ALTITUDE 108L56MWHMWH Laritza 56-Inch LED Indoor/Outdoor Ceiling Fan Instructions
- June 12, 2024
- Altitude
Table of Contents
ALTITUDE 108L56MWHMWH Laritza 56-Inch LED Indoor/Outdoor Ceiling Fan
Altitude Fan Product Information
The Altitude fan is a high-quality ceiling fan designed for optimal cooling and energy efficiency. It features a DC motor with powerful magnets, resulting in up to 70% less energy consumption compared to standard fans with AC motors. The fan comes with a handheld remote-control transmitter for easy operation.
Altitude Fan Usage Instructions
-
Step 1 – Start by turning the Power Off to all Altitude fans using the standard wall-mounted on/off switch. If you have the fans wired directly to a circuit breaker, then turn off the power at the circuit breaker
-
Step 2 – After power is turned off for all the fans, go to the first fan with the remote in hand and Restore Power going to that fan by use of the wall-mounted on/off switch.
-
Step 3 – Within 30 seconds of restoring power, press and hold the Power Button on the remote control for at least 5 seconds.
[ Note: Do not press any other button on the remote control before pressing and holding down the power button located on the remote control. Doing so will cause the procedure to fail ] During this time,you should see the Green Indicator Light Flashing on the remote. A beeping sound indicates the learning process is complete and your remote has paired with the fan using a unique code for that fan only. -
Step 4 – Press any of the Speed or Light Buttons on the remote to ensure the remote is operating the fan properly.
[ Note: The DC motor uses powerful magnets and must align before starting so it is normal to see the blades moving back and forth before it starts spinning. Upon startup the blades may appear to be slow at first. This is also normal as the fan’s motor is trying to use the least amount of energy to get the fan up to speed. DC motors use up to 70% less energy than standard fans with AC motors ] -
Step 5 – If the fan is Working Properly the next step is to turn the Power Off to that fan by use of the standard wall mounted on/off switch. You must turn the Power Off before following the learning process for other fans
[ Note: If you find one handheld remote controls multiple fans, this is due to multiple fans having power to them during the learning process on any single fan. You need to start the pairing process from Step 1 again] -
Step 6 – Repeat the process for other fans
Disclaimer: Altitude fans cannot be wired to any type of wall-mounted fan control device or dimming device. Wire the fan to a single standard wall mounted switch only. It isnot possible to wire the fan with two wall-mounted switches to control the fan motor and fan light independently from each other. The fan is designed to be operated with the handheld remote-control transmitter only
Call us 1-833-888-FANS (3267) or Email us at
support@altitudefans.com
Visit www.altitudefans.com/install for
installation video tutorials and product support.
Note: Altitude fans cannot be wired to any type of wall-mounted fan
control device or dimming device. They should be wired to a single standard
wall-mounted switch only. The fan is designed to be operated with the handheld
remote-control transmitter only.
If you have any further questions or need assistance, please contact us at
1-833-888-FANS (3267) or email us at
support@altitudefans.com. You can also
visit www.altitudefans.com/install for
installation video tutorials and product support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>