Aqua-Vu MO-POD 3 Camera Panning Accessory User Guide

June 4, 2024
Aqua-Vu

Aqua-Vu MO-POD 3 Camera Panning Accessory

Aqua-Vu-MO-POD-3-Camera-Panning-Accessory-product-
image

CAMERA PANNING ACCESSORY

Aqua-Vu-MO-POD-3-Camera-Panning-Accessory-01

Aqua-Vu MO-POD 3 Quickstart Guide and FAQ’s
  1. Remove top cap lid to battery compartment. Lid screws off counter clockwise.
  2. Install 2 new AA batteries.
  3. Replace lid.
  4. Turn MO-POD 3 to On by toggle switch found on the underside of the MO-POD.
  5. Adjust MO-POD 3 base legs to exceed size of hole.
  6. Deploy camera to desired depth and secure cable to the S-Hook of MO-POD 3.
  7. Use Wireless remote to pan the camera 360-degrees clockwise or counter clockwise.
  • DO NOT TURN MANUALLY (by hand), as this will damage the gears.

FAQ & Trouble Shooting

Q: Can the MO-POD 3 be used with a 10-inch hole?
A: Yes, the legs will fold completely flat with loosening of the string.

Q: My MO-POD 3 will not turn?
A: Please double check the power switch and change the batteries.

Q: My MO-POD 3 still does not turn?
A: Your MO-POD 3 may need to be synced to the remote. Visit the link below and search MO-POD 3 for a video on this process

Scan to visit our Video
Resource Library for additional tips & instructional content.

STOP PLEASE READ BEFORE USING
Our Goal is 5 Star Service! If you should encounter difficulty using your Aqua-Vu MO-POD 3 or feel there may be something not working correctly, we are here to help. Before returning your MO-POD 3 or leaving negative feedback, please give us the opportunity to make things right at one of the methods below:

Call our support staff at: 866-755-6303 or
Chat with us live on our site: www.aquavu.com or
Review our Quickstart Guide/FAQ’s for the MO-POD 3 on opposite side of card.

Scan to visit our Video
Resource Library for additional tips & instructional content.

www.aquavuhelp.com

ONE YEAR LIMITED WARRANTY
Outdoors Insight, Inc. warrants its products to be free from defects in materials and workmanship for a period one-year from the original date of purchase. Out-doors Insight, Inc will at its sole discretion repair or replace any components that fail in normal use. Failures caused by abuse, misuse, alteration, or self-repair are not covered under warranty. The warranty is valid for the original owner and is non-transferable.

CUSTOMER SERVICE
We want our products to provide you with a pleasant on-the-water/ice experience. That means maximum customer satisfaction. If you have a problem with your Aqua-Vu unit please contact Outdoors Insight, Inc. Customer Service at one of the following methods:

PHYSICAL ADDRESS:

  • Stop by during business hours 8am to 4pm M-F Central
  • Our address is: 33703 Antler Road, Crosslake MN 56442

The Address for Returns is:
VIA USPS:
Outdoors Insight, Inc.
PO Box 368
Crosslake, MN 56442
VIA UPS/FEDEX:
Outdoors Insight, Inc. 33703 Antler Road Crosslake, MN 56442

MOPOD

Motorized Remote Control Camera Positioner

  • Rugged Adjustable Tripod (for up to 15” ice holes)
  • Wireless Remote Control Pans a full 360°
  • Easy-to-Access Battery Compartment
  • 2 AA Batteries (not included)
  • Compatible with all Underwater CamerasAqua-Vu-MO-POD-3-Camera-Panning-Accessory-product-image

Wireless remote control included.

360-degree underwater fish surveillance!

Aqua-Vu-MO-POD-3-Camera-Panning-Accessory-03

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals