SILVA MR200 Work Light or Headlamp User Manual
- June 12, 2024
- SILVA
Table of Contents
FULL VERSION MANUAL
MR200
CHOOSE YOUR LANGUAGE:
PRODUCT OVERVIEW
The packaging consists of the following parts:
- Headlamp unit
- Head band
- 3xAAA batteries
- Helmet bracket including 3M adhesive
- Quick guide
BEFORE USE
INSERT BATTERIES
Open the lid on the right-hand side of the headlamp by turning the lid
counter clock wise.
Note polarity markings inside the headlamp body and insert the batteries.
Note!
- Make sure to close the lid when the batteries are inserted to assure water protection.
- Do not mix brands of batteries
- Do not mix new and old batteries
ADJUST THE HEADBAND
The elastic headband with anti-slip rubber on the inside is designed to give a
comfortable fit at all times. Adjust the headband by movng the sliding buckle
to fit it onto your head.
HELMET MOUNT
The included clip is used ether as a helmet attachment or a clip for example
your belt or straps etc.
Mount the clip to your helmet using the included double adhesive tape.
To mount the headlamp to the clip you simply push the headlamp into the clip.
To release the headlamp form the clip you push on the release area and at the
same time pull the headlamp out of the clip.
DURING USE
SWITCH ON YOUR HEADLAMP
On the left-hand side of the headlamp body there is a push button which
controls all light modes.
Each press on the button gives you the following light:
- Turns the headlamp ON in max mode.
- Switches to Min mode
- Switches to Blink mode
- Starts over from 1
To turn OFF the headlamp; press and hold the button for 1 second.
BATTERY STATUS INDICATION
When the headlamp is turned OFF, a small LED is turned on inside the front of
the headlamp to indicate the status of the batteries. This indication will be
on for 3 seconds.
Green light – Battery in good condition
- Orange light – Battery in medium condition
- Red light – Battery needs to be replaced
AFTER USE
MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it
regularly with a damp cloth. Headset cleaning – wash in washing machine at
40ºC.
TECHNICAL SPECIFICATIONS
Headlamp weight incl batteries:………………………………….. 86 g
Battery type: ………………………………………………………………3xAAA alkaline
Water resistance: ………………………………………………..IPX7
Operative temperature range:………………………………… -20ºC – +60ºC
Storage temperature: ……………………………………………..-20ºC – +35 ºC
PROTECT
THE ENVIRONMENT.
Headlamp and batteries should be recycled and must not be thrown in the
regular trash. Dispose these items in accordance with applicable local
regulations.
WARRANTY
Silva warrants that, for a period of two (2) years*, your Silva product will
be substantially free of defects in materials and workmanship under normal
use. Silva’s liability under this warranty is limited to repairing or
replacing the product. This limited warranty extends only to the original
purchaser.
If the Product proves defective during the warranty period please contact the
original point of purchase. Make sure to have your proof of purchase on hand
when returning the product. Returns cannot be processed without the original
proof of purchase. This warranty does not apply if the product has been
altered, not been installed, operated, repaired, or maintained in accordance
with instructions supplied by Silva, or has been subjected to abnormal
physical or electrical stress, misuse, negligence or accident. Neither does
the warranty cover normal wear and tear. Silva is not responsible for any
consequences, direct or indirect, or damage resultant from use of this
product. In no event will Silva’s liability exceed the amount paid by you for
the product. Some jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you. This warranty is valid and may be processed only in the
country of purchase.
- Batteries: one (1) year
For more information please visit www.silvasweden.com