Mohu VIBEXG Vibe Amplified Compact Indoor TV Antenna User Manual

: May 15, 2024
: moHU

Table of Contents

Mohu VIBEXG Vibe Amplified Compact Indoor TV Antenna
Product Information
Product Usage Instructions
BOX INCLUDES
Connections
Troubleshooting Tips
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mohu VIBEXG Vibe Amplified Compact Indoor TV Antenna

Product Information

Specifications:

Product Name : Vibe Amplified Indoor HDTV Antenna
Model Number : VIBEXG
Coaxial Cable Length : 12 ft. (3.7 m)
Includes : Wall Screw, Anchor, Jolt Switch Amplifier

Product Usage Instructions

Connecting the Antenna:

Attach the antenna’s coaxial cable to the connector located on the amplifier as shown.

Mounting the Antenna

Use the included wall screw and anchor to hang the antenna on a
wall as shown.

Improving Reception:

If reception is sporadic, try moving the antenna to another location and rescanning the TV. Placing the antenna in a higher location or close to a window may result in better reception.

FAQ

Q: What should I do if the reception is poor?
- A : Try moving the antenna to a different location, preferably higher or closer to a window, and rescan your TV channels for better reception.

BOX INCLUDES

Connections

Attach the antenna’s coaxial cable to the connector located on the amplifier as shown.
Connect the coaxial cable coming from the amplifier to the ANT/IN connector on the back of the TV. The amplifier gives you control in real-time when managing your TV signals. The simple ON/OFF switch allows you to bypass amplification when a TV channel doesn’t need it. The amplifier arrives in the ON position, increasing TV signals for a clearer picture and sound.
When the switch is OFF, easily bypass the amplifier while signals are still being filtered from cellular and FM interference. You only need to rescan for channels if you move or reconnect the antenna.
The amplifier must be powered for amplification. Plug the amplifier’s USB cable into an open USB port on the back of the TV. If your TV does not have a USB port, use a USB power adapter (not included) with any standard 120V wall outlet.
Use the included wall screw and anchor, as shown, to hang the antenna on a wall.
In the TV’s setup menu, set the tuner mode to “Antenna” or “Air”. Then, set the TV to “scan” for channels. This may be listed as auto-program, auto-scan, channel search, or channel scan. Refer to the TV manual for detailed instructions.
If reception is sporadic, try moving the antenna to another location and rescanning the TV. Placing your antenna in a higher location or close to a window may result in better retention. You must rescan whenever vou move the antenna..

Troubleshooting Tips

Amplifier Regulatory Notice: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no quarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the antenna.
Increase the separation between the equipment and the converter box.
Connect the equipment to an outlet on a different circuit from which the converter box is connected.
Consult the dealer or an experienced radio/TV technician for help.

*MOHU™ WARRANTY**

Mohu warrants to the original purchaser of this product that for a period of one (1) year from the date of purchase, the product shall be free of defects in materials or workmanship, and will repair or replace, at its sole option, any defective product at no charge. In the event, that Mohu chooses to replace the product, such a replacement product may be a different model than the one originally purchased.

This warranty shall not cover any damage arising from improper use of the product, including without limitation, damage due to acts of nature (including without limitation weather-induced power surges and the like),
use of the product in non-residential settings, accident, misuse or improper electrical/signal connections, improper installation, tampering, negligence, or product abuse.

This warranty is valid only in the USA and Canada. There are no implied warranties of merchantability or fitness for a particular purpose unless otherwise required by law, and any such implied warranties are limited to the one (1) year term of this warranty.

If you have any difficulties with the installation of your antenna, please contact Mohu.

Questions?

GoMohu.com/knowledge-base
OR
Contact Mohu Support