TwelveSouth TS-2301 TimePorter Watch Band Wall Mount Owner’s Manual
- June 15, 2024
- twelvesouth
Table of Contents
Time Porter
User guide
Mounting Time Porter
-
First, clean surface with rubbing alcohol.
Do not use household cleaners. -
Remove liner on the Command Strips.
-
Carefully position, press and hold for seconds.
Display up to 6 Apple Watch Bands by gently pressing them into the soft silicone rail on TimePorter.
Adding an additional TimePorter
-
Carefully remove the Endcap on the left or right side of the existing TimePorter.
-
Remove the Endcap and install the Bridge Tab on the merging side of the new TimePorter. Do not remove Command Strip liner.
-
Remove Command Strip liner on capped end and carefully merge the TimePorters and than press and hold for 30 seconds.
Removing TimePorter
-
Carefully remove the Endcaps on both sides of the TimePorter.
-
You can use the Endcap to gently pull and reveal the Command Strip Tabs.
-
Pull the Command Strip Tab straight outward untill it releases. Repeat on both sides.
Get help, watch install videos and learn more:
Visit twelvesouth.com/timeporter-quick-start or contact
support@twelvesouth.com
©Twelve South, LLC. All rights reserved. King St. Charleston, SC – USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>