Laser Karaoke Machine SPK-KARA20 User Manual
- June 6, 2024
- Laser
Table of Contents
Laser Karaoke Machine SPK-KARA20
Included Accessories
Product Specifications
Net Weight | 1.9kg |
---|---|
Gross Weight | 2.2kg |
Unit Size | 310x145x190mm |
Power Output | 15Wx2 |
Frequency Range | 100Hz-20KHz |
Power Supply | 5V/2A (1800mAh) |
- Power ON/OFF
- AUX Input when using 3.5mm cable
- Micro SD Card – 32Gb and formatted to FAT32 or exFAT file systm
- USB – 32Gb and formatted to FAT32 or exFAT file system
- DC5V – Insert Micro USB cable to charge
– Red LED indicates charging
– A full charge will take approx 8-12hrs
– Microphones will need to be charged separately (see bottom of mic for input)
-
MODE:
Tap to swap between MODES – Bluetooth, USB, AUX and Micro SD Card -
LED MODE:
Tap to turn front LED Light ON/OFF -
MUSIC-ORIG:
Tap to reduce voice and certain sounds during music playback (results will vary based on music) -
Tap to play previous track or press and HOLD to reduce volume
-
Tap to PLAY/PAUSEV6.
-
Tap to play next track or press and HOLD to increase volume
For more helpful guides visit us at
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>