G GJIA L2210 UFO High Bay LED Light Instruction Manual
- June 1, 2024
- G GJIA
Table of Contents
G GJIA L2210 UFO High Bay LED Light
INSTRUCTION MANUAL
- Thank you for purchasing our UFO Highbay. Please read the bel ow articles carefully to see how to use this product safely.
- Warning contents and attention contents related to product sa fety use, please be sure to follow it.
WARNING
- Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and hazards involved.
- Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any maintenance. Disconnect power at fuse or circuit breaker.
- Risk of Fire- Minimum 90°C supply conductors.
- Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
- Risk of Personal Injury- Due to sharp edges, handle with care.
- Failure to comply with these instructions may result in death, serious bodily injury and property damage.
Attention
1. This UFO High Bay within the input voltage range: 100-277v, 50/60Hz.
2. If input voltage exceeds this range, it may cause the lamp failure. Please
be sure to operate under correct input voltage.
3. Ensure ambient operating temperature of -35℃~50℃.
4. Using this UFO high bay in temperatures outside of this range will reduce
the UFO high bay lifespan.
5. Make sure to turn off power before starting the installation process.
6. IP rating of IP65, can work under damp/wet locations.
7. Please keep the UFO High Bay away from any corrosive substance. When you
clean it, please use damp or dry cloth.
Wiring Diagram
Installation
1. Lock the hook. (Figure 1.)
2. Install and tighten the set screw. (Figure 2.)
3. Hang up the fixture. (Figure 3.)
4. Install the lock screw. (Figure 4.)
Specifications:
- Product: UFO High Bay
- Power: Adjustable (H:100%, M:80%, L:60%)
- Dimming: 0/1-10V
- Installation: Hook, Set Screw, Lock Screw
FAQ:
Q: Can I install this product without professional help?
A: No, installation and maintenance must be done by a qualified electrician.
Q: How do I adjust the power settings?
A: The power settings can be adjusted using the driver provided. Refer to the manual for details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>