X13sCH-f/Ln4f
QuICk referenCe guIde 1.00

Contact Information

• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 408-503-8000, Fax: +1 408-503-8008

For your system to work properly, please download appropriate drivers/images/user’s manual from the links below:

• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm

Package Contents

• One Supermicro Motherboard
• One Quick Reference Guide
• One I/O Shield
• One SATA Cable

WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Motherboard Layout and Features

CPU Installation

Heatsink Installation

Front Control Panel

Note: Graphics shown in this quick reference guide are for illustrational purposes only. Your components may or may not look exactly the same as drawings shown in this guide.

Jumpers and Connectors

Jumpers

Jumper| Description| Default Setting
JBT1| CMOS Clear| Open (Normal)
JPG1| VGA Enable/Disable| Pins 1–2 (Enabled)
JPME2| ME Manufacturing Mode| Pins 1–2 (Normal)
JWD1| Watchdog Timer| Pins 1–2 (Reset)
Connectors

Connector| Description
BMC_LAN| Dedicated BMC LAN Port
B1| Onboard Battery
COM1| COM Port
COM2| COM Header
FAN1–FAN5
FANA, FANB| CPU/System Fan Headers (FAN1: CPU Fan)
JBPNI2 C1| 4-pin BMC External I2 C Header
JF1| Front Control Panel Header
JIPMB1| 4-pin BMC External I2 C Header (for an IPMI card)
JL1| Chassis Intrusion Header
JLD1| LAN3 Link Activity LED Header (X13SCH-LN4F only)
JLD2| LAN4 Link Activity LED Header (X13SCH-LN4F only)
JPCIE4| PCH SLOT4 PCIe 4.0 x4 (in x8) Slot
JPCIE6| CPU SLOT6 PCIe 5.0 x16 Slot
JPCIE7| CPU SLOT7 PCIe 4.0 x4 (in x8) Slot
JPI2 C1| Power I2 C System Management Bus (Power SMB) Header
JPW1| 24-pin ATX Power Connector
JPW2| 8-pin CPU Power Connector
JS1| Intel®  PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10 support)
JSEN1| Inlet Sensor Header
JTPM1| Trusted Platform Module (TPM)/Port 80 Connector
JUIDB1| UID Switch
LAN1–LAN4| 1GbE LAN Ports
X13SCH-F only: LAN1–LAN2
X13SCH-LN4F only: LAN1–LAN4
M.2-P1
M.2 NVME,
M.2-P2
M.2 NVME| M.2 PCIe 4.0 x4 Slots from PCH (Supports M-Key 2280 and 22110)
MH1–MH7, MH12| Mounting Holes
MH10–MH11,MH13–MH14| M.2 Mounting Holes
USB0/1| Back Panel USB 2.0 Ports

Note: Refer to Chapter 2 of the User Manual for detailed information on jumpers, connectors, and LED indicators.

Connectors and LED Indicators

Connectors

Connector| Description
USB2/3, USB4/5| Front Accessible USB 2.0 Headers
USB6/7| Back Panel USB 3.2 Gen 1 Ports
USB8| Front Accessible USB 3.2 Gen 1 Type-A Header
USB9/10| Front Accessible USB 3.2 Gen 1 Header
VGA| VGA Port
LED Indicators

LED| Description| Status
LED1| Unit Identifier (UID) LED| Solid Blue: Unit Identified
LED3| PCIe M.2-P2 Activity LED| Blinking Green: M.2-P2 Active
LED4| Power LED| LED On: Onboard Power On
LED7001| PCIe M.2-P1 Activity LED| Blinking Green: M.2-P1 Active
LEDM1| BMC Heartbeat LED| Blinking Green: Device Working

CPU Support
The X13SCH-F/LN4F motherboard supports an Intel® Xeon® E-2400 or 12th Generation Pentium (Socket V0 – LGA 1700) processor with up to eight cores.
Memory Support
The X13SCH-F motherboard supports up to 128 GB of DDR5 ECC UDIMM memory with speeds of up to 4400 MT/s in four memory slots. Note that this motherboard supports 4400 MT/s with the one DIMM per channel population configuration.

Back Panel I/O Connectors

Rear I/O Ports

| Description

1| COM1
2| VGA
3| BMC LAN
4| USB0 (USB 2.0)
5| USB1 (USB 2.0)
6| USB6 (USB 3.2 Gen 1)
7| USB7 (USB 3.2 Gen 1)
8| LAN1
9| LAN2
10| LAN3 (X13SCH-LN4F only)
11| LAN4 (X13SCH-LN4F only
12| UID Switch

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/motherboard installation instructions.

© 2023 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro’s written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.

MNL-2554-QRG-100

References

• P65Warnings.ca.gov
• Supermicro Data Center Server, Blade, Data Storage, AI System
• Supermicro Data Center Server, Blade, Data Storage, AI System
• Supermicro Data Center Server, Blade, Data Storage, AI System

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>