SEALEY TSP126-6 Thermal Super Grip Gloves Instructions

SEALEY TSP126-6 Thermal Super Grip Gloves

Product Information

• Specifications
  • Product Name: Thermal Super Grip Gloves (Large)
  • Model No: TSP126/6
  • Packaging: Pack of 6 Pairs
  • Size: Large CE Marked and conforms to BS EN 388:2016 2-2-4-2-X

Product Usage Instructions

• Introduction
  • The Thermal Super Grip Gloves feature a nitrile-coated palm for superior grip and dexterity, with good abrasion resistance.
  • The breathable open-back design ensures comfort during use. This product is CE Marked and conforms to BS EN 388:2016 2-2-4-2-X.
• Safety
  • It is important to follow these safety guidelines:
  • Avoid wearing gloves near moving machinery parts to prevent entanglement.
  • Inspect gloves before each use and replace them if damaged.
  • Avoid contact with fire.
• Applicable Standards
  • The gloves meet the following mechanical hazard standards:
  • Abrasion Resistance: 2
  • Blade Cut Resistance: 2
  • Tear Resistance: 4
  • Puncture Resistance: 2
• Maintenance
  • Storage
  • Proper storage is essential for maintaining performance:
  • Store gloves in their original packaging in clean, ventilated premises with normal temperature and humidity conditions.
  • The performance will not significantly reduce when stored appropriately.
  • Aging will not significantly affect design performance under appropriate storage conditions.
• Obsolescence
  • The design performance of the gloves is not significantly affected by aging when stored in suitable conditions.

FAQs

• Q: Can these gloves be used near fire?
  • A: No, these gloves should not be in contact with fire to prevent damage or injury.
• Q: How should I store the gloves?
  • A: Store the gloves in their original packaging in clean, ventilated premises with normal temperature and humidity conditions.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

REFER TO INSTRUCTIONS

• IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

Nitrile-coated palm gives superior grip and dexterity. Good abrasion resistance. Breathable open back. CE Marked and conforms to BS

• EN 388: 2016 2-2-4-2-X.
• Sizes: TSP126/6 (Large)
• Notified Body: 0075
• Type Examination Certificate Number: 0075/1022/162/10/19/3084
• Carried Out By  CTC

SAFETY

• Users should be warned that gloves should not be worn when there is a risk of entanglement by moving parts of machines.
• This model does not contain any substances at levels that are known to, or suspected to, adversely affect user hygiene or health.
• The protection against risks or hazards which are not mentioned in this document is not warranted.
• The levels of performance mentioned are only valid for the palm of the glove. (7G Polyester terry liner; black foam latex coated on palm.
• These levels of performance are obtained from the tests done according to the conditions defined by the applicable standards.
• This glove shall not be in contact with fire.
• The gloves should be inspected before each use, and replaced if damaged.
• For gloves with two or more layers of material, the performance levels are warranted only for the whole glove.
• For gloves with two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer.

APPLICABLE STANDARDS

MAINTENANCE

STORAGE

• Store the gloves in their original packaging, in normal temperature and humidity conditions in clean ventilated premises.
• When stored in appropriate conditions, the performance of this product will not be significantly reduced.
• The design performance can not be significantly affected by aging when stored in appropriate conditions (humidity, temperature, clean, ventilated light.

OBSOLESCENCE

The design performance is not significantly affected by aging when stored in appropriate conditions (humidity, clean, ventilated light). This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION

• Recycle unwanted materials instead of disposing of them as waste.
• All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment.
• When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
• REGISTER YOUR PURCHASE HERE
• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

CONTACT

• Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
• Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
• 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk.
• © Jack Sealey Limited
• Original Language Version
• TSP126/6 Issue 1 27/11/23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>