VVB XJ058 Docking Station Dual Monitor Instruction Manual
- May 15, 2024
- VVB
Table of Contents
VVB XJ058 Docking Station Dual Monitor
Specifications:
- Weight: 105g
- Dimensions: 65x110mm
- Ports: USB 3.0 (3 Ports), USB-C Port, HDMI 1, HDMI 2
- Power Delivery: Up to 100W
- HDMI 1 Resolution: 4K at 30Hz
- HDMI 2 Resolution: 1080P at 60Hz
- USB 3.0 Data Speed: Up to 5Gbps
Product Usage Instructions
Connecting the USB C HUB:
Connect the USB C HUB to your MacBook Pro/Air or Windows Type C Laptop
using the USB-C port.
Using USB Ports:
Utilize the USB 3.0 ports for data transfer at speeds up to 5Gbps. These
ports also support power output of 5V/0.9A. Power Delivery:
The USB-C port supports Power Delivery (PD3.0) with a charging capacity of
up to 100W. Use this port for upstream charging of source devices like laptops
or MacBooks. HDMI Ports:
Connect your display devices to the HDMI ports. HDMI 1 supports 4K
resolution at 30Hz while HDMI 2 supports 1080P resolution at 60Hz. FAQ:
-
Q: Can all ports on the USB C HUB be used simultaneously?
A: Yes, all ports on the USB C HUB can be used simultaneously, allowing you to expand your device’s capabilities efficiently. -
Q: What is the maximum power output of the USB-C port for charging?
A: The USB-C port supports Power Delivery up to 100W for charging source devices like laptops and MacBooks. -
Q: Do I need drivers to use the HDMI ports?
A: HDMI 1 provides driver-free operation for 4K resolution at 30Hz, while HDMI 2 requires drivers for optimal performance at 1080P resolution and 60Hz.
Product Introduction
This 6 in 1 USB C HUB Multiport Adapter is a best accessory for Macbook Pro/Air and windows Type C Laptops. Expand your Mac and laptop’s capabilities simply and all ports can be used simultaneously
Interface
-
USB 3.0 (3 Ports):
Up to 5Gb/s data speed & maximum power output 5V/0.9A, backwards compatible with USB2.0/USB1.1 -
USB-C Port: Power Delivery (PD3.0)
Upstream charging the source devices such as Laptop/MacBook, charging limited to 87-96W for safety and affected by different firmware. Support 100W power adapter -
HDMI 1: 4K 30Hz, driver-free, requires USB-C DP alt-mode port
-
HDMI 2: 1080P 60Hz, driver-required (MST on Windows and Mac OS, including M1,M2)
Package Content
- 6 in1 USB C HUB
- Instruction Manual
- USB C PD 100W
- HDMI1 4K 30Hz
- USB3.0 5Gbps
- HDMI2 1080P 60Hz
Instruction Manual
-
Plug the hub into the USB C port on your Macbook Pro/Air or Windows laptops.
-
Use the USB C port for PD charging (Max up to 100W)
Notice: This USB C charging port does not work with some laptops which using dedicated AC chargers, like DELL, HP etc. -
Use USB-A 3.0 port for data transfer, up to 5Gbps.
-
Mirror or extend your USB-C laptop screen stream 4K UHD or full HD 1080P video using HDMI port. Double display: One display of HDMl1 output, one display of HDMl2 ,one screen of the laptop.
Driver Install Instruction for MacOS
-
Step 1
Plug the hub into your Macbook, wait seconds and you will see an file installation package in your desk, called “USB DISPLAY”. -
Step 2
Open “USB DISPLAY”, you will see 3 different file, kindly remove file “MSUSBDisplay-macOS” to your desk. -
Step 3
Unzip and follow the steps to install. Please note that the laptop needs to be restarted. -
Step 4
After restart, it will remind you to open Screen Recording.
Note: Click Setting, then Privacy&Security, and choose Screen Recording, open permissions for ms_usbdisplay.
Driver Install Instruction for Windows
-
Step 1
Plug the hub into your Windows, and click “This PC”, you will find an file installation package, called “USB DISPLAY”. -
Step 2
Open “USB DISPLAY”, you will see 3 different file, kindly remove file “MSUSBDisplay-Windows” to your desk. -
Step 3
Unzip and follow the steps to install. Please note that the laptop needs to be restarted. -
Step 4
After restart, connect HDMI cables to your laptop, you can use our hub to extend dual same or different screen.