CHARGE AMPS EVC-ACC077 Dawn Single Pole Mount Instruction Manual
- May 15, 2024
- CHARGE AMPS
Table of Contents
CHARGE AMPS EVC-ACC077 Dawn Single Pole Mount Instruction Manual
Safety
- The product must only be installed by a qualified electrician in accordance with the Installation
- National usage requirements and restrictions
- Inspect the product for visible damage before
- Never attempt to repair or use the product if it is damaged. The product must only be repaired by a qualified
- Make sure to switch the power off at the main switch before installation or service. Improper use may create a risk of personal
- Make sure all cables are correctly
- Double check all screw termanials after
- Avoid combustible materials to be used in the
- Never attempt to disassemble the product in any other way than described in this
Technical data
Respect the environment! Must not be discarded with household waste! This product contains electrical or electronic components. Leave the product for separate collection and proper treatment at a designated location e.g. the local authority’s recycling station.
Approved in conformity with the relevant EU directives and UK
legislation.
Neglecting to follow and carry out the directions, instructions and safety
precautions in this Installation Manual implies that any warranty provisions
will be cancelled and that Charge Amps can reject any and all claims for
compensation in connection with any injuries/damage or incidents– direct or
indirect – that are a result of such negligence.
Charge Amps does not give any warranties as to the accuracy or completeness of
this document and shall have no liability for the consequences of using such
information. The manufacturer reserves the right to make changes to
information published in this document without notice.Visit
www.chargeamps.com for the latest document
releases.
© Copyright Charge Amps AB. All rights reserved. Copying, amending and
translating are strictly forbidden without prior written approval from Charge
Amps AB.