on, press and hold the group button to bind the group, and the green light flashes twice; within 30s of power-on, long-press the sub-device Group key to unbind this group, the red light flashes 2 times
What is the sub-device grouping rule?
One group can be bound to multiple sub-devices, and one sub-device can only be bound to one group.
. When the sub-device is in the linked state, can the App and the remote control deliver static/dynamic lighting effects?
A sub-device in the linked state can interrupt the linkage function of the sub-device when the app or remote control sends static/dynamic lighting effects. Brightness/speed adjustment is not controllable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>