Bolaiman F9-5 Wireless Headset Instructions
- May 15, 2024
- Bolaiman
Table of Contents
Bolaiman F9-5 Wireless Headset
Specifications
- Input current: 5V–1A
- Output current: 5V-1A
- Battery type: 3.7V
- Charging time: 1-2 hours
Specification of Earbuds
- Product Name: Earbuds
- Wireless version: V5.1
- Protocol: Supports HFp 1.7, HSP 1.2, AVRCP 1.6, SPP 1.2 and PBAP 1.0
- Peaker diameter: 8mm
- Working distance: 10m-20m
- Play Music Time: 5-6H (1-time full charged)
- Standby time: 650H (With charger case)
- Frequency: 2402MHz~2480MHz
- Battery type: 3.7V, 30mA Li Battery
- Charging Time: 1-2H
- Working Temperature: -10°-55
Specification of charger case
- Input current: 5V–1A
- Output current : 5V-1A
- Battery type: 3.7V
- Charging time :1-2H
How to operate the earbuds
- Make sure that the charging case has electricity. if the charging compartment is out of power, please fully charge the charming compartment;(Pick up the two earbuds and put them back on the cover, The charging compartment indicator lights up to indicate that there is power, lf it does not light, it means no power.)
- Take the two earbuds out of the charging case and wear them on the left and right ears respectively. The earphones willautomatically turn on and automatically pair;(Voice promnpt: poweron, left channel, right channel, waiting for connection).,
- Turn on the phone Bluetooth and click on the connection pair name 5.1 ” to connect (voice prompt “Connected”).
How to pairing
Warming remain
For the first time use the earbuds or for a long time to no use. please charge
the charging case and earphones before, Please keep it in an unobstructed and
effective environment within 10 meters. Otherwise, it may be stuck and
disconnected.
Indicator description
- Charge the earbuds: Put the earbuds into the charging case and cover it to charge. earbuds indicator: Lights up red when charging, and red light when fully charged. The charging case flashes green and the light is off after charging.
- Charge the charging case: Plug the 5V/1A USB into the charging port to charge. During charging, the middle digit of the charging stand display indicates the charging case power. When the number is displayed as “100”, the battery is fully charged. Charging case indicator light: The charging flashes a green light, and the light is off after charging.
- Charge to the mobile phone; 3 Charge the mobile phone: Connect the USB Cable to the USB port of the case to charge the mobile phone.ChargingCase indicator light :
Light will turn green when charging and turn off when fully charged Inmaster- slave synchronous binaural mode, double-click on one of the headphones is the previous song, and double-click on the other headset is the next song!
Single Earbud
ModeReminder, For the first use, please put the 2 earphones in the charging
bay and activate for a few seconds, so that the earphones will automatically
turn on when you pick them up, and the automatic binaural teaming will be
successful. Then turn on the Bluetooth function of the mobile phone to search
for signals. After finding the signal, click to connect, After the connection
is successful, if you want to use it with one ear, you can put one of them in
the charging bay without switching the signal connection, The earphone is not
divided into the main and auxiliary ears, and the two ears are seamlessly
docked, which is very easy to use.
Meadset signal name”L” Headset signal name: F9″R” Headset signal name:
F9Notice: If you find that 2 earphones cannot listen to music at the same time please check if there are 2 identical signals in the Bluetooth management of the mobile phone. if so, please delete the 2 signals turn off the Bluetooth function of the mobile phone, and then put the earphones in the charging compartment. Pick it up, and the headset will automatically turn on and automatically team up, wait until one of the lights is off, and search for the signal after turning on the Bluetooth function of the mobile phone, if there is a signal, just connect it directly!
Special Note: The two earbuds are well paired before packaging, but if they can not paired well due to some wrong operations, pls.do as following steps to re-pair the earbuds. Power off the two earbuds, then press the button of the two earbuds at the same time and do not release for about 10, blue lights sparkled alternatively–>release –>twoearbuds are in the situation of paired, and they are ready for phone searching
Note: This operation also clears the team record between the phone and the earbuds, so you need to delete the Bluetooth pairing record before the phone and then search for the connection again
Care and maintenance
- To avoid any misoperation caused by collision put the earbud in a charging case before put in your pocket
- Do not use an abrasive cleaner to clean the Bluetooth earbuds
- Do not expose the Bluetooth earbuds to excessive temperature
- Do not expose the earbud under the blazing sun for a long time
- Do not let the Bluetooth earbuds be close to the fire source
- Do not drop, bump, scratch, twist, tap, crush, or put into the water
- Keep away from magnets, appliances, and speakers when using Bluetooth earbuds.
- Do not place the Bluetooth earbuds in extreme temperatures (use ambient operating temperature range -10°C-55°C)
- Do not expose the Bluetooth earbuds to moisture.
- If you have not used the Bluetooth earbuds for a long time, please charge them fully and charge them once a week to extend the life the Bluetooth earbuds
Safety guidance
- Please use the standard 5V charger (4.9-5.5V)
- Do not place the charging case and the Bluetooth earbuds next to the flammable explosives.
- Do not disassemble the charging case and Bluetooth earbuds, or insert other items into the product to avoid damage to the product or even cause harm to you.
Serious warning
Do not use this product while charging. Please use the adapters specified by
the manufacturer to charge the product. Do not disassemble the built-in
lithium battery. Do not let the metal contact or short the electrode. Do not
touch or squeeze the battery to avoid piace in a humid or hot
(>60.°C)environment.
FCC
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used per the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following monctiroc.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statements
- FCC Warning Statement: Changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
- FCC Radiation Exposure Statement: The device meets general RF exposure requirements and can be used in portable conditions without restriction.
- FCC Compliance: This device complies with Part 15 of FCC Rules and must not cause harmful interference while accepting any received interference.
FAQ
- Q: How long does it take to charge the earbuds?
- A: The earbuds take approximately 1-2 hours to fully charge.
- Q: Can I use any charger to charge the device?
- A: It is recommended to use a standard 5V charger (4.9-5.5V) to charge the device.