STERNGLAS ZEITMESSER Marus Automatic Dive Watch User Manual
- June 5, 2024
- STERNGLAS ZEITMESSER
Table of Contents
Manual
Marus
How to set up your timepiece
|
---|---
-
Before you can start, you have to loosen the screw-down crown by unscrewing it from the winding. Carefully turn the crown counterclockwise until you feel the resistance ease. The crown is now in position 1.
-
In the next step, you have to „wind up” your timepiece. To do so, wind the crown (in position 1) clockwise about 15 times.
You will notice that the mechanism in the movement moves and a slight whirring sound can be heard. -
Now you are ready to set the time. To do so, pull the crown to position 3 and turn until the hands are in the correct position.
-
To set the date, push the crown to position 2. Wind the crown clockwise until the correct data is displayed.
-
To secure the crown into the case again, move it to position 1.
With a little counterpressure while turning it clockwise, screw it back into the thread. Keep screwing until the crown does not move any further.
Note: Your date changes at noon? This is because the movement does not „know” if it is noon or midnight. If so, simply wind your timepiece forward by 12 hours.
You would rather have a different strap on your timepiece? No problem, changing it couldn‘t be easier.
| |
---|---|---
-
On the back of your strap, you will find a small metal pin.
Slide this inward. -
The band can then be easily detached from the watch case.
-
Now you can attach a new strap to your timepiece. To do so, do the same thing again: push back the metal pin and then release it to let the new strap snap into place. Make sure you attach the short side to the upper side of the watch. Final check: Is everything securely in place? Done.