AMPIRE KC302 Color Rear-View Camera Owner’s Manual

AMPIRE KC302 Color Rear-View Camera

Precautions

• Pay utmost attention if you install the camera into the driver’s compartment.
• Use only in right vehicles.
• Make the correct connections.
• Do not damage pipe or wiring when drilling holes.
• Arrange the wiring so it is not crimped or pinched by a sharp metal edge.
• Do not install the camers in locations which might hinder vehicle operations and do not install in locations with any moisture. Use the installation materials provided with the camera.
• Warning! Wrong installation may damage the vehicles electronic! Pay utmost attention on instructions of the vehicles manufacturer. This camera is developed for motor vehicle use only.
• Do not use chemical cleaners or solvents to clean the reversing camera. This may damage the plastic components or lens of the camera. Clean the reversing camera with a clean, soft, wet cloth.

Environmental Reference

• Old electronic devices do not belong in the garbage can.
• If you later want to dispose of this device, remove all cables and batteries and dispose of them separately at a recycling facility in your area.
• Alternatively, you can return this device to Ampire for disposal.
• The packaging is recyclable. Dispose of the packaging in a designated collection system.

Environmental instructions and information on the disposal of electrical and electronic equipment including batteries (applicable to countries that have adopted a separate collection system)
If you want to dispose of this product, do not dispose of it with your normal household waste. There is a separate collection system for used electronic equipment in accordance with legal requirements that require appropriate treatment, recovery and recycling. Contact your local authority for details on finding a recycling facility in your area. Proper recycling and disposal helps to conserve resources and prevent harmful effects on our health and the environment.

Connection

1

|

Black

|

(-) Ground

---|---|---

2

|

Red

|

(+) 12V (reversing lamp wire)

3

|

RCA Yellow

|

Video Output

4

|

White Loop

|

Cut for backup line

5

|

Green Loop

|

Cut for no mirror image

Choose “Surface” or “Flush” installation and assemble the camera according to the manual.

• Surface: Install the Camera on a right place.
• Flush: Drill a 19mm hole into the right place and press the camera carefully into the hole.
• Run the wire harness and seal its hole to the driver’s compartment to avoid Flooding. Connect the wire according to the description above.
• ATTENTION, isolate the cut wires to avoid short circuits!

Technical Data

Hereby Ampire Electronics GmbH & Co.KG declares that the reversing camera KC302 complies with the directives 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity in German language is available at the following Internet address: https://www.ce.ampire.de

• Since its founding in 1987 Ampire Electronics has only one goal, to provide the best possible Autoalarm-, Autohifi- and Multimedia products, which are available on the international market. All manufacturing facilities and suppliers are certified according to ISO 9001 and QS-9000. Ampire quality products are sold worldwide.
• An Ampire customer service is available in many countries.
• For more information about distributors in your territory please call: + 49-2181-81955-0.
• We are focused on future oriented development of user friendly products.
• The outstanding high quality standards, functionalities and designs of our products are unique in the market. ” German Development” is taken literally in AMPIRE.

Langwadener Straße 60 D-41516 Grevenbroich info@ampire.de

Support

+49 2181-81955-0 support@ampire.de

References

• Ampire Autoalarmanlagen, Multimedia- und Rückfahrsysteme

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>