GardenJoy ‎FH-6912S Cordless Power Drill Instruction Manual

GardenJoy ‎FH-6912S Cordless Power Drill

YOUR PRODUCT

• 1. 3/8 keyless chuck
• 2. 24+1 torque adjustment clutch
• 3. 2-speed gear control
• 4. Forward/reverse direction button
• 5. Battery pack
• 6. Battery pack release button
• 7. Variable speed tigger switch
• 8. LED work light
• 9. Goggles
• 10. Charger
• 11. 9pcs socket set
• 12. lOpcs screwdriver bits
• 13. lpcs hex screwdriver bit
• 14. 4pcs drill bits

FUNCTION OF ACCESSORIES

Name of accessories| ****

Picture of Accessories

| ****

Use of Accessories

---|---|---

Drill Bits

| ****

| ****

For drilling wood, ordinary steel, aluminum, plastic and other materials.

NOTE: The drill bit is made of ordinary carbon steel and is not suitable for drilling hardened metal materials after heat treatment.

Flat drill Woodworking

| |

For driving into wood, iron plate and other materials.

screwdriver bits

|

| ****

For riveting and unscrewing screws of different specifications.

Hex screwdriver bits

| ****

| ****

For riveting and unscrewing of hexagon socket screws

Socket

| ****

| ****

Screwing for Hux nut

DRILL WARNINGS:

WARNING: Read all safety warnings & instructions. Failure to follow the warnings and instructions may result in electric shock and/or injury. Save all warnings and instructions for future reference.

Work area safety

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite dust or fumes.
• Keep bystanders and children away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid bodily contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools orpull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately.Damaged cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor usereduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs,alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Safety equipment such as a dust mask, non-slip safety shoes, hard hat, or hearingprotection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off- position before connecting to the power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the sw1tc? or energizing power tools that have the switch on invites accidents.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
• Remove adjusting keys or spanners before turning the tool on. A spanner or a key that is left attached to a rotating part of the tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection.

Power tool use and care

• Do not force tools. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
• Do not use a power tool if theswitch does not turn it on or off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce risk of starting the tool accidentally.
• Store idle power tools out of the reach of children and other untrained persons. Power tools are dangerous in the hands of untrained users.
• Maintain tools with care. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
• If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
• Use only accessories that are recommended by the manufacturer for your model.
• Accessories that may be suitable for one  tool may become hazardous when used on another tool.

Battery tool use and care

• Ensure the switch is in the Off position before inserting the battery pack. Insert the batterypack into power tools that have the switch on invites accidents.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water.
• If liquid contacts eyes, immediately seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

• Have your power tool service by qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional warnings applicable for drills

• Use auxiliary handles supplied with the tool.
• Loss of control can cause personal injury.
• Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
• Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
• Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this work site.
• Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust.
• Use thick cushioned gloves and limit the exposure time by taking frequent rest periods. Vibration caused by hammer-drill action may be harmful to your hands and arms.
• Secure the material being drilled. Never hold it in your hand or across legs. Unstable support can cause the drill bit to bind causing loss of control and injury.
• Disconnect battery pack from tool before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.
• Position the cord clear of rotating bit. Do not wrap the cord around your arm or wrist. If you lose control and have the cord wrapped around your arm or wrist it may entrap you and cause injury.
• Position yourself to avoid being caught between the tool or side handle and walls or posts. Should the bit become bound or jammed in the work, the reaction torque of the tool could crush your hand or leg.
• If the bit becomes bound in the work piece, release the trigger immediately, reverse the direction of rotation and slowly squeeze the trigger to back out the bit. Be ready for a strong reaction torque. The drill body will tend to twist in the opposite direction as the drill bit is rotating.
• Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated.
• When installing a drill bit, insert the shank of the bit well within the jaws of the chuck. If the bit is not inserted deep enough, the grip of the jaws over the bit is reduced and the loss of control is increased.
• Do not use dull or damaged bits and accessories. Dull or damaged bits have a greater tendency to bind in the work piece.
• When removing the bit from the tool avoid contact with skin and use proper protective gloves when grasping the bit or accessory.
• Accessories may be hot after prolonged use.
• Do not run the drill while carrying it at your side. A spinning drill bit could become entangled with clothing and injury may result.
• WE RECOMMEND THAT THE OPERATOR WEARS HEARING PROTECTION.
• The declared vibration total value has been measured in accordance with standard test method and may be used for comparing one tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
• WARNING: The vibration emissions during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, and of the need to identify safety measures to protect the operator that are based on an estimate of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as times when the tool is switched off and when it is running idle in addition to trigger time).

BATTERY WARNINGS:

• Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and pZroduct using battery.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning use of the appliance in a safe way and understanding the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
• Use only the charger which accompanied your product or direct replacement as listed in the catalogue or this manual. Do not substitute any other charger. Use only same supplier approved chargers with your product. See Technical Specifications.
• Do not disassemble charger or operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
• Do not recharge battery in damp or wet environment. Do not expose charger to rain or snow. If battery case is cracked or otherwise damaged, do not insert into charger. Battery short or fire may result.
• Charge only same supplier approved rechargeable batteries . See Technical Specifications. Other types of batteries may burst causing personal injury and damage.
• Charge battery pack in temperatures above ° 0 c and below 45° C. Store tool and battery pack in locations where temperatures will not exceed 45° C. This is important to prevent serious damage to the battery cells.
• Pull the plug rather than cord when disconnecting charger or when disconnecting cords using the daisy chain feature. This will reduce risk of damage to electric plug and cord.
• Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock.
• Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
• The charger is designed to operate on standard household electrical power (100-240 volts, 50-60 Hz AC only). Do not attempt to use it on any other voltage.
• This power unit is intended to be correctly orientated in a vertical or floor mount position.
• DO NOT incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.
• DO NOT charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.
• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention. A WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.
• Charge the battery packs only in the charger which accompanied your product.
• DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.
• DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 45° C(113 °F) (such as outside sheds or metal buildings in summer).
• When batteries are not in tool or charger,  keep them away from metal objects. For example, to protect terminals from shorting
• DO NOT place batteries in a tool box or pocket with nails, screws, keys, etc. Fire or injury may result.
• DO NOT put batteries into fire or expose to high heat. They may explode.
• DO NOT short-circuit the battery (connect the positive and negative poles of the battery directly), otherwise the battery will be damaged, and heat will cause the battery to burn.
• DO NOT drop the battery into the water.
• Dropping into the water will cause the battery protection function to fail. Therefore, the battery will be short-circuited and the battery will burn.
• The electric drill must not be used in rainwater environment. If it is used in rainy weather, the protection of the control panel will fail and cause a short circuit, which will cause the battery to become hot due to instantaneous high current discharge, which will damage the battery or cause burning.
• The battery cannot be dropped at a height of more than 1 meter, otherwise the internal components will be damaged, and serious risks such as short circuit and burning will occur.
• DO NOT disassemble the battery privately or try to penetrate the battery with a sharp object, because the electrolyte spray inside the battery may cause fire and injury to the human body.
• For batteries that will not be used for a long time, store the batteries separately. And take it out and charge it every 3 months.
• The battery should be stored in a cool, dry place, away from direct sunlight.
• When storing the battery, do not mix it with metal objects

Specifications

OPERATING INSTRUCTIONS FOR DRILL DRIVER

NOTE: Before using the tool, please read the instruction book carefully.

BEFORE PUTTING INTO OPERATION

CHARGING THE BATTERY

WARNING: The battery charger supplied is matched to the Li-ion battery installed in the machine. Do not use another battery charger. Place the battery pack and charger on a flat non-flammable surface and away from flammable material when re- charging the battery pack.

1. lnsert the plug on the charging unit into a power socket and turn the power on if required. When the battery is fully charged,the green light will turn on. (SEE B)
2. The charging output interface insert battery of charging port. Note: The battery will require 1 hours charging time after normal use.

TO REMOVE OR INSTALL

BATTERY PACK(SEE A)

Depress the battery pack release button (3) to release and slide the battery pack out from your tool. After recharge, slide it back into your tool. A simple push with slight pressure will be sufficient.

• 1. Cordless Drill
• 2. Battery Pack
• 3. Battery Release Button

ON / OFF SWITCH (SEE C)

Press the On/Off switch (7) to start your drill and release it to stop your drill. The on/off switch is equipped with a brake function, when you quickly release the switch, it will immediately stop your chuck. It is also a variable speed switch that can provide higher speed and torque with increased trigger pressure. The speed is controlled by the switch trigger pressure.

SWITCH LOCK

The switch trigger can be locked in the OFF position. This helps reduce the possibility of accidental startup when not in use. Place the direction button (4) in the center position to lock the switch trigger.

REVERSIBLE (SEE D1, D2)

For drilling and screw driving use clockwise rotation (4) marked ” t ” it is moves to the left). Only use Counterclockwise rotation marked ” J ” (it is moves to the right) to remove screws or release a jammed drill bit.

WARNING! Never change the direction of rotation when the chuck is rotating, wait until it has stopped!

TWO VARIABLE SPEED GEAR CONTROL (SEE E)

The drill has 2 variable speed gear control (3) designed for drilling or driving at LOW speeds(mark is 1) or HIGH speeds(mark is 2) . When using the drill in the LOW speed range, the speed will decrease and the drill will have greater power and torque. When using the drill in the HIGH speed range, the speed will increase and the drill will have less power and torque.

• GEAR 1
  Low speed range: for screw driving or working with large drilling diameter

• GEAR2
  High speed range: for working with small drilling diameter

CHUCK ADJUSTMENT (SEE F)

Please rotate the front of the chuck to open the chuck claws.Insert the drill bit between the chuck jaws, make sure the drill bit is in the center of the chuck jaws, and rotate the front part in the opposite direction,your drill bit will be clamped in the chuck.

TORQUE ADJUSTMENT (SEE G)

(SCREW DRIVING FORCE OF YOUR DRILL DRIVER)

Adjust the torque by rotating the torque adjustment ring. When the torque adjustment ring is set at a higher position, the torque is greater. When the torque adjusting ring is set at a lower position, the torque is smaller.

USING THE LED LIGHT (SEE H)

The LED light (8) provides superior visibility when working in dimly lit spaces. To turn on the light simply press the on/off switch. When you release the on/off switch, the light will go out..

MAGNETIC DESIGN(SEE I)

With magnetic design, it can absorb screws, drill bits and release your hands.

USING YOUR DRILL

• IMPORTANT: Before starting inspect your drill bit to ensure there is no excessive wear and that it is sharp. Never use a drill bit if it is damaged or blunt.
• Check that the drill bit is correctly fitted in the chuck and is the correct type for the material you wish to drill a hole in.

Drilling wood

• Ensure the piece of work you want to drill into is firmly anchored in place. Hold the drill in a straight line with the end of the drill bit.
• Apply enough pressure to keep the drill bit cutting through the wood.

When drilling through wood with a twist bit it may over heat if you do not clean any chips and wood dust out of the flutes (grooves in the drill bit). To do this:

• Stop the drill by taking your finger off the power trigger.
• Switch the direction button into reverse then press the trigger until the drill bit is clear of the wood.
• Use a brush to remove any scraps or dust from the drill bit. DO NOT use your fingers.
• Switch the direction button into forward to continue drilling into piece of work.
• Note: If you are drilling into a piece of wood that is likely to splinter you may want to use a ‘back-up’ block of wood place behind the piece you are drilling.
• You will drill a cleaner hole if you ease up on the pressure just before the bit breaks through the back of the wood. Turn the wood over and complete the hole.

Drilling metal

There are two main things to remember when drilling through metal.

• The harder the material, the greater the pressure you need to apply to the drill.
• The harder the material, the slower the speed of the drill needs to be.

Below are a few tips to help when drilling through metal.

1. Lubricate the tip of the drill bit occasionally with cutting oil except when drilling soft metals such as aluminium, copper or cast iron.
2. lf the hole you wish to drill is quite large, drill a smaller hole first then enlarge to the final size. This is generally a faster method in the long run.
3. Maintain enough pressure to assure that the drill bit does not just spin in the hole. This will make the drill bit blunt and shorten its life.

IMPORTANT

If you have any issues,please feel free to contact us Via

• E-mail: supportl@Sstartool.com
• (24-hour customer service)

FrequentlyAsked Questions

What type of chuck does the GardenJoy FH-6912S Cordless Power Drill feature?

The GardenJoy FH-6912S Cordless Power Drill is equipped with a 3/8 keyless chuck for easy bit changes.

What is the purpose of the 24+1 torque adjustment clutch on the GardenJoy FH- 6912S Cordless Power Drill?

The 24+1 torque adjustment clutch allows you to adjust the torque settings for precise control over your drilling and driving tasks.

How many speed options does the GardenJoy FH-6912S Cordless Power Drill offer?

This drill features a 2-speed gear control, providing versatility for various drilling and driving applications.

How can I change the direction of rotation on the GardenJoy FH-6912S Cordless Power Drill?

You can change the direction of rotation using the forward/reverse direction button conveniently located on the tool.

Does the GardenJoy FH-6912S Cordless Power Drill come with a battery pack?

Yes, this drill comes with a battery pack for cordless operation.

How do I release the battery pack from the GardenJoy FH-6912S Cordless Power Drill?

To release the battery pack, simply press the battery pack release button and slide the pack out from the tool.

What is the function of the variable speed trigger switch on the GardenJoy FH- 6912S Cordless Power Drill?

The variable speed trigger switch allows you to control the speed of the drill based on the amount of pressure applied to the trigger.

Does the GardenJoy FH-6912S Cordless Power Drill come with LED work light?

Yes, this drill is equipped with an LED work light to provide illumination in dark or dimly lit workspaces.

What safety accessories are included with the GardenJoy FH-6912S Cordless Power Drill?

Safety goggles are included to protect your eyes during drilling and driving tasks.

Does the GardenJoy FH-6912S Cordless Power Drill come with a charger?

Yes, a charger is included for conveniently recharging the battery pack.

What additional accessories are provided with the GardenJoy FH-6912S Cordless Power Drill?

This drill comes with a 9-piece socket set, a 10-piece screwdriver bits set, a hex screwdriver bit, and 4 drill bits.

What are the recommended uses for the accessories included with the GardenJoy FH-6912S Cordless Power Drill?

The drill bits are suitable for drilling wood, ordinary steel, aluminum, plastic, and other materials.

Video- Product Overview

Download the PDF:GardenJoy ‎FH-6912S Cordless Power Drill Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>