ZEBRONICS ZEB HT51 Cordless Trimmer User Manual
- June 13, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB HT51 Cordless Trimmer
Thank you for purchasing ZEB-HT51 Trimmer. Please read the user manual carefully before usage & save it for future reference.
- Note Use this product only for its intended use.
- Do not dismantle the trimmer in order to avoid electrical shock & other accidents and this may lead to devoid of warranty.
- Kindly fully charge the device before every use.
- Keep the product and cords away from high temperature and high humidity places
- Avoid using and charging the product with wet hands.
- Do not throw the product into fire.
Features
- Upto 45mins Cordless Use
- Stainless Steel Blades
- Multi-Stage Guide Comb
- Charging LED Indicator
- Ergonomic Design
- Built-In Rechargeable Battery
Specification
- Input Voltage DC 5V
- Usage type Cordless
- Trimmer Body Material Plastic
- Trimming Range 3mm – 9mm
- No. of Guide Combs Attachments Multi-Stage Guide Comb
- Blade material Stainless steel
- Charging time Run time 8h
- Power consumption 2W
- Product dimension 155 × 38 x 40 mm
- (Wx D X H)
- Net Weight 118g
Product Description
- Trimmer Head
- Power Button
- LED
-
Multi-Stage Guide Comb
-
Oil
-
Cleaning Brush
Usage Instructions
- Fully charger the trimmer before every usage for better performance.
- Adjust the clips as per the levels of trimming needed.
- Slide the power switch to On / Off the trimmer.
- To remove the trimmer cap from the blade, slide it out.
Trimmer Cap Adjustment
You’ll be getting all the adjustment in or blade cap.
You can adjust the size by slow sliding the cap step by step.
-
Cleaning the Trimmer after Usage
Kindly remove the trimmer cap from the trimmer blade. -
Use the brush to remove the hairs from the blades of the trimmer blade.
-
Also, clean the trimmer blade of the base with the brush to clean the hair particles.
-
Avoid the usage of the water or other cleaning liquid / solvents for cleaning the trimmer head.
Charging Instruction
The trimmer can be charged with the charging cable that comes with the product. Connect the USB connector of the charging cable to the USB port of a DC5V charger and the other end to the trimmer.