Skullcandy Rail True Wireless Earbuds User Manual

June 13, 2024
Skullcandy

skullcandy-LOGO

Skullcandy Rail True Wireless Earbuds

skullcandy-rail-true-wireless-earbuds-PRODUCT

Download the Skull-iQ™” App

Download the SkuliQ App

Scan to get started.
Warranty information at: skullcandy.com/warranty

Auto Power – On/Off

  • Auto On – Remove buds from Case
  • Auto Off – Place buds into Case

Power – On

Off Mode
Either bud

Power- On
On/off

Power – Off

Pairing Mode

Pairing Mode

Pair New Device

Pair New Device

Play/Pause Answer/End

Play/Pausa-Answer/End

Track Forward

Track Forward

Stay-Aware Mode

On/Off

Stay-aware mode on/off

One Touch to Spotify

Find With Tile™

Both Earbuds
*Tile App Required

Pair TieTM

Re-Sync Earbuds

Both Earbuds

  • While On
  • Bluetooth Disconnected

Re-sync earbuds

Charge Earbuds

Earbud LED’s turn RED to indicate charging.

Charge Earbuds

Charge the Case

Reset Paired Device List

Both earbuds

  • While ON
  • Bluetooth Disconnected

Reset Device

Voice Control

*Skull-iQ™ App Required

Voice Control Commands

Questions Visit: www.skullcandv.com

EN Speaker Driver: 6mm, Impedance: 22 Ohms, THD <3%@50KHz-10KHz, Voltage
Regulation: 3.7v, Bluetooth® 5.2, Frequency Band: 2,402GHz – 2.480GHz, Maximum
Power 121dBm Weight- 62 5^ FR Driver Président- §mm Imnédance: 22 Ohms

EN Skullcandy and other marks are registered trademarks of Skullcandy, Inc. Al rights reserved

Maximum operating temperature 45°C.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
  • Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement
This device contains license-exempt transmitters)/receivers) that comply with Innovation. Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1 )This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.

1-YEAR GLOBAL WARRANTY

Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’l make it right, For aims, questions, or Terms & Conditions:
U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL All other countries: visit Skulcandy.com/support/international-support Many electrical items can be repaired or recycled, saving natural resources and the environment, If you do not recycle, electrical equipment will end up in landfill where hazardous substances wil leak out and cause soil and water contamination harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed out wheeled bin symbol in your bin.
Many Local Authorities wil have containers that collect batteries for recycling.
Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances wil leak out and cause soil and water contamination – harming wildife and also human health.
Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be dispose of separately  from household waste, When this product reaches its end of Ife, take it to collection point designated by local authorities or return to purchase location for recyding on doposal.

ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 Wkg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

CAUTION
Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;a battery subjected to extremely low air pressure that may result in an explosion of the leakage of flammable liquid or gas.

Americas
Skullcandy, Inc.
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.com

Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1A4 Canada
Skullcandy.ca

EN Contains Li-ion battery. Battery must be
recycled or disposed of proper

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals