SVITOO P-Pad Tablet PC User Manual

August 12, 2024
SVITOO

SVITOO P-Pad Tablet PC

Product Information

Specifications

  • Compliance: Part 15 of FCC Rules
  • Radiation Exposure Limits: FCC approved
  • Operating Distance: Minimum 0cm between radiator and body

Product Usage Instructions

Important Safety Information

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Installation

  1. Place the device on a stable surface.
  2. Ensure there is a minimum distance of 0cm between the radiator and your body during operation.

Operation

  1. Connect the device to a power source as per the provided instructions.
  2. Follow the user manual for specific operational guidelines.
  3. Monitor for any interference and adjust positioning if necessary.

Maintenance

  1. Regularly clean the device using a soft, dry cloth.
  2. Avoid using harsh chemicals or solvents for cleaning.

FAQ

Q: What should I do if I experience interference while using the device?
A: If you experience interference, try repositioning the device to minimize any potential sources of interference. Ensure no other electronic devices are causing the interference.

Android User Manual Setup Guide
This setup guide will help you get started, select system language,time zone, connect to Wi-Fi, set up your username, and device name.

Button Functions

  • Power button:. ……………….
    • When the device is off, long press power button for 3 secs to turn on the device.
    • When the device is on, short press power button to tur on/off screen.
    • When the device is on, long press power button for 3 secs to access the shutdown interface, long press for 10 secs to force shut down the device.
  • Volume+ button: Press to increase the volume.
  • Volume- button: Press to decrease the volume.

Virtual Button Bar

Control Center

FUNCTION

Wi-Fi Connection

  1. Open Settings and go to Network & Internet setting.
  2. Turn on Wi-Fi, choose a wireless network, and enter the network password to connect.

Cellular Connection

  1. power on the system.
  2. Open Settings and go to Network & Internet setting.
  3. Turn on cellular data toggle.
    Applicable to supported devices only.

Bluetooth Connection

  1. Open Settings and go to Connected Device setting.
  2. Turn on Bluetooth and system will automatically search for Bluetooth devices nearby.
  3. Click on the connectable Bluetooth device then select Pair in the pop-up menu.
  4. Wait for the Bluetooth device to confirm pairing.
    Applicable to supported devices only.

Display

Open Settings and go to Display setting.

  1. Brightness: Slide the bar to adjust screen brightness.
  2. Wallpaper: Set the wallpaper.
  3. Sleep: Set screen time-out.
  4. Font size: Set the size of system fonts.
  5. Auto-rotation: Lock current screen orientation or automatically rotate the screen based on device orientation.

Sound

Open Settings and go to the Sound setting.

  1. Volume: Slide the bar to adjust the volume of media, alarm, and ringtone.
  2. Notification: Set notification sound.
  3. Ringtone: Set incoming call ringtone.
  4. Other Sounds: Set lock screen and touch sound effects

Battery Status
Open Settings and go to Battery setting to view battery usage.

Battery Indicator: Toggle the switch to display battery percentage.

Connect to PC
Device can be connected to a PC using a USB cable to copy or delete data on the device.

  1. Operating systems including Windows 7 and above will automatically install MTP drivers when the device is connected to a PC.
  2. For Windows XP, Windows Media Player 11 must be installed before the device can be connected.

Application Management

Open Settings and go to Application setting to uninstall apps, clean cache & data, and force close apps.

  1. Third-party applications: can be uninstalled.
  2. System applications: cannot be uninstalled.

Users
Open Settings and go to User setting.

  1. System supports multi-user login.
  2. Each user can set their personal applications and content.

Location
Open Settings and go to Location setting

  1. Toggle Use Location switch to turn on/off location services.
  2. View recent location requests and configure location permission on a per-app basis.

Security
Open Settings and go to Security setting,

  1. Screen lock modes: choose between swipe, pattern, pin, and
  2. Unknowim sere: allow/deny app installation from unknown sources

Language and Input
Open Settings and go to Language and Input setting.

  1. Language: select system language.
  2. Input: select the default system input method and its respective setungs

Accounts Management

Open Settings and go to Accounts setting.

  1. Add accounts for installed applications.
  2. Manage data syncing for existing accounts.

Factory Reset

  1. 0pen Settings and go to System Setting, Advanced, Reset Options to perform a factory reset.
  2. Factory reset will erase all personal data, please backup your data before resetting.

Date and Time
Open Settings and go to Date and Time setting.

  1. Automatic date & time: turn on to automatically sync to local time when connected to the internet. You can manually adjust the date and time by turning off this function.
  2. Automatic time zone: turn on to automatically sync to local time zone when connected to the internet. You can manually adjust the time zone by turning off this function.
  3. 24-hour format: choose between AM/PM and 24-hour display formats.

USB OTG function

This device supports USB OTG function to exchange data with other portable devices (flash drive, mobile hard disk, mouse, and keyboard).

  1. Devices need to be connected to this device via an OTG cable.
  2. Please keep battery above 50% while using OTG function. A separate power supply is needed for high-power consumption devices.

Charger Specifications

  • Charger specs should match the input voltage/current shown on the back of the product.
  • Please only use chargers that meets the above specification.
  • Please do a full recharge every 3 months if the product is going to stay unused for an extended period.
  • For first use after storage, the product may require a 30 minute charging session before charging status is indicated.

Shenzhen Chuanzheng Technology CO.,Ltd

Official website : www.svitoopad.com

Technical support: chuanzheng@svitoopad.com
Made in China

Warranty Rules

Dear Customer,
Thank you very much for using our products, Please read the rules carefully.

  1. One year warranty
    According to the prescription, the period for protecting to fix our company’s tablet is one year. (From the day when you have the invoice) During this period, any belongs to under normal usage circumstance cause because of the product quality’s problem of breakdown, our company will be responsible for giving free maintain.

  2. Free maintain won’ t be given under the following circumstance:
    Without Protection to fix warrantees.

    • The device is out of the warranty period.
    • The damage caused by customer inappropriate preservation, maintain, or the usage.
    • The serial number on the back cover is too dim to recognize if it is Svitoo products.
    • The breakdown caused by the manipulation that hasn’t follow the requests of the manual.
    • The breakdown, row harm or damaged because of the move or drop.
    • The breakdown and the damage caused by the force majeure.
    • The breakdown caused careless protection on the way to service center
    • The damage caused by the dismantled movement of a non-our-company authorized maintainer.
  3. Customer responsibility

  4. Users should take the responsibility of the data safety

  5. Please back up all your important data before send your tablet to our service center.

  6. Svitoo will not take the responsibility of the data missing.

  7. Screen is easy-broken accessories, please avoid the damage from drop or crash. otherwise you should pay the extro fixing fee.

  8. Please carefully check the screen before purchase the tablet .

  9. Svitoo reserves all the right for the final explanation.

Warranty Card

  • Model No.:
  • Reseller Name :
  • User’ s Name:
  • Address:
  • E-Mail:
  • Serial No.:
  • Phone:
  • Phone:
  • Model No.:
  • Serial No.:

Please contact with your sellers or local distributors for after sales service.

FCC STATEMENT

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals