SEALEY VS716 Clutch Alignment Tool User Manual
- May 15, 2024
- SEALEY
Table of Contents
SEALEY VS716 Clutch Alignment Tool
Product Usage Instructions
Ensure to follow all safety precautions while using the Clutch Alignment Tool:
- Wear approved eye protection, gloves, and appropriate footwear.
- Adhere to Health & Safety, Local Authority Regulations, and workshop practices.
- Do not use damaged tools.
- Maintain tools for safe use and optimal performance.
- Avoid wearing loose clothing, and jewellery, and tie back long hair to prevent accidents.
FAQ
- Q: What are the compatible applications for Model VS716?
- A: The VS716 Clutch Alignment Tool is compatible with Mini One (01 to 06), Mini Cooper (01 to 06), and Mini Convertible (05 to 08) fitted with W10 B14A and W10 B16A engines.
- Q: How should I clean the tool after use?
- A: After use, clean the tool with a soft clean cloth and apply a light coat of oil on the surfaces to prevent corrosion.
- Q: What is the warranty period for the VS716 Clutch Alignment Tool?
- A: The warranty for the product is 12 months from the purchase date, requiring proof of purchase for any claims.
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment is available from your Sealey dealer.
- WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when using tools.
- DO NOT use tools if damaged.
- Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
- Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.
INTRODUCTION
- For clutch plate alignment on 5 speed gearboxes fitted to engine codes (W10, B14A and B16A).
- 6 Speed applications use Model No.VS717.
SPECIFICATION
- Model ……………………………………………………………….. VS716
- OEM Tool equivalent ………………………………………… 21 6 100
Applications
- Mini One (01 to 06)
- Mini Cooper (01 to 06)
- Mini Convertible (05 to 08) fitted with W10 B14A and W10 B16A engines
OPERATION
- Locate the tool to clutch the spigot bearing and engage the tapered section to the clutch plate.
- Ensure a good fit but DO NOT force the alignment tool in such that it causes damage.
MAINTENANCE
- Clean the tool after use with a soft clean cloth and lightly oil the surfaces to prevent surface corrosion.
- Store the tool such that no physical damage can occur to any of its surfaces.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty
- Guarantee is 12 months from purchase date, proof of which is required for any claim.
CONTACT
- Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757500
- 01284 703534
- sales@sealey.co.uk
- www.sealey.co.uk