sbs TEEARTWSORCBTK TWS Earphones with Headband User Guide

May 15, 2024
sbs

sbs TEEARTWSORCBTK TWS Earphones with Headband

sbs-TEEARTWSORCBTK-TWS-Earphones-with-Headband-PRODCUT

OVERVIEW

sbs-TEEARTWSORCBTK-TWS-Earphones-with-Headband-FIG-1

SPECIFICATION

  • Wireless: V 5.3
  • Working Range: 10m
  • Audio Frequency: 24Hz-24kHz
  • Case Battery: 300mAh
  • Earbuds Battery: 35mAh
  • Power Input: 5 V D.C. 1A max
  • Impedance: 320
  • Sensitivity: 42dB
  • Charging Port Type-C
  • Playing Time: 5 hours
  • Charging Time: 1,5 hours
  • Standby Time: 24 hours
  • f: 2402 ÷ 2480 MHz
  • PRF: 6 mW Max

Charging the earbuds

IMPORTANT NOTICE

  • FULLY CHARGE THE HEADPHONES THE
  • FIRST TIME THEY ARE USED
  • REMOVE THE PROTECTIVE STICKERS
  • FROM THE CHARGING PINS

Insert the earbuds into the charging case, the LEDs will light up. Once charging is complete, the LEDs will turn off.

Charging the case

  • Insert the Type C connector of the supplied cable into the Type C port on the case and the other end into a USB port.
  • The LED on the case will start flashing during charging.

Powering on earbuds
Remove the earbuds fromthe charging case: they will automatically turn on and pair with each other, or press both MLF buttons on the earbuds for 5 seconds.

Turning off the earbuds
Insert the earbuds into the charging case: they will turn off automatically.
When the earbuds are not paired with a device and are out of the charging case, they will automatically turn off after 2 minutes, or press the MLF buttonon one of the earphones for 10 seconds.

Pairing with a device

  1. Take the earbuds out of the charging case: they will automatically turn on and pair with each other.
  2. Turn on Bluetooth® on the device and search for “SBSSPARKLY” in the list of available devices, then select it.
  3. After the first pairing with the device (if Bluetooth® is turned on the earbuds will automatically pair each time they are removed from the case.

Functions summary

If the two earbuds do not pair with each other and both LEDs are flashing, they need to be reset: press the MLF button on the earbuds twice in succession and place them back in the charging case.Remove the earbuds and wait until they are recognised and paired correctly.

SBS spa – Via Circonvallazione s/n 28010 Miasino (No) – Italy
sbsmobile.com

TEEARTWSORCBT

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals